Dropped/lowered/slammed 2G TSX - Pictures, Details, Reviews
The following users liked this post:
iSeeYouTwo (06-09-2013)
#82
Burning Brakes
Pictures - please at minimum provide a level, side view shot in good lighting showing the drop clearly
1. Have Tein Basics Coilovers
2. Drop is about 1.5-2 inches...not to sure
3. Have a Full Rear camber Kit (3-piece) and Adjustable in the front
4. Slight camber in the front... -.5 maybe a little more, and around -2 in the rear
5. Have all the fenders Rolled
6. Running 19x10.5 (All around) with 245/35
These coils are awesome, would recommend to anyone! Very comfortable, and my car with this and the Sway Bar from Progress handles like its on rails
1. Have Tein Basics Coilovers
2. Drop is about 1.5-2 inches...not to sure
3. Have a Full Rear camber Kit (3-piece) and Adjustable in the front
4. Slight camber in the front... -.5 maybe a little more, and around -2 in the rear
5. Have all the fenders Rolled
6. Running 19x10.5 (All around) with 245/35
These coils are awesome, would recommend to anyone! Very comfortable, and my car with this and the Sway Bar from Progress handles like its on rails
The following 2 users liked this post by VortexBlueTSX:
iSeeYouTwo (06-09-2013),
MNApecTSX (09-09-2014)
#83
Type of lowering set up - TEIN STREET FLEX
Estimated drop amount relative to stock. 1.5" lower than stock in both
WORK DD5.2
F +35 9J 235/35/19
R +30 10J 235/35/19 camber -2.3
Dunlop DZ101, noisy but really economic.
Estimated drop amount relative to stock. 1.5" lower than stock in both
WORK DD5.2
F +35 9J 235/35/19
R +30 10J 235/35/19 camber -2.3
Dunlop DZ101, noisy but really economic.
The following users liked this post:
iSeeYouTwo (06-09-2013)
#84
mr_tsxranjha
finally someone on the same tire size as im trying to get. quick question.. how is your ride?? im looking to put 225/30/20 also. any problems with damage to your fenders or touching? plz lmk thx
#88
Burning Brakes
Thread Starter
#89
09 tsx
http://instagram.com/p/a-Vt1ML6X6/
my 09 tsx 19x10 linea corse wheels 235/35/19 tein coilovers maxed out
my 09 tsx 19x10 linea corse wheels 235/35/19 tein coilovers maxed out
#90
Drifting
Join Date: Jun 2012
Location: City of Champs, MA
Age: 33
Posts: 2,969
Received 657 Likes
on
478 Posts
http://instagram.com/p/a-Vt1ML6X6/
my 09 tsx 19x10 linea corse wheels 235/35/19 tein coilovers maxed out
my 09 tsx 19x10 linea corse wheels 235/35/19 tein coilovers maxed out
Upload your image to a photo hosting website like www.imgur.com and post the [IMG][/IMG] code here.
The following users liked this post:
savclaude (07-11-2013)
#94
K-Sport Coilover,J-Power rear 6piece adjustable control arms,Rear Fender Roll,Front Coilover fully adjusted to the lowest setting (unknown " of drop) Rear can still go down some more (unknown " of drop), Front and Rear camber (unknown) Vossen Wheels VVS-CV4 20x10.5 +45/40 Front and Rear Tire size 255/30/20.
The following 2 users liked this post by chaqui74:
Puppetmaster (08-13-2013),
r000m101 (05-25-2014)
The following users liked this post:
htec (12-26-2014)
#96
09 TSX w/ tech pkg in Premium White pearl.
1. Have H&R sport lowering springs
2. Drop is about 1.25"
3. Camber adjustments Front left -0.3 Front right -0.7 Rear left -2.5, rear right -2.7 .
4. No fenders mods
5. Honda Factory Performance Wheels 19"
6. Hancook Ventus Evo V12 summer tires (245/40)
These springs have OEM quality ride and there is no rubbing. Would highly recommend.
1. Have H&R sport lowering springs
2. Drop is about 1.25"
3. Camber adjustments Front left -0.3 Front right -0.7 Rear left -2.5, rear right -2.7 .
4. No fenders mods
5. Honda Factory Performance Wheels 19"
6. Hancook Ventus Evo V12 summer tires (245/40)
These springs have OEM quality ride and there is no rubbing. Would highly recommend.
