P2R Billet Intake Manifold Plenums
#241
EVERYTHING IS FOR SALE!
Join Date: Mar 2007
Location: Denver
Age: 37
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TCM 01 CL-S
I am all set for testing! Just waiting on my Apexi NEO to arrive (ETA is Thursday).
I had my neo installed/dyno tuned and it reset twice just like everyone said it would. I only had it hooked up for 4 days to. gc86 had better luck with his but his just acted up to. Maybe its the way you wire it. I dont think accord----- has had that problem.
--------------------------------
Cant wait to see results of before and after CleanCL.
#242
Suzuka Master
iTrader: (4)
Originally Posted by NEVERSUMMER
Very sorry to disapoint you but....
I had my neo installed/dyno tuned and it reset twice just like everyone said it would. I only had it hooked up for 4 days to. gc86 had better luck with his but his just acted up to. Maybe its the way you wire it. I dont think accord----- has had that problem.
--------------------------------
Cant wait to see results of before and after CleanCL.
I had my neo installed/dyno tuned and it reset twice just like everyone said it would. I only had it hooked up for 4 days to. gc86 had better luck with his but his just acted up to. Maybe its the way you wire it. I dont think accord----- has had that problem.
--------------------------------
Cant wait to see results of before and after CleanCL.
#243
EVERYTHING IS FOR SALE!
Join Date: Mar 2007
Location: Denver
Age: 37
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CleanCL
who said it would reset?
#244
Well...it's kinda fast...
Join Date: Oct 2006
Location: Loovull, KY
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
3 of my buddies also have the A'PEXi Neo (2 Honda's, 1 Acura) and have had them for several months with no issues. All of them are using the Boomslang harnesses, so it could be related to wiring.
#245
EVERYTHING IS FOR SALE!
Join Date: Mar 2007
Location: Denver
Age: 37
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 2CLean
3 of my buddies also have the A'PEXi Neo (2 Honda's, 1 Acura) and have had them for several months with no issues. All of them are using the Boomslang harnesses, so it could be related to wiring.
#246
Well...it's kinda fast...
Join Date: Oct 2006
Location: Loovull, KY
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
Hmm, weird. Does anyone know if the Neo alters the fuel maps before it goes to the ECU or does it take the readings from the ECU and then applies it's calculations to make the necessary changes? If it's the latter, that would explain the ECU reverting back to the stock maps. Not sure if the Boomslang is wired in such a way to bypass this I guess I'll ask my friends that own it.
edit: sorry for the highjack...back on topic now.
edit: sorry for the highjack...back on topic now.
#247
Uses turn signals in my
Originally Posted by NEVERSUMMER
Very sorry to disapoint you but....
I had my neo installed/dyno tuned and it reset twice just like everyone said it would. I only had it hooked up for 4 days to. gc86 had better luck with his but his just acted up to. Maybe its the way you wire it. I dont think accord----- has had that problem.
--------------------------------
Cant wait to see results of before and after CleanCL.
I had my neo installed/dyno tuned and it reset twice just like everyone said it would. I only had it hooked up for 4 days to. gc86 had better luck with his but his just acted up to. Maybe its the way you wire it. I dont think accord----- has had that problem.
--------------------------------
Cant wait to see results of before and after CleanCL.
#248
4drs just wanna have fun!
iTrader: (1)
Originally Posted by fsttyms1
I dont have the clearance to install them with the type-s motor in my TL-P or id install them as well. As it stands im VERY close to hitting the hood with the motor.
So what kinds of plans are there for anodizing color wise, how about polishing?
#249
Uses turn signals in my
Originally Posted by Accord_V6_400m
Ya!! Another club member, I feel sorry for the poor sap that I run over, hes goingn to hit IM like no other no crumpling pf any kind.
So what kinds of plans are there for anodizing color wise, how about polishing?
So what kinds of plans are there for anodizing color wise, how about polishing?
#252
im gonna have to do that to my K20a rex, the hood wont close!!! crap!! oh well, you guys know of any hatches(shell) for sale? no salvages and si preffered.. paint dont matter im sending it to get painted, sorry for the hi jack but its a good place to get some 411..
#254
~~~~~~~~~~~
Originally Posted by Accord_V6_400m
How can you do that? Do you know something we don't
Just PM PowerRev and ask what colors. He told me they were going to make them black a few weeks ago.
