Numairh's DGP 6MT TL
Well, just picked up an '05 6MT from my work! 100k miles, no accidents, and major services already done. Got it for a steal. It is time to get rid of the SSM soon. I am swapping parts over then will list her for sale!
https://cimg2.ibsrv.net/gimg/acurazi...91b8e08f70.pnghttps://cimg3.ibsrv.net/gimg/acurazi...0f38441692.png |
Looks clean. Is it green?
|
Your other car was an 05 6MT. Why change after all the work you put into it? Just curious. |
Originally Posted by teh CL
(Post 16194944)
Looks clean. Is it green?
Originally Posted by Joecop67
(Post 16194984)
Your other car was an 05 6MT. Why change after all the work you put into it? Just curious. |
I have been a little busy haha. Here is how she sits about 3-4 days later. So far, I swapped the headlights, side markers, coilovers, wheels, and short shifter. I also washed, clayed, and waxed it. Need to do a paint correction soon but she looks pretty good as is.
https://cimg7.ibsrv.net/gimg/acurazi...67d6e8c2bd.png https://cimg6.ibsrv.net/gimg/acurazi...98abef3209.png |
:drool:
|
I've been super busy this week. I wrapped the orange wood trim in black wood grain vinyl, I swapped over my short shifter from the old TL, I put a light tint on my taillights from Laminx, replaced all halogens in the interior, license plate lights, and reverse lights with LEDs from EndlessRPM (SUPER bright), and my friend/lead of CleanCulture Norcal bannered up my new TL with a Henny copper banner.
https://cimg6.ibsrv.net/gimg/acurazi...600d7a2c9f.png https://cimg8.ibsrv.net/gimg/acurazi...3d215e5672.png https://cimg0.ibsrv.net/gimg/acurazi...12a3ce8b7d.png https://cimg1.ibsrv.net/gimg/acurazi...2bef474d7d.png https://cimg9.ibsrv.net/gimg/acurazi...1bc8574faf.png https://cimg7.ibsrv.net/gimg/acurazi...6ba73e422c.png https://cimg2.ibsrv.net/gimg/acurazi...7937e34b1e.png |
I'm really digging that wood grain wrap. How much disassembly was required for the center console?
|
Dude, congrats....what a rare color!
|
Where did you find the black woodgrain vinyl?
|
Originally Posted by ACURAte_tiTLe
(Post 16199108)
I'm really digging that wood grain wrap. How much disassembly was required for the center console?
Originally Posted by teh CL
(Post 16201892)
Where did you find the black woodgrain vinyl?
Originally Posted by Steven Bell
(Post 16200165)
Dude, congrats....what a rare color!
|
Brooo...
I had that mishimoto shift knob in both my S2000 and TL although eventually I went OEM S2000 titanium one, even though it's pricey! Loving this car coming together! |
Originally Posted by rockstar143
(Post 16202338)
Brooo...
I had that mishimoto shift knob in both my S2000 and TL although eventually I went OEM S2000 titanium one, even though it's pricey! Loving this car coming together! |
:pervert:
I liked it's weight and height but in the end, I loved the OEM feel too. |
Originally Posted by rockstar143
(Post 16202789)
:pervert:
I liked it's weight and height but in the end, I loved the OEM feel too. |
Loving it man! I'm not a fan of this color but you make it look good. Lol.
|
I know you have updated pix to show... lol kinda surprised its not posted yet.
|
Originally Posted by Shadow2056
(Post 16207749)
Loving it man! I'm not a fan of this color but you make it look good. Lol.
Originally Posted by stkh22
(Post 16209619)
I know you have updated pix to show... lol kinda surprised its not posted yet.
|
Maybe.. I keep tellin myself I will but, I forget and I get lazy or side tracked. BTW... CHANGE YOUR AVATAR!!!
|
Originally Posted by stkh22
(Post 16210244)
Maybe.. I keep tellin myself I will but, I forget and I get lazy or side tracked. BTW... CHANGE YOUR AVATAR!!!
|
Clean Green Fightin Machine! Wood grain wrap looks awesome
|
Moar pics of that woodgrain wrap...
