Turbo build 2009 tsx k24z3
The following users liked this post:
UTAH TSX (01-01-2014)
#482
Burning Brakes
Thread Starter
#483
Racer
anymore info on the mufflers Utah? are they just XL Turbo Mufflers with single inlet dual outlet with tips put on them? starting to look at ways to build my own custom exhaust since there really is no support for CU2's yet...and im not speding $1200 on the kit from heeltoeauto.com either....
any details on size/type of mufflers and what size tips your running too would be highly appreciated!
![Run](https://acurazine.com/forums/images/smilies/run.gif)
The following users liked this post:
UTAH TSX (01-13-2014)
#484
Burning Brakes
Thread Starter
anymore info on the mufflers Utah? are they just XL Turbo Mufflers with single inlet dual outlet with tips put on them? starting to look at ways to build my own custom exhaust since there really is no support for CU2's yet...and im not speding $1200 on the kit from heeltoeauto.com either....
any details on size/type of mufflers and what size tips your running too would be highly appreciated!![Run](https://acurazine.com/forums/images/smilies/run.gif)
any details on size/type of mufflers and what size tips your running too would be highly appreciated!
![Run](https://acurazine.com/forums/images/smilies/run.gif)
The following users liked this post:
richyrich1988 (01-03-2014)
#485
Burning Brakes
Thread Starter
Turbo power
Had a little fun racing a new STI on the freeway today, I pulled away no problem not even close 3 time from 50 MPH to about 100 MPH let him get big jump the last two times)
The following users liked this post:
UTAH TSX (01-13-2014)
#488
Burning Brakes
Thread Starter
Videos
Crappy videos, got pulled over no ticket cop liked my car said it was really fast
The following 2 users liked this post by UTAH TSX:
iCrap (01-05-2014),
thunderbt3 (01-05-2014)
#489
TSX AMG Type //M i-VVT
Sounds really nice but maybe a bit too much droan.
Can you even get traction though or are you pretty much just spinning through everything? hard to tell from vid.
Can you even get traction though or are you pretty much just spinning through everything? hard to tell from vid.
The following users liked this post:
UTAH TSX (01-13-2014)
#490
Burning Brakes
Thread Starter
traction about half throttle in the videos in 1st and 2nd 3rd I can go full throttle
#491
Burning Brakes
Thread Starter
More exhaust drone elimination
Well I thaught I was done but still to much droan so I ordered some sound deadoner and another resonator f#@##!n spent like a grand on my exhaust now
The following users liked this post:
UTAH TSX (01-10-2014)
#493
Burning Brakes
Thread Starter
Sound proof
Installed sound proofing today, I still have a little more to put under the back seat and on the back and sides of trunk
#495
Burning Brakes
Thread Starter
#496
Burning Brakes
Thread Starter
New resonator
Installing a second resonator today to try and get rid of droan, will see how it worked on my way home.
#497
Racer
those 2 post in ground lifts must be so nice, we only have the single piston ones at my work ash they are such a pain in the ass sometimes. your car just gets better and better every time i see it. also, the area you live in is stunning.
The following users liked this post:
UTAH TSX (01-18-2014)
#498
Burning Brakes
The mountain backdrop was as impressive as the car.
The following users liked this post:
UTAH TSX (03-01-2014)
#499
Burning Brakes
Thread Starter
Ok after a few days of driving, I think I can live with the sound, I'm going to finish wrapping the rest of the exhaust resonators and all, that might drop the drone level a little more, this zero back pressure is a little tough to get quiet enough to live with.
So I'm done with my car for a while, I have several people ready to turbo there TSX's and I need to concentrate on that.
So I'm done with my car for a while, I have several people ready to turbo there TSX's and I need to concentrate on that.
Last edited by UTAH TSX; 01-22-2014 at 05:10 PM.
#500
Burning Brakes
Thread Starter
Well it's time to get busy been having fun with the car it loves the cold air half throttle and full boost is so fun.
Installed HID conversion kit in my fog lights and put led bulbs in my plate lights (the best 20 bucks I think I have ever spent what a difference on a white car it glows now LOL), been waiting on a friend at work to help me make a professional video his brother does it for a living, now it's off to fabrication on a couple of kits.
Installed HID conversion kit in my fog lights and put led bulbs in my plate lights (the best 20 bucks I think I have ever spent what a difference on a white car it glows now LOL), been waiting on a friend at work to help me make a professional video his brother does it for a living, now it's off to fabrication on a couple of kits.