#255
~~~~~~~~~~~
Originally Posted by Accord_V6_400m
Yeah i've thought about that whole cowl induction thing but my car isn't supposed to draw attention like that, kind of defeats the point of my sleeper sedan if the hood is proped up like that, that, or it just looks cheap like the body shop messed up.
#256
Senior Moderator
Originally Posted by Accord_V6_400m
Ya!! Another club member, I feel sorry for the poor sap that I run over, hes goingn to hit IM like no other no crumpling pf any kind.
Yea the spacer is
#257
Uses turn signals in my
Originally Posted by Accord_V6_400m
How can you do that? Do you know something we don't
#258
White Type-S
I've just learned of this mod. Excuse my ignorance, but in essence does this mod take off where the Outlaw Engineering thermoblock spacer left off? As in, the material it's made with will also reduce the transfer of heat, but will also increase the volume of air in the intake manifold? Correct me, if I'm wrong.
#259
Originally Posted by Accord_V6_400m
Yeah i've thought about that whole cowl induction thing but my car isn't supposed to draw attention like that, kind of defeats the point of my sleeper sedan if the hood is proped up like that, that, or it just looks cheap like the body shop messed up.
didnt know your car was supposed to be a sleeper
#260
Suzuka Master
iTrader: (4)
Originally Posted by sinfulj32
didnt know your car was supposed to be a sleeper
but i see no reason this shouldn't fit under the hood of an accord... even with the j32 swap.. the only real difference is everything internal.. actually the blocks are almost identical.
#261
Originally Posted by 2003TL-S
^^ I agree that looks really cheap, not how a CL/TL is supposed to look. If the Pilot spacer CLeanCL and I bought won't fit our cars, I don't know about him, but I will just take the spacer out until I can find a better solution to making it fit.
#262
yo quit hijackin p2r's thread. its bad as it is already that were talking about other ways to pick up power other than p2r parts. i think we needa keep it on topic with the P2R Plenums.
#263
4drs just wanna have fun!
iTrader: (1)
Originally Posted by 2003TL-S
^^ I agree that looks really cheap, not how a CL/TL is supposed to look. If the Pilot spacer CLeanCL and I bought won't fit our cars, I don't know about him, but I will just take the spacer out until I can find a better solution to making it fit.
I just got tired of the IM cover plate rubbing on the hood supports with no spacer in there. So I just said f'it and cut the middle ones out. Not sure how much space I have left but its not much.
Originally Posted by CleanCL
well it is a sedan =X
but i see no reason this shouldn't fit under the hood of an accord... even with the j32 swap.. the only real difference is everything internal.. actually the blocks are almost identical.
but i see no reason this shouldn't fit under the hood of an accord... even with the j32 swap.. the only real difference is everything internal.. actually the blocks are almost identical.
Yeah its a semi-sleeper, when I drive it people now its a stick and what not but it has such an OEM appeal to it with a pretty much stock interior and exterior.
#264
Suzuka Master
iTrader: (4)
Originally Posted by Accord_V6_400m
Have you tried cutting your hood supports? it will make the middle of the hood flimsier but nothing aestethically bad, unless while cutting the supports you dent the hood from underneath like me leaving a scar on the other side
I just got tired of the IM cover plate rubbing on the hood supports with no spacer in there. So I just said f'it and cut the middle ones out. Not sure how much space I have left but its not much.
The IM is much taller hence the problem, its the stuff on the engine that gives us the height problem
Yeah its a semi-sleeper, when I drive it people now its a stick and what not but it has such an OEM appeal to it with a pretty much stock interior and exterior.
I just got tired of the IM cover plate rubbing on the hood supports with no spacer in there. So I just said f'it and cut the middle ones out. Not sure how much space I have left but its not much.
The IM is much taller hence the problem, its the stuff on the engine that gives us the height problem
Yeah its a semi-sleeper, when I drive it people now its a stick and what not but it has such an OEM appeal to it with a pretty much stock interior and exterior.
#266
4drs just wanna have fun!
iTrader: (1)
Originally Posted by CleanCL
i still think P2Rs plenums might fit... judging from their pictures, they didn't increase in height, the stock plenum cover is still the highest point... unless you were talking about the spacer.
#268
Uses turn signals in my
Originally Posted by gc86
So whats going on with the dynos? im sure some have already gotten their plenums, when is your dyno appointment scheduled for?
#272
Instructor
Thread Starter
Plenums are finished up finally. And they are shipping out today. Was suppose to ship out on friday, but didnt have fittings. So they will ship today