The following 4 users liked this post by Adam Rutledge:
#97
09 TSX w/ tech pkg in Premium White pearl.
1. Have H&R sport lowering springs
2. Drop is about 1.25"
3. Camber adjustments Front left -0.3 Front right -0.7 Rear left -2.5, rear right -2.7 .
4. No fenders mods
5. Honda Factory Performance Wheels 19"
6. Hancook Ventus Evo V12 summer tires (245/40)
These springs have OEM quality ride and there is no rubbing. Would highly recommend.
1. Have H&R sport lowering springs
2. Drop is about 1.25"
3. Camber adjustments Front left -0.3 Front right -0.7 Rear left -2.5, rear right -2.7 .
4. No fenders mods
5. Honda Factory Performance Wheels 19"
6. Hancook Ventus Evo V12 summer tires (245/40)
These springs have OEM quality ride and there is no rubbing. Would highly recommend.
#101
Burning Brakes
Thread Starter
Sorry deleted by accident...fixed!!
[img]http://farm4.staticflickr.com/3785/9...f92118a2_b.jpg[/img]
[img]http://farm4.staticflickr.com/3785/9...f92118a2_b.jpg[/img]
The following 2 users liked this post by Puppetmaster:
doh! (08-19-2013),
MC MiYoung3269 (08-19-2013)
#103
#104
I posted in the general section but thought I'd drop a few (phone) pics here.
2010 TSX on Megan EZ-Street Coilovers.
Wheels are XXR 527's 18x8.75 wrapped with 225/45/18 Kuhmo Ecsta SPT
I could continue slamming it but winter is around the corner.
2010 TSX on Megan EZ-Street Coilovers.
Wheels are XXR 527's 18x8.75 wrapped with 225/45/18 Kuhmo Ecsta SPT
I could continue slamming it but winter is around the corner.
#105
Burning Brakes
Thread Starter
I started this thread but never posted any pictures of my own car, so here's an old one. I would take some new pics but the car is dirty and winter is almost here, so the rims are coming off soon.
http://www.flickr.com/photos/7129234@N02/9715399903/
http://www.flickr.com/photos/7129234@N02/9715399903/
- Eibach Pro Kit springs with Koni Sports (Yellow)
- Estimated drop amount relative to stock: approx 1.5" lower than stock in front and 1.0" lower than stock in the rear. The Eibachs are a 1.0" drop all around but the Konis have two spring perch positions, and I'm using the lower up front and the normal perch for the rear, hence a 0.5" difference.
- Height from ground to fender: not measured
- No camber kit, front is around -0.8 and rear is around -3.0
- Rear fenders are rolled, passenger side was rubbing a lot because of the wheel and tire specs
- Rims are Volk CE28N in 18x8.5 +30 ET, tires are Conti ExtremeContact DW in 245/40/18
- Ongoing notes will be in this thread: https://acurazine.com/forums/2g-tsx-tires-wheels-suspension-300/notes-koni-eibach-diy-install-890160/
#108
1. Function and Form Type 1 coilovers (unknown of drop but it can go much lower)
2. no camber adjustments. Natural camber
3. all 4 fenders rolled. Rear bumper tabs cut and front fenders are slightly pulled
4. Wheels F: 19x9 +30 235/35R19 , R: 19x10 +30 245/35R19
I think I could of gone with 225/35R19 in the front to have the similar stretch as the rear. The fender still rubs in the front when I turn the wheel and go up the driveway. I'm going to go for airbag setup in the near future to avoid this issue.
2. no camber adjustments. Natural camber
3. all 4 fenders rolled. Rear bumper tabs cut and front fenders are slightly pulled
4. Wheels F: 19x9 +30 235/35R19 , R: 19x10 +30 245/35R19
I think I could of gone with 225/35R19 in the front to have the similar stretch as the rear. The fender still rubs in the front when I turn the wheel and go up the driveway. I'm going to go for airbag setup in the near future to avoid this issue.
