2012 Bellanova White P. Tsx Tech Build Thread
#201
Pro
Thread Starter
It would be hideous Stock rear blc its too high. Only way i could imagine it
Bying a set of Front Springs and Seperate rear but not sure if they do that. Then it would be mis matching companies to achieve the down angle you want.
Not clever imho.
Thanks Bro!
#202
Pro
Thread Starter
If i dont want to tackle the RSB we'll link up again and get it Done.
By The WayJake (StreekKa) did the DIY spring Install, as well as does other side work.
Very cool fella, sat there and bullshitting for hours. Recommended!
Thanks Again!
By The WayJake (StreekKa) did the DIY spring Install, as well as does other side work.
Very cool fella, sat there and bullshitting for hours. Recommended!
Thanks Again!
#205
Pro
Thread Starter
Ive seen pics of them uploaded by friends on FB. Look pretty sick.
Mine should be here in 3-5 days. Ordered them online. I cant do that camping dude lol
Im not to crazy about the Galaxys. Ill for sure be buying a pair. But im not 100% sure ill keep it. May just use it to flip
#206
ROTAREDOM
dude... stop posting pictures and making me jealous!
#208
Pro
Thread Starter
Sorry Bro Motivationnn slammmmm your ishhhhhh
Thanks Sir. Appreciate it
Will try and post more pics of drop tonight, To give any person interested in Stechs exact drop. Rear Shots today hopefully
Will try and post more pics of drop tonight, To give any person interested in Stechs exact drop. Rear Shots today hopefully
#209
Pro
Thread Starter
A few More pics of the Drop for anyone considering Tein S Techs
I heard a Scrape and noticed these little flappers. So every time i hear a scrap its them!
Look What came in the Mail, My 4500k DDM Foggies.
Ill be At Menlo tomorrow so those who go can see the drop for themselves. Theres no gap. The tires actually go slightly under. If you stick your finger you have to angle up. MOAARLOW?
I heard a Scrape and noticed these little flappers. So every time i hear a scrap its them!
Look What came in the Mail, My 4500k DDM Foggies.
Ill be At Menlo tomorrow so those who go can see the drop for themselves. Theres no gap. The tires actually go slightly under. If you stick your finger you have to angle up. MOAARLOW?
Last edited by MoaarLow; 02-06-2012 at 06:59 PM.
The following users liked this post:
denwhat (02-06-2012)
#210
ROTAREDOM
Dude noice! Now come to Florida!
#211
Pro
Thread Starter
#212
ROTAREDOM
Almost at 60,000 here... Im at 2.5 yrs. I put on close to 1,000 a month going to school and work :/
#213
Pro
Thread Starter
My Old Pictures just make it hard to move on
#215
Pro
Thread Starter
#216
ROTAREDOM
Get the new NSX! I shit my panties during the superbowl!
The following users liked this post:
ed_423 (02-07-2012)
#218
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
Go moarlowww lol :d
#220
Pro
Thread Starter
lol it isnt practical for me. And way out of my price range lol. If i want a NSX i need to get back into college NOW!
lol finally!!! i was getting sick of the monster truck look
I thought id want to go lower, but im actually very satisfied wl the height. Any lower and moving around NYC would be a pain in the ass. Wl my Subaru i had to get at the illest Angle to tackle any bump for drive way... And even wl all the trying a $400 CF lip got destoyed....
Go for it bro. Its a really cool and cheap mod
lol finally!!! i was getting sick of the monster truck look
I thought id want to go lower, but im actually very satisfied wl the height. Any lower and moving around NYC would be a pain in the ass. Wl my Subaru i had to get at the illest Angle to tackle any bump for drive way... And even wl all the trying a $400 CF lip got destoyed....
Go for it bro. Its a really cool and cheap mod
#221
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
^^^ makes a ton of sense....i wudnt drive my car in NYC....never....i drove from St Louis to NY (1000 miles) but parked my car in Jersey and took the bus/PATH over to NY....
The following users liked this post:
musty hustla (02-07-2012)
#222
Goodbye.
Haha yeah that rubberized sorta bargeboard down there has caused me panic twice since buying my car.... Always would think that the front bumper got destroyed only to find out everything was fine... but now I try not to park so forward anymore :p
#224
Pro
Thread Starter
I have no idea. Maybe to push Debris that we would roll over or go under the car? I have no clue but they're annoying and give most of us heart attacks when they touch the ground!
#225
Goodbye.
