Richie v6

Overview
The swap module allows for the interfacing of a 6 speed manual transmission with a stock 5 speed automatic transmission computer from the TL, Odyssey and CL. This allows for automatic to manual conversions and for engine swaps.

Without the module the following feature will not work.
-VTEC
-Full rev limit
-Speedo
-Reverse lock out
-Reverse light
-Passing inspection due to CEL

The advantage over using the 03 CL 6 speed ECU.
-You keep your stock ECU.
-No need to change engine harness
-No need for expensive cam gears and sensors
-No need to tow your car to dealer to immobilizer programming
-No need to tear apart interior to change body harness
-Allow you to use TL and Accord 6 speed which are more plentiful and have less mileage.
-No CEL

Basically you can save lots of money using the harness and everything is simplified.

fsttyms1

Wish this was available 2.5 years ago


As for the 99 to 00-03 TL-P motor, Im not sure of the exact differences. The intake is the main difference, Stuff like the crank position sensor is the same.

tegkid

iTrader: (7)

this makes a 6 speed swap so much more reasonable for joe shmoe. keep up the good work and keep us updated.

DC3328

iTrader: (22)

this joe shmoe is very happy

great work Richie v6

manafourme

Do you have to remove the VSA?

abptltypes02

i think so but with the manual trans. depending on which 1 you go with its going to have LSD

phee

iTrader: (5)

perfect!. now ask specific questions that you have for us.
can a mod move this to the first post?

Leo Type-S

richie is the man! this is exciting news..

twistedwedge

this swap is looking more and more like me....good work man!

Jake 6MT

iTrader: (1)

So do 99 guys who want the module need to buy the ecu from the 00-03?

poisx7

iTrader: (1)

so is this actually official.
How many have had this installed with the type s ECU and 6 speed.
For how long ??
Is this module begin TESTED & TRUSTED = (No, power loss in comparable to true 6 speed)
No Clitches (i.e true P N P). ???

sounds very promising..........
Time for a 6 speed swap then.

fsttyms1

No... As stated before, these modules trick the existing ECU into thinking there is an auto hooked up

poisx7

iTrader: (1)

so since nobody that has really done it answered ??
i say fsttyms1, u have done this b4 , so ..... Did you have to remove the VSA when u did ur swap ?

fsttyms1

I did because i used the CLS ECU. That motor and trans setup doesnt have it. Im sure you can keep it with the modules, but it may not work the same (and the motor may stall out ???? (no torque converter/auto trans to keep the motor running)???

abptltypes02

i was thinkin... is the passanger side parking mirror not going to work anymore?

Richie v6

Not sure about this one, I have the set up runing on a Accord right now and the ECU doesn't really miss it.

All the Acura 6 speeds have LSD the Honda ones do not.

Not sure about this one yet the 99 ecu is a beast I haven't messed with yet. Hopefully someone is willing to test it.


As of right now only me there are a few running the Odyssey ECU. There are about 4 cars waiting for this module once it comes out we will know for sure.

phee

iTrader: (5)

I'm willing to test out the module for the 99 my swap is in progress already. I'd be more than willing to work something out with you

BlackuraTL

So if this gets worked out and works what would the total be for a whole manual conversion now

tegkid

iTrader: (7)

$99.99

fsttyms1

There is NO set #. Not every one is going to get the same price on parts. Some find good deals, some pull the parts themselves from the salvage yards, some buy new. As demand goes up so do prices.

BlackuraTL

Well yeah but for one right now without this module thing isnt it like a couple grand

phee

iTrader: (5)

research. there are 2 6mt swaps in the first page of the second gen section BOTH with parts list and mine even has prices

Richie v6

Everything is working with the type-s ecu.

Richie v6

The harness will run about $500 and I charge $1000 labor for the complete swap. The price of the parts depends on how hard you search.

fsttyms1

Its a couple grand for just the parts even if you use module. The module will save you from having to buy a different motor/ecu/wiring harnesses and make life a lot easier.

dasuddith33

iTrader: (1)

Sweet Good deal Richie!!!!!!!

spiro

Is this harness is going to have a plug of some sort?
Splicing into the orig harness is how it will have to be installed?

twistedwedge

I would imagine its going to be plug and play, no?

Nice work Richie!

phee

iTrader: (5)

good old rich

spiro

Trans gave up on my 2003 tlp. How is the module test going?

phee

iTrader: (5)

working with the tl-s and ody ecu.

Richie v6

I do plan on offering a complete engine harness for those that do not want to modify their own. Or doing it as a service.

Richie v6

Everything is working fine the first module/harness shipped out today to Paul he will install it in Nates car. Hopefully it is problem free and I can start mass producing these. So far it is working fine on the TL-s and Odyssey ECU. Next I will work on something for the 4 speed automatic transmissions.

spiro

Can you elaborate a little more on what needs to de done in order to install this harness? Or posible post the installation procedure.

JCharged

iTrader: (5)

lovely.

bigmark89

Im bringing this thread back, and I really wanna know the installation process. Does it just plug right into the ECU or is there splicing involved???

-Mark

vanirl

This is awesome! I wish Acura would have produced the TL with an optional 6spd manual like they did with the CL. In any case, thank God for techies like RichieV6, fatyms, and others who are making it an aftermarket possibility! I'm sick and tired of my automatic transmission..and I miss driving a stick-shift car. The economy isn't the friendliest right now, but as SOON as I have the money togther to do the swap, it will be done.
RichieV6 - you said you'd charge $1500 for the module and the labor. What state do you live in, and how long does it take to complete the swap?
And is there anyone else who would consider taking the swap job?

JCharged

iTrader: (5)

^ Richie is in IL.

Richie and I could recommend someone to you if you don't plan on driving up to IL.

phee

iTrader: (5)

if you wanna drive to atlanta, i can do it for cheaper than that

ZEUS'O3TL

Richie as an awesome guy...met him at the Illinois meet Saturday...