Steven's C7 Corvette - More Carbon Updates & the ultimate wall art! (12-20-20)
#2841
Moderator
Join Date: Aug 2014
Location: Dirty H-Town, Amerikkka
Posts: 28,432
Received 7,772 Likes
on
5,045 Posts
What is the poster substrate? Is it just poster paper or foam core or laminated or ???
#2842
Team Owner
Thread Starter
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
^^^^^ It's a paper poster.
#2843
Moderator
Join Date: Aug 2014
Location: Dirty H-Town, Amerikkka
Posts: 28,432
Received 7,772 Likes
on
5,045 Posts
Ah. Okay. I was just wondering if it had any thickness or rigidity to it. Was thinking about if you could get some wood angle to cut a frame and then wrap it in CF vinyl to get the effect for not a lot of coin. Not sure how well that would work with just paper though.
The following 2 users liked this post by cu2wagon:
00TL-P3.2 (11-02-2020),
Steven Bell (11-08-2020)
The following users liked this post:
Steven Bell (11-08-2020)
#2845
Moderator
![Genius](https://acurazine.com/forums/images/smilies/genius.gif)
CF vinyl wrapped 1/4 round
The following users liked this post:
Steven Bell (11-08-2020)
#2846
Team Owner
Thread Starter
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
It's literally a poster with double sided tape on it.
#2847
Team Owner
Thread Starter
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
What might be my last Carbon Fiber mods....I can't think of anything else to do!
Guys....this Corvette is over 7 years old now with 42,000 miles on it. Just like my Type S, I've modified this for that long a period of time. Here are the last Carbon Fiber mods for it.....I literally can't think of anything else to do.
First, there were chrome trim pieces around the dash (where the Driver Information Center is). Today I replaced those chrome pieces with Carbon Fiber.
Next, just a small aesthetic idea....I trimmed the air intake in red on the full Carbon Fiber grill.
There is also a Carbon Fiber "extension" on the lower rear of the Corvette. I've trimmed that as well.
At this point, I'm lost and cannot think of anything else to make in Carbon Fiber.......this makes me very sad.
First, there were chrome trim pieces around the dash (where the Driver Information Center is). Today I replaced those chrome pieces with Carbon Fiber.
![](https://cimg0.ibsrv.net/gimg/acurazine.com-vbulletin/1500x2000/67d6411b_ac48_4a96_8dde_9451de5279dd_4d5d574cb25f1d6b9bff3117812339f96003be76.jpeg)
Next, just a small aesthetic idea....I trimmed the air intake in red on the full Carbon Fiber grill.
![](https://cimg3.ibsrv.net/gimg/acurazine.com-vbulletin/2000x1504/21dcd1a5_5e21_4541_9846_85eb52faf927_bddabd907b24af656b6ea40ef445d3373e5705fb.jpeg)
There is also a Carbon Fiber "extension" on the lower rear of the Corvette. I've trimmed that as well.
![](https://cimg9.ibsrv.net/gimg/acurazine.com-vbulletin/2000x1504/1846f0fb_155a_4cf7_a4b2_7207042fcde5_1_201_a_6c328b8acf56dff3ef1980afc1ec4866d91a17f1.jpeg)
At this point, I'm lost and cannot think of anything else to make in Carbon Fiber.......this makes me very sad.
The following users liked this post:
SuperTrooper169 (11-12-2020)
#2848
Moderator
Join Date: Aug 2014
Location: Dirty H-Town, Amerikkka
Posts: 28,432
Received 7,772 Likes
on
5,045 Posts
Headlights? Can you crack them open and get some CF in there somewhere?
The following users liked this post:
Steven Bell (11-11-2020)
#2850
Whats up with RDX owners?
iTrader: (9)
What is this??? There's no weave here.
![](https://cimg9.ibsrv.net/gimg/acurazine.com-vbulletin/1442x872/screen_shot_2020_11_12_at_10_11_51_am_563dd663dd7aa2ad6761efc4e47b84e0dac1fb3e.png)
#2851
Moderator
CF centercaps for the wheels?