#501
Ok after a few days of driving, I think I can live with the sound, I'm going to finish wrapping the rest of the exhaust resonators and all, that might drop the drone level a little more, this zero back pressure is a little tough to get quiet enough to live with.
So I'm done with my car for a while, I have several people ready to turbo there TSX's and I need to concentrate on that.
So I'm done with my car for a while, I have several people ready to turbo there TSX's and I need to concentrate on that.
![Agree](https://acurazine.com/forums/images/smilies/agree.gif)
![Agree](https://acurazine.com/forums/images/smilies/agree.gif)
![Agree](https://acurazine.com/forums/images/smilies/agree.gif)
![Agree](https://acurazine.com/forums/images/smilies/agree.gif)
![Agree](https://acurazine.com/forums/images/smilies/agree.gif)
![Agree](https://acurazine.com/forums/images/smilies/agree.gif)
![Agree](https://acurazine.com/forums/images/smilies/agree.gif)
The following users liked this post:
UTAH TSX (03-01-2014)
#502
Burning Brakes
I think the final part for the LSD swap has finally been purchased. I am hoping my mechanic can get my car in and up on the lift to get going. This winter has been brutal, and totally demotivating.
#503
Burning Brakes
Thread Starter
I think mrCHOW has turbo fever, it's awesome I cant wait to get in my car and drive even to just go to work
Optimus can't wait to see this get finished and see the thrill it will give you to
Optimus can't wait to see this get finished and see the thrill it will give you to
#504
Once you go boost.... You don't go back.
She's going into the shop next week for the exhaust to be done =P 3" from downpipe to apexi N1 tips
The following users liked this post:
UTAH TSX (03-01-2014)
#505
TSX AMG Type //M i-VVT
Now you just need to do the AWD swap like that one russian guy did. AWD + Turbo in the TSX would be amazing.
The following users liked this post:
UTAH TSX (03-01-2014)
#506
Burning Brakes
So, I believe I got the final piece needed for the LSD swap. I am trying to line up with my mechanic to get the LSD and turbo installed as quickly as possible.
This winter we have had has been long and brutal, I am ready for it to be over.
This winter we have had has been long and brutal, I am ready for it to be over.
The following users liked this post:
UTAH TSX (02-21-2014)
#507
Advanced
looks so clean!! I didnt have a roller and had to cut around this damn air tank. I also removed the clothe over wells and did under there. still have much more
The following users liked this post:
UTAH TSX (03-01-2014)
#508
Burning Brakes
Thread Starter
#509
Advanced
#510
Burning Brakes
Thread Starter
#511
ROTAREDOM
How does a catch can that can filter 88% of oil particles at 1 micron and 100% particles >1micron sound to you?!
The following users liked this post:
UTAH TSX (02-25-2014)
#512
Burning Brakes
Thread Starter
Awsome mine doesent really work at all I got tired of smelling the fumes so I plumed it back into the intake manifold and put another bottle on it so the oil wont driain back into the motor
The following users liked this post:
UTAH TSX (03-01-2014)
#515
Burning Brakes
Thread Starter
#516
TSX AMG Type //M i-VVT
Is there an estimate on how much a kit will cost?
#517
Burning Brakes
Thread Starter
By the time you get everything needed flashpro injectors fuel pump turbo kit boost controller tuning you will spend approximately 7,500 this is a high quality ball bearing turbo and tuning with VitViper Tuning no cheap junk here
#518
Burning Brakes
Yeah.
Like I had mentioned so long ago, people always talk, but when it comes to money always real tight with it.
Like I had mentioned so long ago, people always talk, but when it comes to money always real tight with it.
#520
Burning Brakes
Thread Starter
Originally Posted by streetthrowback
Hey that piece that bolts up to the head and the turbo did you fab that your you got it from somewhere if so where? I was google ing the k24z3 motor and came across your thread. Im doing a k24 swap in a lotus elise and I was thinking of that motor because I can get it really cheap and also with low miles
Oh also check out the 9th civic site same exact engine other than engine mount location
http://www.9thgencivic.com/forum/index.php lots of info there
the k24z3 and z7 are great motors very tough and love boost over 400 whp I recommend forged pistons and aftermarket rods
The following users liked this post:
streetthrowback (03-03-2014)