Well...the S2000 needed more doors, more driven wheels, and a lot more torque...
#1841
Ex-OEM King
Thread Starter
Negative, and I don't think I will for a while lol. Would like to keep it out of the ditch/crowds.
You can get precut pieces to replace the stripes with for about $250. The shop quoted me $1200 to do it all so that's definitely off the table until at least next year.
You can get precut pieces to replace the stripes with for about $250. The shop quoted me $1200 to do it all so that's definitely off the table until at least next year.
#1843
Moderator
When in doubt, throttle out. Or, just power through it & into the nearest crowd
#1845
Your Friendly Canadian
Join Date: Dec 2007
Location: Toronto, Ontario
Age: 32
Posts: 17,433
Received 1,491 Likes
on
1,050 Posts
Got any more of them pics?
The following users liked this post:
e30cabrio (07-24-2023)
#1846
I had an 04 S2000. Can't argue the torque comment, but it was super fun to drive. And a great sound with the top down and the VTEC kicking in
Here is a real peach..
https://bringatrailer.com/listing/20...da-s2000-cr-7/
Here is a real peach..
https://bringatrailer.com/listing/20...da-s2000-cr-7/
Last edited by rdx4me?; 07-24-2023 at 06:56 PM.
#1847
Ex-OEM King
Thread Starter
I honestly haven't driven it since I did the ceramic coat last weekend. Will snap some pics when I get it out again.
The only S2k I'm going to own from here on out is the one I sold many years ago. I always ask the guy who bought it from me if he's willing to sell. So far the answer has been no.
I had an 04 S2000. Can't argue the torque comment, but it was super fun to drive. And a great sound with the top down and the VTEC kicking in
Here is a real peach..
https://bringatrailer.com/listing/20...da-s2000-cr-7/
Here is a real peach..
https://bringatrailer.com/listing/20...da-s2000-cr-7/
#1849
Ex-OEM King
Thread Starter
Did my first mods
I'm not sure I'll keep that sticker on the window or not. We'll see, still on the fence.
I'm not sure I'll keep that sticker on the window or not. We'll see, still on the fence.
The following 6 users liked this post by SamDoe1:
00TL-P3.2 (08-04-2023),
1StGenCL (09-09-2023),
CLtotheTL32 (08-11-2023),
e30cabrio (08-11-2023),
pttl (08-04-2023),
and 1 others liked this post.
#1850
Moderator
All looks great, if the Midget had windows, I'd think about a decal like that, but with 2 fewer gears
Maybe a micro version for the vent window on the door.
Maybe a micro version for the vent window on the door.
The following users liked this post:
e30cabrio (08-11-2023)
#1852
Turd Polisher
iTrader: (1)
#1853
Moderator
^ At WOT
#1854
Ex-OEM King
Thread Starter
It was already on and drilled when I bought the car, was likely done by the first owner. At that point you might as well put the plate on. If not drilled, the mount would forever be on backorder.
The Rivian front plate mount is on perpetual backorder, can't seem to get one for some weird reason.
The Rivian front plate mount is on perpetual backorder, can't seem to get one for some weird reason.
The following users liked this post:
e30cabrio (08-11-2023)
#1855
Ex-OEM King
Thread Starter
Will do but it's hard to get videos from outside, will try and have friends video it next time I'm out with them.
I know I'm heavily delinquent on photos of the car and will try and get some ASAP, especially now that it's actually clean after the last random rain storm I got caught in. Nothing to make you pucker up like a known crowd plow running on PSS tires in a rain storm.
I know I'm heavily delinquent on photos of the car and will try and get some ASAP, especially now that it's actually clean after the last random rain storm I got caught in. Nothing to make you pucker up like a known crowd plow running on PSS tires in a rain storm.
#1858
Moderator
#1859
Ex-OEM King
Thread Starter
#1862
Ex-OEM King
Thread Starter
#1863
Moderator
iTrader: (3)
The lack of photos here is disappointing.
The following users liked this post:
CCColtsicehockey (08-22-2023)
#1864
Ex-OEM King
Thread Starter
I know...I'm sorry. And I'm in California for work right now anyway so pics will have to wait a bit longer.
#1865
Moderator
iTrader: (3)
#1866
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,624
Received 3,836 Likes
on
2,572 Posts
The following 3 users liked this post by CCColtsicehockey:
#1867
Ex-OEM King
Thread Starter
First pics from the C&C last week! I will do some better pics eventually, life is really busy right now.
The following 11 users liked this post by SamDoe1:
1StGenCL (09-09-2023),
BreezyTL (08-29-2023),
CCColtsicehockey (08-28-2023),
civicdrivr (08-28-2023),
CLtotheTL32 (08-28-2023),
and 6 others liked this post.
#1868
Moderator
Saw one over the weekend in a darker/off-white with I think gray stripes. Dark parking lot & didn't get a great look.
Gotta say, though, the white/blue stripe > blue/white stripe next to it
Gotta say, though, the white/blue stripe > blue/white stripe next to it
#1869
Three Wheelin'
Great looking car! The spectators that will get mowed down as you leave the C&C are privileged to see it up close
I like the manual sticker, my neighbor made one for me to put on the TL
I did an IMSA plate frame for my car, but I like the manual one you have as well! Did you make it or you found it?
I like the manual sticker, my neighbor made one for me to put on the TL
I did an IMSA plate frame for my car, but I like the manual one you have as well! Did you make it or you found it?
#1870
Ex-OEM King
Thread Starter
The off white ones are the heritage edition cars and have dark blue stripes.
The blue/white one next to mine was a GT350R and the orange one is a GT500 CF track pack with the carbon wheels. Mine is objectively the "worst" of the lot lol.
Great looking car! The spectators that will get mowed down as you leave the C&C are privileged to see it up close
I like the manual sticker, my neighbor made one for me to put on the TL
I did an IMSA plate frame for my car, but I like the manual one you have as well! Did you make it or you found it?
I like the manual sticker, my neighbor made one for me to put on the TL
I did an IMSA plate frame for my car, but I like the manual one you have as well! Did you make it or you found it?
I got both the sticker and the plate frame from etsy. They were both pretty cheap.
#1871
Moderator
Yeah, I only got a passing look at it, so I couldn't tell if the stripes were blue or gray. Dimly lit lot at the local In-n-Out
Of your 3 there, I'd still have yours. The R is tempting & probably my 2nd favorite colorway for the Mustang, outside of the Heritage.
Of your 3 there, I'd still have yours. The R is tempting & probably my 2nd favorite colorway for the Mustang, outside of the Heritage.
The following users liked this post:
00TL-P3.2 (08-28-2023)
#1873
Ex-OEM King
Thread Starter
Thanks, I appreciate it. It's as close to a heritage spec you can get to without paying BIG money for the heritage editions.
#1874
Moderator
iTrader: (3)
Looks great! Love it
#1876
Moderator
6MT for life!
#1877
Whats up with RDX owners?
iTrader: (9)
The following users liked this post:
CLtotheTL32 (08-29-2023)
#1878
Ex-OEM King
Thread Starter
The following users liked this post:
civicdrivr (08-30-2023)
The following users liked this post:
SamDoe1 (08-30-2023)