I'm pretty sure that bargeboard (not really a little flap since it spans the entire width between the tyres) has little to no beneficial aerodynamic properties for our cars due to it's shape.
I suspect it might be a way of directing the air under the car lower to reduce the noise that comes from there into the cabin.
All I know is that everytime I let someone else drive my car, they ALWAYS end up scraping that and it freaks everyone out!!
I suspect it might be a way of directing the air under the car lower to reduce the noise that comes from there into the cabin.
All I know is that everytime I let someone else drive my car, they ALWAYS end up scraping that and it freaks everyone out!!
#227
Burning Brakes
I'm pretty sure that bargeboard (not really a little flap since it spans the entire width between the tyres) has little to no beneficial aerodynamic properties for our cars due to it's shape.
I suspect it might be a way of directing the air under the car lower to reduce the noise that comes from there into the cabin.
All I know is that everytime I let someone else drive my car, they ALWAYS end up scraping that and it freaks everyone out!!
I suspect it might be a way of directing the air under the car lower to reduce the noise that comes from there into the cabin.
All I know is that everytime I let someone else drive my car, they ALWAYS end up scraping that and it freaks everyone out!!
#229
Pro
Thread Starter
I wont cut mine up i was just curious to what their purpose was.
Anyone whose installed HID fogs through the bottom bumper, Howd you mount the ballast?
I may try it today at work while im free.
Also, Does anyone have 3000k? If the white on white doesnt make me fall in love ive just made up my mind on going yellow if all else fails. If trade my 4500 for 3000
Anyone whose installed HID fogs through the bottom bumper, Howd you mount the ballast?
I may try it today at work while im free.
Also, Does anyone have 3000k? If the white on white doesnt make me fall in love ive just made up my mind on going yellow if all else fails. If trade my 4500 for 3000
#230
7# werC 2uoYeeS
iTrader: (1)
Why didn't you bring them to the meet to have Dave do it for you?
I think some people just left the ballast on the bottom of the thing. I'd try to zip tie it somewhere or use the 3m tape and zip tie together. I wouldn't worry too much about it while driving...I just don't want it sliding around.
I think some people just left the ballast on the bottom of the thing. I'd try to zip tie it somewhere or use the 3m tape and zip tie together. I wouldn't worry too much about it while driving...I just don't want it sliding around.
#231
Pro
Thread Starter
Why didn't you bring them to the meet to have Dave do it for you?
I think some people just left the ballast on the bottom of the thing. I'd try to zip tie it somewhere or use the 3m tape and zip tie together. I wouldn't worry too much about it while driving...I just don't want it sliding around.
I think some people just left the ballast on the bottom of the thing. I'd try to zip tie it somewhere or use the 3m tape and zip tie together. I wouldn't worry too much about it while driving...I just don't want it sliding around.
#232
ROTAREDOM
^ that's why I went with LED's... fogs don't do much as far as I am concerned since our HIDs are extremely bright. I just wanted the color without the hassle, so LED was the choice for me.
#233
theres a flap on either side under the car for foglight access. it'll be extremely hard for you to do now especially since you are lowered. you can also turn your wheel all the way in, and take off the screw and a clip or two and access the fog from the wheel well. or you can just wait till sunday since i have to take your bumper off either way if you want me to take the resonator out you bumfuck. plus its snowing right now(atleast in philly) and im COLD as balls
#234
Pro
Thread Starter
theres a flap on either side under the car for foglight access. it'll be extremely hard for you to do now especially since you are lowered. you can also turn your wheel all the way in, and take off the screw and a clip or two and access the fog from the wheel well. or you can just wait till sunday since i have to take your bumper off either way if you want me to take the resonator out you bumfuck. plus its snowing right now(atleast in philly) and im COLD as balls
i found some sick places and ways to mount the ballast.
My cousin wants to order fogs for her accord, Which are H11 and she wants 4500k. So if i dont like the look i have someone to unload the bulbs to.
#235
That would have been so simple
Thanks homo thug, I checked it out, it definitely would be hard to work in that space and mount the ballast somewhere decent and out of the way.
i found some sick places and ways to mount the ballast.
My cousin wants to order fogs for her accord, Which are H11 and she wants 4500k. So if i dont like the look i have someone to unload the bulbs to.
Thanks homo thug, I checked it out, it definitely would be hard to work in that space and mount the ballast somewhere decent and out of the way.
i found some sick places and ways to mount the ballast.
My cousin wants to order fogs for her accord, Which are H11 and she wants 4500k. So if i dont like the look i have someone to unload the bulbs to.
