RV6 V2 True Dual Exhaust for '04-'08 TL Type-S Quads Batch 2 Collecting deposits
#1921
It has come to our attention that this part was possibly mislabeled. The exhaust has been checked for correct fitment, however, if installed with the incorrect labels it will not fit properly. Please double check to make sure this part is labeled correctly. We are terribly sorry for any inconvenience this may have caused.
#1922
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
I don't mean to be a jerk, but honestly, it was nice to include the labeling, but if you piece this together under the car, that merged muffler will be pretty obvious that it can only lean to one side to fit under the heat shield.
Rich, trust me, the fact that you even bothered to try and have it labeled is still very appreciated. A cut above, I say.
Rich, trust me, the fact that you even bothered to try and have it labeled is still very appreciated. A cut above, I say.
#1924
Drifting
setup like a boss!
#1927
Race Director
iTrader: (3)
Join Date: Feb 2012
Location: South Florida
Age: 31
Posts: 18,278
Received 3,824 Likes
on
2,847 Posts
The following users liked this post:
rockstar143 (07-05-2013)
The following users liked this post:
rockstar143 (07-05-2013)
#1929
Suzuka Master
iTrader: (1)
I've heard it in person Rich
J's exhaust...
and I can't describe it, it's just perfect. Tone, deepness, loudness... amazing
J's exhaust...
and I can't describe it, it's just perfect. Tone, deepness, loudness... amazing
The following users liked this post:
rockstar143 (07-05-2013)
The following users liked this post:
sauceja (07-05-2013)
#1936
Suzuka Master
iTrader: (1)
You don't have to remove the bumper to install an exhaust I guess
The following users liked this post:
Pte. Jerry L. (07-18-2013)
#1938
BANNED
iTrader: (33)
#1939
Rich, I'm interested in the setup but not the tips in this batch. I saw a set of dark grey/charcoal tips earlier in this thread and was wondering if you'll be offering them in the near future. I'm ready to place an order.
Last edited by Hacura; 07-19-2013 at 12:38 AM.
#1941
Former Sponsor
Thread Starter
However for those that still want to go for the “black chrome” look we have found a safe do it yourself wand plating kit from Caswell. It will allow you to plate almost anything metal on your car using a wand. The best part is that if a spot wears or flakes off you can touch it up yourself with their kit.
http://www.caswellplating.com/plug-n...krome-kit.html
The following 2 users liked this post by Richie v6:
Hacura (07-22-2013),
justnspace (07-25-2013)
#1944
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
eager for the update
#1946
Race Director
iTrader: (1)
It shows them as being available on the website for a flat cost. So I assume he still has some.
God damn I've been close! I want to get HFPCs first. About to PM Quan about his.
I want the dual, I want the sound, I don't want a type-s rear aspec lip!
God damn I've been close! I want to get HFPCs first. About to PM Quan about his.
I want the dual, I want the sound, I don't want a type-s rear aspec lip!
The following users liked this post:
MEKO (07-25-2013)
#1954
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
man i would love to hear some PCD + v3 jpipe + TD exhaust....cant find any/many decent videos on youtube....
tons of vids with HFC's though (most by Jeremy and Morrissey)...I bet a ton of peeps bought the exhaust just listening to the 2 cars....
tons of vids with HFC's though (most by Jeremy and Morrissey)...I bet a ton of peeps bought the exhaust just listening to the 2 cars....
The following users liked this post:
Morrissey25 (08-08-2013)
The following users liked this post:
Morrissey25 (08-08-2013)
The following users liked this post:
JJH (08-08-2013)
#1959
Drifting
iTrader: (1)
And also, did you feel anything in terms of gains with the exhaust?
#1960
Former Sponsor
Thread Starter
We have one on the shelf.
You can get just the type-s bumper. I am picking mine up next week for $400 painted.
I have some ideas in the works however the tooling for square tips is very expensive. Especially for both sides.
I have a Precision 5858 and 6262 coming next week.
I have a Precision 5858 and 6262 coming next week.
The following 4 users liked this post by Richie v6: