It's now the "Official" Slammed Thread-3G TL's.
#1009
2014 Jeep SRT
#1013
Suzuka Master
iTrader: (1)
![](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/548952_348302055220087_106576446059317_1012479_1451167480_n.jpg)
#1014
2014 Jeep SRT
^LOL. This is the jack I'm getting as soon as I get back home. It's only 2-5/8" at its lowest point. I think that will fit under my car hehehe...
http://www.harborfreight.com/2-ton-l...ump-68050.html
http://www.harborfreight.com/2-ton-l...ump-68050.html
#1015
BANNED
iTrader: (33)
^thats the same one i have and it wont fit under mine. i still have to drive the front 2 wheels up on some 2x4's first.
#1016
2014 Jeep SRT
![](https://www.daniweb.com/images/attachments/0/FFFFUUUUUU.png)
#1017
BANNED
iTrader: (33)
^i might be lower than you tho. i dunno
#1018
2014 Jeep SRT
I'll assume you are hehe. Know of any floor jacks that will go even lower?
#1019
BANNED
iTrader: (33)
^i do not. i searched for a while and stayed with the one you posted.
it's close to fitting...but still won't.![Tomato](https://acurazine.com/forums/images/smilies/tomato.gif)
guess we weren't meant to drop our cars so drastically.
it's close to fitting...but still won't.
![Tomato](https://acurazine.com/forums/images/smilies/tomato.gif)
guess we weren't meant to drop our cars so drastically.
#1020
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
I am at the lowest point where my jack will JUST fit...I have the blue anodized racing jack...BUT, I have 19's, which I think helps me out a little bit. When I jack the front, i have to shove it past the air diffuser..and on the front side jack points, the jack slightly hits the sideskirt before lifting the car.
The following users liked this post:
JOSER408 (05-11-2012)
The following users liked this post:
JOSER408 (05-12-2012)
#1035
A6 and TL
iTrader: (2)
Join Date: Mar 2010
Location: New York/Brampton Canada/SoCal
Posts: 1,597
Received 145 Likes
on
123 Posts
![](http://img856.imageshack.us/img856/1529/004hgl.jpg)
![](http://img11.imageshack.us/img11/4346/466qv.jpg)
![](http://img600.imageshack.us/img600/4065/752w.jpg)
Ok so I just bought some HT Spec Type 1 coilovers. It was a impulse buy and I don't know much about coils. I am super excited about installing them but first I need proper size rear tires.
![Yuck](https://acurazine.com/forums/images/smilies/yuck.gif)
I have type s wheels and I want my car to be low as that members car is....I am wondering what kind of spacers would I need when being that low? Should I get a rear camber kit if I am that low....., and how do you "adjust" height on coils...no idea I am a newb.
Thanks
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#1036
HE>i
iTrader: (1)
Spacers are not required but recommended so you don't have the "sunk in" look (HellaSunk lol)
I had 15/20mm front & rear, while natural camber may be enough, you might have to roll your fenders all around.
Alot of members are not running camber kits, but I would recommend the Ingall's rear just so you have adjustments to camber and toe. being that low, you may not want all the natural camber that comes with lowering.
The rear camber arms are easy to install/adjust and fairly cheap, so why not? And when i aligned my car I had -.5 camber front and -1.5 camber rear, which seemed to work for me because i rolled/pulled the fenders
Coils should come with height adjustmant instructions. Most, you just loosen the bottom locking nut and adjust larger top nut (the one that is sandwiched together with the smaller nut).
I do not have those coils so i cant say for sure. Good luck on install and YES, the car you posted has a sexy stance!
I had 15/20mm front & rear, while natural camber may be enough, you might have to roll your fenders all around.
Alot of members are not running camber kits, but I would recommend the Ingall's rear just so you have adjustments to camber and toe. being that low, you may not want all the natural camber that comes with lowering.
The rear camber arms are easy to install/adjust and fairly cheap, so why not? And when i aligned my car I had -.5 camber front and -1.5 camber rear, which seemed to work for me because i rolled/pulled the fenders
Coils should come with height adjustmant instructions. Most, you just loosen the bottom locking nut and adjust larger top nut (the one that is sandwiched together with the smaller nut).
I do not have those coils so i cant say for sure. Good luck on install and YES, the car you posted has a sexy stance!
#1037
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
for the HT's...the adjustment is to the entire shock assembly since the compressed spring stays the same. I had megans with a similar set up and never really understood how to do it (with my rsx, i too was a newb).
to be that low, start off with no spacers and natural camber...then see where you sit and do your rolling and add spacers as necessary. the only different advice I'd give to 05^ is to get the spc upper camber arm rather than the 2 lower ones. I hated them, the shop wasn't good with using them for aligning and I didn't like how it brought the bottom of the tire IN and not the top OUT...making it MORE sunken in.
I'd say that you can go low, roll, get camber close to oem spec and rock a 20mm rear spacer and 15 or 20 up front without a problem.
to be that low, start off with no spacers and natural camber...then see where you sit and do your rolling and add spacers as necessary. the only different advice I'd give to 05^ is to get the spc upper camber arm rather than the 2 lower ones. I hated them, the shop wasn't good with using them for aligning and I didn't like how it brought the bottom of the tire IN and not the top OUT...making it MORE sunken in.
I'd say that you can go low, roll, get camber close to oem spec and rock a 20mm rear spacer and 15 or 20 up front without a problem.
The following 2 users liked this post by k.r.e.a.m.:
06cmv6 (05-20-2012),
rockstar143 (05-20-2012)