#236
Pro
Thread Starter
#237
Pro
Thread Starter
HIDS are finally installed. HUGEEE Thanks to the Bro Pyro for trooping it wl me. we had a few small roadblocks but we made it work!! Bulbs are DDM 4500k. They appear a little more blue in pictures, But they still have a blue tint. Which im a little upset about. Either that or they sent me the wrong bulbs.. Whatever!
I received the kit with the 2 small metal tabs. Which had to be inserted into the stock Fog light Plug. Its a very weird set up but it is what it is. Figuring that took a while. & Also my Bumper was being a slut and didnt wanna pop off, She put up a fight but eventually gave in to the tugging.
A DETAILED DIY will be made but im exhausted and have to be up for work early so heres a quick rundown of what we did.
Removed the clips on top of the grille cover/Plastic that runs along the very front.
Went to the fender wells and removed the screw from the Passanger and driver side
Under the car there are 10 Plastic clips that need to be removed.
Pry each side, and the pop off the midle, pretty simple once they start popping off
Wire up the fogs and just do the opposite for installation
BEFORE PICTURES
INSTALLATION
Make Sure the Bulb is Inserted with the right shape things. Whatever you call them. Look Closely for those who wouldnt do it and try to force it
DONE
HOME
I Hadda Take advantage of $3.60 93Octane in NJ vs $4.11 at the BP around my way!!
I received the kit with the 2 small metal tabs. Which had to be inserted into the stock Fog light Plug. Its a very weird set up but it is what it is. Figuring that took a while. & Also my Bumper was being a slut and didnt wanna pop off, She put up a fight but eventually gave in to the tugging.
A DETAILED DIY will be made but im exhausted and have to be up for work early so heres a quick rundown of what we did.
Removed the clips on top of the grille cover/Plastic that runs along the very front.
Went to the fender wells and removed the screw from the Passanger and driver side
Under the car there are 10 Plastic clips that need to be removed.
Pry each side, and the pop off the midle, pretty simple once they start popping off
Wire up the fogs and just do the opposite for installation
BEFORE PICTURES
INSTALLATION
Make Sure the Bulb is Inserted with the right shape things. Whatever you call them. Look Closely for those who wouldnt do it and try to force it
DONE
HOME
I Hadda Take advantage of $3.60 93Octane in NJ vs $4.11 at the BP around my way!!
#240
hahahaha the funniest part was that i texted you saying "how much you got left in the tank" and then told you to not fill up till jersey so you could save 50 cents a gallon, AND not pump your own gas. gotta love jersey!!
did i mention it was COLD AS BALLS TODAY? we nearly froze out there, and yes he got sent the fucked up bulbs/ballast, instead of mine. his are the same as the ones npathak used in his DIY, mine have a cap on the connection to the OEM connector.
to add before he puts the DIY on the bumper removal. there are 8 clips holding in the plastic part on top. you have to take that off. then there is a screw in each wheel well. underneath the car, in the middle there is a black liner that sticks about an inch under. behind there, there are 6 clips. on either side of that, there are 3 clips, so 6 more in total. take those off too. then pull the bumper off from the wheel wells. theres clips around the headlights, mine were fairly easy. you just really gotta tug it. it feels like it might break. pull it off from the grill area and pull hard but be careful. also remember, the fogs are still connected, so don't pull it far away from the car. to take off the fogs, theres a clip near the bottom, press down on it, and it'll release the connector from the bulb. then turn the bulb left and pull it out
did i mention it was COLD AS BALLS TODAY? we nearly froze out there, and yes he got sent the fucked up bulbs/ballast, instead of mine. his are the same as the ones npathak used in his DIY, mine have a cap on the connection to the OEM connector.
to add before he puts the DIY on the bumper removal. there are 8 clips holding in the plastic part on top. you have to take that off. then there is a screw in each wheel well. underneath the car, in the middle there is a black liner that sticks about an inch under. behind there, there are 6 clips. on either side of that, there are 3 clips, so 6 more in total. take those off too. then pull the bumper off from the wheel wells. theres clips around the headlights, mine were fairly easy. you just really gotta tug it. it feels like it might break. pull it off from the grill area and pull hard but be careful. also remember, the fogs are still connected, so don't pull it far away from the car. to take off the fogs, theres a clip near the bottom, press down on it, and it'll release the connector from the bulb. then turn the bulb left and pull it out
Last edited by PyroDave; 02-12-2012 at 08:57 PM.