Turbo Kit Progress.... (pics)
#1
Safety Car
Thread Starter
Turbo Kit Progress.... (pics)
Well, the first manifold has been completed. We will make a jig and fabricate the second one next. IC's are finishing up, so we'll be ready to make the IC piping soon. E-Manage is installed (thanks to Scalbert's awesome PnP harness - thanks Steve!
).
Next step is to install the 370cc squirters and tune a base-line map for NA.
This kit is a significant improvement over the previous kit - in terms of design and aesthetics. Both are of good quality, but this improves flow significantly (3" to 2.75" downpipe all the way to the cat!). The turbo is the biggest difference. The previous one had its maximum output at 5400 RPM; we all know that this motor makes a good 20% more power from 5400 - 7200 RPM - which is what this system will realize.
Assembled Manifold pictures:
http://f1.pg.photos.yahoo.com/ph/gun...&.dnm=f179.jpg
Close-up:
http://f1.pg.photos.yahoo.com/ph/gun...76.jpg&.src=ph
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
Next step is to install the 370cc squirters and tune a base-line map for NA.
This kit is a significant improvement over the previous kit - in terms of design and aesthetics. Both are of good quality, but this improves flow significantly (3" to 2.75" downpipe all the way to the cat!). The turbo is the biggest difference. The previous one had its maximum output at 5400 RPM; we all know that this motor makes a good 20% more power from 5400 - 7200 RPM - which is what this system will realize.
Assembled Manifold pictures:
http://f1.pg.photos.yahoo.com/ph/gun...&.dnm=f179.jpg
Close-up:
http://f1.pg.photos.yahoo.com/ph/gun...76.jpg&.src=ph
Trending Topics
#10
Safety Car
Thread Starter
The current kit uses a GT35R ball-bearing turbo, the E-manage, upgraded injectors and 100% stainless-steel... so cost would be about $6500 for a complete kit.
A downgraded version using a different turbo and only a FMU running at most 6psi would be just under $5K.
A downgraded version using a different turbo and only a FMU running at most 6psi would be just under $5K.
#15
Team Owner
Originally posted by shinobi
will the design/performance stats be the same for us 5MT Tl-S's?
will the design/performance stats be the same for us 5MT Tl-S's?
LOL WTF is 5mt TLS?
Looks Niceee... allmotor, u should help me working my on g35 some times
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
#22
Safety Car
Thread Starter
Remember there will be TWO identical kits - Bluecls6's as well
It has the potential for 450whp with 100-octane, we shall see. That would be (given a modest 15% drivetrain loss) ~530hp at the crank. I'll be happy with 500 crank hp
There are other issues to consider at this output level, so beyond the basic motor blowing up, I have to consider those as well.
On my setup, I have one of those QuikTime Electric Cutouts (you might notice the flange near the flex-pipe). It should offer the extra surge if I happen upon an Italian-type exotic.
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
It has the potential for 450whp with 100-octane, we shall see. That would be (given a modest 15% drivetrain loss) ~530hp at the crank. I'll be happy with 500 crank hp
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
On my setup, I have one of those QuikTime Electric Cutouts (you might notice the flange near the flex-pipe). It should offer the extra surge if I happen upon an Italian-type exotic.
#23
Safety Car
Thread Starter
Originally posted by shinobi
will the design/performance stats be the same for us 5MT Tl-S's?
will the design/performance stats be the same for us 5MT Tl-S's?
#28
Safety Car
Thread Starter
Originally posted by pimpscls
do you think the car is capable of htting a 1/4 in under 12.5 ?
do you think the car is capable of htting a 1/4 in under 12.5 ?
My last setup would have hit mid 12's on slicks (~350whp).
#31
EVO IX MR
Join Date: Oct 2003
Location: Tucson, AZ
Age: 48
Posts: 685
Likes: 0
Received 0 Likes
on
0 Posts
Question: This is for the 6-speed? You think it would hit 12's with just the turbo, or is that including headers/exaust/cai/suspension/ etc. etc? Just curious. Can you have a supercharger AND a turbo on at the same time, or does tis take the place of the S/C??
#33
Flap.
Join Date: May 2003
Location: St. Louis, Mo USA
Age: 38
Posts: 5,170
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 2003type-s6
Can you have a supercharger AND a turbo on at the same time, or does tis take the place of the S/C??
Can you have a supercharger AND a turbo on at the same time, or does tis take the place of the S/C??
rofl... go look at an engine some time.
![rtfm](https://acurazine.com/forums/images/smilies/rtfm.gif)
#34
Suzuka Master
Join Date: Sep 2000
Location: Woodstock, GA
Age: 54
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 2003type-s6
Question: This is for the 6-speed? You think it would hit 12's with just the turbo, or is that including headers/exaust/cai/suspension/ etc. etc? Just curious. Can you have a supercharger AND a turbo on at the same time, or does tis take the place of the S/C??
Question: This is for the 6-speed? You think it would hit 12's with just the turbo, or is that including headers/exaust/cai/suspension/ etc. etc? Just curious. Can you have a supercharger AND a turbo on at the same time, or does tis take the place of the S/C??
Yes, you can have both an SC and a turbo. It is not practically or economical but can and has been done. In this case he is just installing a turbo.
#35
Sold but not Forgotten...
Join Date: Jan 2004
Location: Mississauga, ON
Posts: 1,557
Likes: 0
Received 0 Likes
on
0 Posts
Only for six speed...
if they can make it for the auto without our granny transmission going down...
do you guys think an autoversion will be available?
![Frown](https://acurazine.com/forums/images/smilies/frown.gif)
do you guys think an autoversion will be available?
#36
Suzuka Master
Join Date: Sep 2000
Location: Woodstock, GA
Age: 54
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by babyblue
Do you guys think an autoversion will be available?
Do you guys think an autoversion will be available?
#37
drop em like its hot
Join Date: Apr 2004
Location: West Harlem, NY
Age: 41
Posts: 2,449
Likes: 0
Received 0 Likes
on
0 Posts
which companies make a better AT for the CL? next time my tranny dies im either gonna trade it in or get a non-honda tranny... i'll sell out and get a goddamn G35
#39
Safety Car
Thread Starter
Originally posted by haiduc
routing the wastegate back into the exhaust?
routing the wastegate back into the exhaust?
![Frown](https://acurazine.com/forums/images/smilies/frown.gif)
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)