CF wiper arms
CF wiper arms
#2852
Moderator
Join Date: Aug 2014
Location: Dirty H-Town, Amerikkka
Posts: 28,432
Received 7,772 Likes
on
5,045 Posts
The following users liked this post:
Steven Bell (11-16-2020)
#2853
Team Owner
Thread Starter
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
#2854
Moderator
Join Date: Aug 2014
Location: Dirty H-Town, Amerikkka
Posts: 28,432
Received 7,772 Likes
on
5,045 Posts
@Steven Bell
It's no CF monster, but in case you need another T-Shirt with your car on it... Today only:
https://www.blipshift.com/products/big-red
![](https://cdn.shopify.com/s/files/1/0166/4148/products/big-red-insta_1000x1000.png)
It's no CF monster, but in case you need another T-Shirt with your car on it... Today only:
https://www.blipshift.com/products/big-red
![](https://cdn.shopify.com/s/files/1/0166/4148/products/big-red-insta_1000x1000.png)
The following users liked this post:
Steven Bell (11-23-2020)
#2855
Team Owner
Thread Starter
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
^^^ Thanks dude!
#2856
Senior Moderator
So.....C8 time? Just saaaayin', if there are no other mods for your (awesome) C7. I'm one of those on board with the C8. Very proud of Chevy for out-italianing the Italians, and then making the price reasonable...
The following users liked this post:
nist7 (12-03-2020)
#2857
Team Owner
Thread Starter
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
^^^ Bob, I'm waiting to see what they come out with on the C8. I was an early adapter on the C7 (mine is #1,445 off the line). So when they came out with the C7 Z06 and ZR1, I was jealous. But I didn't feel like I could get out of my car because I had already done so much with it. So I want to wait and see the variants that come with the C8 and then figure something out.
The following 2 users liked this post by Steven Bell:
BEAR-AvHistory (12-03-2020),
nist7 (12-03-2020)
#2858
Suzuka Master
Join Date: Sep 2006
Location: Raleigh, NC - USA
Age: 82
Posts: 7,674
Received 2,599 Likes
on
1,581 Posts
Agree, hoping for a 32V DOHC V8 to go with the DCT.
The following 2 users liked this post by BEAR-AvHistory:
nist7 (12-03-2020),
Steven Bell (12-03-2020)
#2859
Safety Car
Yup yup. C8 seems incredible. Let GM work out bugs/issues for couple years and IIRC, the C8 Grand Sport could be a sweet spot of more power than the base + all the handling bits for decent price. C7 GS was same power as C7 base I think right? So the C8 GS is what I'm really excited about honestly as super streetable that's not too crazy/overwhelming....and hopefully no more heat soak issues....
The following users liked this post:
Steven Bell (12-03-2020)
#2860
Ex-OEM King
Guys....this Corvette is over 7 years old now with 42,000 miles on it. Just like my Type S, I've modified this for that long a period of time. Here are the last Carbon Fiber mods for it.....I literally can't think of anything else to do.
First, there were chrome trim pieces around the dash (where the Driver Information Center is). Today I replaced those chrome pieces with Carbon Fiber.
Next, just a small aesthetic idea....I trimmed the air intake in red on the full Carbon Fiber grill.
There is also a Carbon Fiber "extension" on the lower rear of the Corvette. I've trimmed that as well.
At this point, I'm lost and cannot think of anything else to make in Carbon Fiber.......this makes me very sad.
First, there were chrome trim pieces around the dash (where the Driver Information Center is). Today I replaced those chrome pieces with Carbon Fiber.
Next, just a small aesthetic idea....I trimmed the air intake in red on the full Carbon Fiber grill.
There is also a Carbon Fiber "extension" on the lower rear of the Corvette. I've trimmed that as well.
At this point, I'm lost and cannot think of anything else to make in Carbon Fiber.......this makes me very sad.
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
#2861
Team Owner
Thread Starter
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
^^^ Yes sir, Sam....performance mods are a ported throttle body, Halltech Cold Air Intake and Corsa Extreme Exhaust, but no supercharger.
#2862
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
You're probably leaving some power on the table with just bolt ons and no engine tweaks...
have you considered GT tuners and a local knowledgeable guy? I bet you'd feel it in the seat.
OR, tell your financial planner that you're only planning to live to 100 and not 120...that should free
up some of that IRA cash for a whipple on top.
That'll make Z06 guys jealous for sure.
have you considered GT tuners and a local knowledgeable guy? I bet you'd feel it in the seat.
OR, tell your financial planner that you're only planning to live to 100 and not 120...that should free
up some of that IRA cash for a whipple on top.
![Wish](https://acurazine.com/forums/images/smilies/wish.gif)
That'll make Z06 guys jealous for sure.
#2863
Team Owner
Thread Starter
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
^^^ As a matter of fact I have the name of a local tuner whom I will be visiting in Spring 2021 !!!
The following users liked this post:
Steven Bell (12-20-2020)
The following users liked this post:
Steven Bell (12-20-2020)
#2866
Ex-OEM King
Force feed that V8!