The following users liked this post:
MC MiYoung3269 (12-16-2013)
#109
Everyday I'm rofling
1. Function and Form Type 1 coilovers (unknown of drop but it can go much lower)
2. no camber adjustments. Natural camber
3. all 4 fenders rolled. Rear bumper tabs cut and front fenders are slightly pulled
4. Wheels F: 19x9 +30 235/35R19 , R: 19x10 +30 245/35R19
I think I could of gone with 225/35R19 in the front to have the similar stretch as the rear. The fender still rubs in the front when I turn the wheel and go up the driveway. I'm going to go for airbag setup in the near future to avoid this issue.
2. no camber adjustments. Natural camber
3. all 4 fenders rolled. Rear bumper tabs cut and front fenders are slightly pulled
4. Wheels F: 19x9 +30 235/35R19 , R: 19x10 +30 245/35R19
I think I could of gone with 225/35R19 in the front to have the similar stretch as the rear. The fender still rubs in the front when I turn the wheel and go up the driveway. I'm going to go for airbag setup in the near future to avoid this issue.
#111
1. Function and Form Type 1 coilovers (unknown of drop but it can go much lower)
2. no camber adjustments. Natural camber
3. all 4 fenders rolled. Rear bumper tabs cut and front fenders are slightly pulled
4. Wheels F: 19x9 +30 235/35R19 , R: 19x10 +30 245/35R19
I think I could of gone with 225/35R19 in the front to have the similar stretch as the rear. The fender still rubs in the front when I turn the wheel and go up the driveway. I'm going to go for airbag setup in the near future to avoid this issue.
2. no camber adjustments. Natural camber
3. all 4 fenders rolled. Rear bumper tabs cut and front fenders are slightly pulled
4. Wheels F: 19x9 +30 235/35R19 , R: 19x10 +30 245/35R19
I think I could of gone with 225/35R19 in the front to have the similar stretch as the rear. The fender still rubs in the front when I turn the wheel and go up the driveway. I'm going to go for airbag setup in the near future to avoid this issue.
Man... I wanted to get these wheels for my TL-S. It got totaled like 4 days before Christmas But... now, I've got a sexy TSX with a MT. It' light blue though... not my first choice, but it is growing on me. One question... I asking a few vendors about those Gnosis wheels and they said like a 2 month wait. Did you have a long wait? Any suggested vendor? Thanks in advance!
#112
Man... I wanted to get these wheels for my TL-S. It got totaled like 4 days before Christmas But... now, I've got a sexy TSX with a MT. It' light blue though... not my first choice, but it is growing on me. One question... I asking a few vendors about those Gnosis wheels and they said like a 2 month wait. Did you have a long wait? Any suggested vendor? Thanks in advance!
I only trust certain people with my hard earned money and Speed Alliance is once of them. Let me know if you have any questions
#114
Wheels were for sale but decided to use them instead.
-AME WX
-19x9 all around +40f +30r
-225-35f 235-35r
-rear quarters shaved off
-rear spc camber kit
Mild drop, just barely tucking top of the tire, but planning to go on air soon.
-AME WX
-19x9 all around +40f +30r
-225-35f 235-35r
-rear quarters shaved off
-rear spc camber kit
Mild drop, just barely tucking top of the tire, but planning to go on air soon.
The following users liked this post:
iSeeYouTwo (02-05-2014)
#115
im baaaack!!
Tein basics
a 1/4" from lowest setting front and back
Vossens 20x9 +35 front 20x10.5 rear +45
225/35/20 front 255/30/20 rear
No camber kit
Rolled and slightly pulled only cause i bought the roller!
Havent really contributed to the site in a while. thought this would be helpful to somebody.
a 1/4" from lowest setting front and back
Vossens 20x9 +35 front 20x10.5 rear +45
225/35/20 front 255/30/20 rear
No camber kit
Rolled and slightly pulled only cause i bought the roller!
Havent really contributed to the site in a while. thought this would be helpful to somebody.
Last edited by T-jay; 02-03-2014 at 01:28 PM.
The following users liked this post:
iSeeYouTwo (02-05-2014)
#116
I'll help him out a bit:
- See above.
- D2 Coilovers
- I'll let him answer this.
- Same as #3.
- SPC Front & Rear Camber Kit. Front Camber: 0 Rear Camber: -.8
- Fenders Rolled.
- Tire size unknown, but wheels are Stance Demeanor 19x8.5 +35 Front, 19x9.5 +35 Rear.
- See #3.
#118
#120
The following users liked this post:
iSeeYouTwo (05-05-2014)