Numairh's DGP 6MT TL
The following 3 users liked this post by numairh:
The following users liked this post:
numairh (01-01-2020)
The following users liked this post:
numairh (01-01-2020)
The following users liked this post:
numairh (01-01-2020)
The following users liked this post:
Midnight Mystery (01-01-2020)
#287
UA6MT
Thread Starter
iTrader: (2)
So content with my build
Drove with my windows down for the first time in a while and heard clicking on take off and stopping. Remembered my old TL had the same issue and did more research and it pointed to worn axle nuts. When I changed my axles, I reused the nuts and just did some ugga duggas with an impact. Got new nuts and torqued them to spec and the clicking went away. Yay for easy fixes! Happy New Years!
Drove with my windows down for the first time in a while and heard clicking on take off and stopping. Remembered my old TL had the same issue and did more research and it pointed to worn axle nuts. When I changed my axles, I reused the nuts and just did some ugga duggas with an impact. Got new nuts and torqued them to spec and the clicking went away. Yay for easy fixes! Happy New Years!
The following 4 users liked this post by numairh:
#288
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
Simple fixes are the best.
Shit, you just got me thinking I need to check the torque on the Odyssey...one side definitely makes a clicking noise...almost like a thunk thunk thunk under certain conditions.
I did the axles a few months back and I bet they should have been replaced too.
Shit, you just got me thinking I need to check the torque on the Odyssey...one side definitely makes a clicking noise...almost like a thunk thunk thunk under certain conditions.
I did the axles a few months back and I bet they should have been replaced too.
#289
Safety Car
iTrader: (8)
Simple fixes are the best.
Shit, you just got me thinking I need to check the torque on the Odyssey...one side definitely makes a clicking noise...almost like a thunk thunk thunk under certain conditions.
I did the axles a few months back and I bet they should have been replaced too.
Shit, you just got me thinking I need to check the torque on the Odyssey...one side definitely makes a clicking noise...almost like a thunk thunk thunk under certain conditions.
I did the axles a few months back and I bet they should have been replaced too.
The following 3 users liked this post by numairh:
The following users liked this post:
Midnight Mystery (01-07-2020)
#294
UA6MT
Thread Starter
iTrader: (2)
Update: Had the red stripes for almost a year now and got the itch to do something different. Ossman14 sourced a clean set of 07-08 taillights and got the pinkish-red chrome bezel and the lenses painted with candy red tint to darken them up. Exactly the look I was going for! Now the clear brake light lens matches other parts on the car like the wheels and the red isn't so bright.
Car is also going in for a laundry list of maintenance. Not all items are pictured but the TL will be getting a new Luk clutch kit, Oem release bearing, Aasco lightweight flywheel, Oem slave with the check valve removed, Exedy em2 spec clutch master which also deletes a check valve, Oem engine and trans mounts, front and rear crank seals, oil pump seal, ac compressor, timing belt, and valve adjustment. She'll be running great for another 15 years!
Car is also going in for a laundry list of maintenance. Not all items are pictured but the TL will be getting a new Luk clutch kit, Oem release bearing, Aasco lightweight flywheel, Oem slave with the check valve removed, Exedy em2 spec clutch master which also deletes a check valve, Oem engine and trans mounts, front and rear crank seals, oil pump seal, ac compressor, timing belt, and valve adjustment. She'll be running great for another 15 years!
The following 2 users liked this post by numairh:
Midnight Mystery (01-26-2020),
teh CL (01-27-2020)
The following users liked this post:
numairh (01-27-2020)
The following users liked this post:
numairh (01-27-2020)
#297
UA6MT
Thread Starter
iTrader: (2)
The following users liked this post:
Midnight Mystery (01-28-2020)
#298
UA6MT
Thread Starter
iTrader: (2)
Check valve removed from the new slave. Shoutout to Jimmyfu for the help.
Another pic of the rear with the new tails. I love how they're not super dark but not as bright and pinkish as they were before tinting the internals
Another pic of the rear with the new tails. I love how they're not super dark but not as bright and pinkish as they were before tinting the internals
The following 2 users liked this post by numairh:
Midnight Mystery (01-28-2020),
teh CL (01-28-2020)
#301
UA6MT
Thread Starter
iTrader: (2)
Last edited by numairh; 01-28-2020 at 10:24 AM.
The following users liked this post:
Midnight Mystery (01-28-2020)
#303
UA6MT
Thread Starter
iTrader: (2)
Car is back and feels amazing and so smooth! On top of all the parts I listed earlier, I also got the XLR8 engine torque damper, SS braided clutch line, front swayer bushings, and a new oil pump.
The following 3 users liked this post by numairh:
The following users liked this post:
numairh (02-26-2020)
The following users liked this post:
Shadow2056 (03-02-2020)
The following 4 users liked this post by numairh:
The following 5 users liked this post by numairh:
Drei (03-12-2020),
Midnight Mystery (03-03-2020),
Shadow2056 (03-03-2020),
sockr1 (03-03-2020),
teh CL (03-03-2020)
The following users liked this post:
numairh (03-03-2020)
#313
UA6MT
Thread Starter
iTrader: (2)
I’ve heard great things about Akebono!
Thank you! Haha, I should’ve specified.
Thank you. Honestly they’re way better stock projectors that have the original lens. But OEM projectors with ZKWR lenses (tuned properly) are a bit better than these. The Depo come with clear lenses so you get a pretty nice cutoff.
The following users liked this post:
Shadow2056 (03-03-2020)
The following users liked this post:
Shadow2056 (03-03-2020)
#315
UA6MT
Thread Starter
iTrader: (2)
Took the HIC roof spoiler off because I wanted a smaller one, but then fell in love with how it looked without one. Also, back to red stripes but the internals were tinted with real clear coat this time and not vht.
The following 2 users liked this post by numairh:
Midnight Mystery (03-12-2020),
rockstar143 (03-11-2020)
The following users liked this post:
Midnight Mystery (03-22-2020)
#319
UA6MT
Thread Starter
iTrader: (2)
I don't know why I was being so indecisive. So I sold my HIC roof spoiler then missed it. Bought another one and then thought it just looked so rice and massive so I took it off 2 days later and sold it again LOL. I think it total between both of my TLs, I bought 4 or 5 HIC roof spoilers and sold them every time. I finally learned my lesson and won't be purchasing it again. Also, I finally convinced myself (along with the help of Dave) to get a Raceseng Slammer. Got the brushed finish with the engraving and the shift boot collar. I absolutely love it! First the Leatherique and now this... I need to stop talking to Dave
The following users liked this post:
Midnight Mystery (03-22-2020)