The following users liked this post:
Steven Bell (12-20-2020)
#2867
Moderator
Twincharge!
![Genius](https://acurazine.com/forums/images/smilies/genius.gif)
The following users liked this post:
Steven Bell (12-20-2020)
#2868
Drifting
Hello Steven, do you have an Engine Bay Pic with the Haltech CAI Intake ? Any fitment issues ?
With the Intake and Ported Throttle body you should consider a Tune.
Have been considering an Intake as my next Mod.
With the Intake and Ported Throttle body you should consider a Tune.
Have been considering an Intake as my next Mod.
The following users liked this post:
Steven Bell (12-20-2020)
#2869
Team Owner
Thread Starter
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
^^^ YES! Here you go....no fitment issues at all. I'll be doing a tune in the Spring of 2021.
![](https://cimg4.ibsrv.net/gimg/acurazine.com-vbulletin/2000x1504/78c75f57_9034_4230_b98c_8ed158262660_c1f737de4ef704483306f71b379ffc3b591692b0.jpeg)
![](https://cimg5.ibsrv.net/gimg/acurazine.com-vbulletin/2000x1504/a7bde3bf_9cbc_419d_a93e_53e78e9afc9b_1_201_a_edc67c8a118b47faa23c8f0acd82e047bda6d54e.jpeg)
![](https://cimg7.ibsrv.net/gimg/acurazine.com-vbulletin/1500x2000/cd8865c0_e4fb_45d4_9e68_a5114382906f_1_201_a_e6ad1f79b177da3bc7f68fb3a64b7568251937b2.jpeg)
The following users liked this post:
00TL-P3.2 (12-21-2020)
#2870
Team Owner
Thread Starter
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Got the targa and halo wrapped at Cornerstone Window Tinting in Kansas City. They also replaced my Xpel on the nose of the Stingray!
They did an outstanding job and it looks OEM. These wraps have come a LONG way.
They did an outstanding job and it looks OEM. These wraps have come a LONG way.
![](https://cimg6.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1504/0e65615b_9f1e_4709_bf08_4d9ca5c417a1_9bf28509801bcc432c99419e73556ed2fd352a43.jpeg)
![](https://cimg9.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1504/c5dde00e_8797_4715_b8a0_574b4b2e0848_7013d38f3d86affc528bf9f289f101f029fff62e.jpeg)
![](https://cimg1.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1504/8ecc5088_3c54_4263_87c7_05b3da208122_ca1de26f80969b308b415e29f8e7f67c47b3e7c1.jpeg)
![](https://cimg2.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1504/f7f1d7d4_58b8_45b0_82f9_544a3871525e_9e7b2abcbb695e88d6e94e1e64714146ba4f131c.jpeg)
![](https://cimg4.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1504/c457189f_3b7a_4f42_888e_f048ecbbf7a5_5f730ef9f03cd343423bf2d36fb160b25dd622b0.jpeg)
![](https://cimg5.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1504/959ce2d7_8050_4fe6_835c_70f1ef9a8e07_43f78b0084eda4d87714f8624e724e1d47ae3de3.jpeg)
![](https://cimg7.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1504/2f95bb89_0950_4045_8e9d_303c660b8961_4a66d141bbaa01b9e7157ff80734fdaf75926218.jpeg)
The following 3 users liked this post by Steven Bell:
#2871
Moderator
![Run](https://acurazine.com/forums/images/smilies/run.gif)
![Run](https://acurazine.com/forums/images/smilies/run.gif)
Kidding aside, that looks great!
The following users liked this post:
Steven Bell (12-21-2020)
#2872
In the Mid-South meow
iTrader: (2)
Looks soooooo nice!
The following users liked this post:
Steven Bell (12-21-2020)
#2873
Team Owner
Thread Starter
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
^^^^ Thanks!
#2874
Moderator
iTrader: (3)
Looks great, Steven!
![Cheers](https://acurazine.com/forums/images/smilies/cheers.gif)
The following users liked this post:
Steven Bell (01-14-2021)
The following users liked this post:
Steven Bell (01-14-2021)
#2876
Team Owner
Thread Starter
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Thanks guys! I was really happy with the final product, for sure!
#2878
Suzuka Master
Do you know what film they used for the wrap? It looks really good
#2879
Team Owner
Thread Starter
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
^^^ Unfortunately I don't....I could find out, if you would like me to.
#2880
Suzuka Master
Dont worry about it. I was just curious
Wraps have come a long way in the last decade. Especially carbon fiber style ones
Wraps have come a long way in the last decade. Especially carbon fiber style ones