Julius' Airrunner for 2009-2014 Acura TSX
#161
Burning Brakes
Thread Starter
Getting close to able to mount these bad boys but need to install all other suspension parts. Had the wheels coated over at Mr. Detail in Seattle, Ballard, WA to be exact. Hit up Mike with all your detailing needs. Mr. Detail Seattle - The Best Car Wash & Auto Detail
#163
Burning Brakes
Thread Starter
Thanks and no those are not my CEs. Another customer dropped off their wheels to get coated when I picked up the wheels.
#164
Burning Brakes
Thread Starter
Been reading about Honda OEM TPMS with SSR wheels and how it is not compatible so I had to find out myself and OEM TPMS does fit with SSR CV04.
Here is Honda OEM TPMS into SSR CV04. Its a bit short so I ordered SSR valve stem extension (see photo below)
Here is with SSR valve stem extension:
Does any one know if the Honda OEM TPMS needs to be flush with the barrel or can it be free floating but held tight to the barrel with the Honda OEM TPMS locking nut like here:
Here is Honda OEM TPMS into SSR CV04. Its a bit short so I ordered SSR valve stem extension (see photo below)
Here is with SSR valve stem extension:
Does any one know if the Honda OEM TPMS needs to be flush with the barrel or can it be free floating but held tight to the barrel with the Honda OEM TPMS locking nut like here:
#165
VTEC just kicked in, yo!
Does not need to be flush. Mine are strapped to the barrel itself, very far away from the actual valve stem. Your usage of the SSR extension is probably the most ideal option for your situation.
The following users liked this post:
julius071 (03-12-2018)
#166
Burning Brakes
Thread Starter
Thanks for the feedback! Want everything to be prepared before I bring the wheels and tires down to the shop to get mounted and balanced.
The following users liked this post:
xtcnrice (03-14-2018)
#167
Burning Brakes
Thread Starter
Special Edition Headliner Conversion
This is a long time coming, special edition black headliner conversion. Spent about a fraction (including installation which involves removing the rear windshield) if everything was bought from factory.
The following users liked this post:
xtcnrice (03-31-2018)
The following users liked this post:
julius071 (06-04-2018)
#170
Burning Brakes
Thread Starter
#171
10th Gear
You'll see soon hopefully!
Question, the service manual for removing the headliner says you can disassemble the front cabin area and have enough clearance to remove the headliner through the front doors, assembly the same way. Who did you go to for removing the rear glass?
Question, the service manual for removing the headliner says you can disassemble the front cabin area and have enough clearance to remove the headliner through the front doors, assembly the same way. Who did you go to for removing the rear glass?
#172
Burning Brakes
Thread Starter
I had Durham Upholstery https://www.durhamuph.com/ do the conversion and they had their "glass guy" remove the rear glass.
#173
Burning Brakes
Thread Starter
Is it time to install the t-demand parts and maybe mount the wheels?! Vlog included!
#174
Burning Brakes
Thread Starter
Video is now live!
#175
Burning Brakes
Thread Starter
Uploaded a new video on how the car sits!
#176
Burning Brakes
Thread Starter
After a very long time, finally test fitted the wheels!
The following users liked this post:
julius071 (10-07-2020)
#180
Burning Brakes
Thread Starter
#181
Burning Brakes
Thread Starter
Installed new battery for the TSX and mounted tires on the wheels!
Thread
Thread Starter
Forum
Replies
Last Post
Crazytree
1G TSX (2004-2008)
75
01-06-2004 10:33 AM