Just recently had a head gasket replaced. And now car wont exceed pass 60mph. And the rpm wont go over 4... Anybody have a idea?

 

is there a CEL?

 

not really sure what u mean.. lol... CEL?

 

Check Engine Light?

 

yes and maintenance required light

 

have the check engine light(CEL) scanned to see what codes are popping up.

the codes will tell you whats wrong with the car.

 

Yea i told him that... so we gone do that... and see wats up... good look...

 

report back.

 

the maintenance required light means you probably need an oil change you have to hold the two buttons to the right of the steering wheel(trip n select) with your left hand then turn the car 3 click over(with your right hand) until it goes away

 

Def..... will do...!!

 

Thanx bro!

 

I was bored.. added alittle red affect!

 

we scanned the car and we got P1259 for the code!!

 

Possible causes
- Low engine oil pressure or level
- Open or short circuit condition
- Faulty VTEC oil pressure switch
- Faulty VTEC solenoid


Check engine oil to see if low, if low add oil!

 

Yea i knew What the codes was.. but we checked the oil.. its high.. i kno ots a bad shift solenoid on the transmission... or either the oil pressure switch... but i guess only thing to do is have a shop look at each solenoid... which is going to be a pain in the ass.. but oh well!!!