|
Did a lot since my last update. I sold my Type S lips and bought an OEM Type S rear bumper, base front Aspec, and am picking up Type S side skirts in a couple days. If you can't tell, I am not doing full Aspec on this car. I had it for 3 years and its too played out now. I got my ATLP catback, RV6 Jpipe, K&N cold air intake, Progress RSB on the DGP from my old one as well. Swapped to 08 base tails but might go Type-S. I also went back to amber front LED turn signals and got some 6000K HID bulbs to replace the factory ones. Last, I removed the rear emblems, the mudguards, and I installed a rear diffuser. She will be going into paint this weekend to color match all the new parts!
https://cimg9.ibsrv.net/gimg/acurazi...5cc43e3a49.png https://cimg1.ibsrv.net/gimg/acurazi...d3dce69e44.png https://cimg0.ibsrv.net/gimg/acurazi...f0ffa545d6.png |
Super clean! I like it.
|
Looks great man!
The A-Spec kit is nice but I wasn't going to go for it either. Can't wait til it's out of the shop man. With all the parts color matched, I'm sure it'll look great! |
Liking the updates! Altho, why go with base a-spec front lip? Why not ‘08 front bumper also, an no lip? To match the updated rear.... in for pics! This color is rare! :thumbsup: |
Because the base aspec is classier and cleaner looking IMO.
|
Originally Posted by BreezyTL
(Post 16212252)
Super clean! I like it.
Originally Posted by Shadow2056
(Post 16212253)
Looks great man!
The A-Spec kit is nice but I wasn't going to go for it either. Can't wait til it's out of the shop man. With all the parts color matched, I'm sure it'll look great!
Originally Posted by Slpr04UA6
(Post 16212334)
Liking the updates! Altho, why go with base a-spec front lip? Why not ‘08 front bumper also, an no lip? To match the updated rear.... in for pics! This color is rare! :thumbsup:
Originally Posted by rockstar143
(Post 16214058)
Because the base aspec is classier and cleaner looking IMO.
|
Moar updates!!
So I sold my wheels on Monday, and ordered a set of ESR SR11 in black chrome which just came in. 18x9.5 +22 but I have to run a 3mm spacer in the front because the barely were touching the brakes :/. Waiting on tires to come in now. Went with 225/35/18 Achilles ATR Sport 2. Also got my Type S side skirts off my friend who just got Aspec. Bumpers, lip and skirts going into get painted this Saturday and hopefully wheels are on next week. I also did a 1 step paint correction because the swirls were really bothering me, and it looks so much better. Ill do a better correction a little bit later but this will do for now. https://cimg5.ibsrv.net/gimg/acurazi...7414ffcae0.png https://cimg7.ibsrv.net/gimg/acurazi...41e3be5729.png https://cimg6.ibsrv.net/gimg/acurazi...5102a065a4.png |
Those wheel are gonna look amazing man!
|
Looking great. No surprise from you. That wheel and finish are exactly what I want for my anthracite. Just what you wanted to hear, right? Lmao :thumbsup:
|
This is gonna be good.
|
That's what she said...
|
naww...it's not.
|
Got the wheels on! I love the fitment, but the car sits a little lower with the 35 series tire... Need to get used to it. Its rubs all around, so I shaved my rear fenders (scared to roll because I don't know if any repairs with bondo have been done) and it rubs a lot less now, can't even see the marks on the tire either.. 18x9.5 +22 with a 3mm up front to clear the calipers and 225/35 all around.
https://cimg7.ibsrv.net/gimg/acurazi...02880396f0.png https://cimg8.ibsrv.net/gimg/acurazi...b01b194a41.png |
The finish on those wheels is beautiful! Nice choice! |
Got my Type S decklid in real CF, and a little sneak peak of my front bumper.
https://cimg9.ibsrv.net/gimg/acurazi...5b1cb6a6db.png https://cimg0.ibsrv.net/gimg/acurazi...d2cbb28cc4.png https://cimg8.ibsrv.net/gimg/acurazi...151c658de7.png |
:woot:
|
Still looks broken ....
|
like a piece of your heart? :precious:
|
All times are GMT -5. The time now is 07:15 PM. |
© 2024 MH Sub I, LLC dba Internet Brands