Edmonton Acuraziner's
#87
Suzuka Master
iTrader: (4)
this is all the possible ring sizes you can get. I don't know if there is anything more out there.
http://www.1010tires.com/hubrings.asp
http://www.1010tires.com/hubrings.asp
#91
Suzuka Master
iTrader: (4)
https://acurazine.com/forums/1g-tsx-tires-wheels-suspension-130/possible-fit-hubcentric-56-1mm-669673/#post9695376
read through this. If the hub bore on the wheel is less than 64.1, wheels have to re-drilled so you are shit out of luck there
read through this. If the hub bore on the wheel is less than 64.1, wheels have to re-drilled so you are shit out of luck there
#93
Suzuka Master
iTrader: (4)
yea man I bet that's a lot of headache. Hey do you want a light weight pulley to go with that exhaust? haha I am getting my timing belt done tomorrow and I am not sure if i want to install it or sell it. PM me if interested.
Last edited by myron; 03-22-2011 at 12:13 AM.
#94
Pro
Haha, I will give it a pass. I might even part out everything. You know how much money I put into that wheels. lol. I just got everything I need today minus the spacers and new type s kit. But we will see.
#97
6MT
ohh kool. good luck bro. and i am gonna do the tranny change this weekend. still haven't bought that GM stuff but gonna do it up on friday! let me know how bad your the old timing belt was? because according acura i am over due as well!
#100
Pro
I can, using non hub centric spacers. I've bewn researching since last night and I read that it's alright to use them. Cars before have been doing this for a long time. That's what I'm going to do, plus, the car is not going to see the track anyway.
#101
Pro
Thread Starter
Ohhh I see good to hear.
Lol guys how dirty have your cars been getting? Mine looked like a piece of turd on wheels the other day thanks to our fluctuating temperatures. I washed it yesterday and now it looks like a fresher piece of turd today.
Lol guys how dirty have your cars been getting? Mine looked like a piece of turd on wheels the other day thanks to our fluctuating temperatures. I washed it yesterday and now it looks like a fresher piece of turd today.
#102
6MT
^^ glad to hear that edmua6...cant wait to see how she looks . ya i washed mine about 2 weeks ago!!! its freaking point less to wash your car now a days specially if there white!! stupid weather :@! btw guys know anyone who does custom headlights in town? i need to get rid of the amber front marker/signal!
#103
Suzuka Master
iTrader: (4)
^^ glad to hear that edmua6...cant wait to see how she looks . ya i washed mine about 2 weeks ago!!! its freaking point less to wash your car now a days specially if there white!! stupid weather :@! btw guys know anyone who does custom headlights in town? i need to get rid of the amber front marker/signal!
#105
Pro
Thread Starter
I want to clear my headlights too. I was contemplating following the DIY since it doesn't seem too difficult, but there is the risk of ruining the headlights. Replacement headlight = $$$. If I do decide to go through with it, I wouldn't clear them until well into May. I have to finish exams first, then... DETAILING!!!
#106
6MT
^ yaa ill check 780 tuners. lol yaa i want my 6 bucks!! (edmua6) lol i found a site where you can get after market headlights (pair) with cleared corners but its $500!! LOL heres the link...
http://www.uniquestyleracing.com/20042008-20042008.html
but ya we need find someone who will do it for us. maybe get a group discount!
http://www.uniquestyleracing.com/20042008-20042008.html
but ya we need find someone who will do it for us. maybe get a group discount!
#107
Pro
vincent, yea it will be really expensive if it didn't work out.
ricky, it will be cheaper to find someone (professional) to do it. it will save you a couple hundred bucks
ricky, it will be cheaper to find someone (professional) to do it. it will save you a couple hundred bucks
#108
Suzuka Master
iTrader: (4)
I am sure that if you go to one of the well known shops in Edmonton they will do it but it's gonna be expensive. And underground racing doesn't ship to Canada, or that's what they told me a month or 2 ago.
also there is a thread on 780 about this, not my thread but I commented in there and no one stepped forward about doing it or had any input as to a shop that does it so i gave up on it for the time being.
also there is a thread on 780 about this, not my thread but I commented in there and no one stepped forward about doing it or had any input as to a shop that does it so i gave up on it for the time being.
#115
Suzuka Master
iTrader: (4)
I think I might be selling my wheels, not sure yet but will know in a month or so. If anyone is interested in axis shine wheels, 19x8.8 +35 offset let me know and I will PM you when I decided what I am doing. My legal battle took the turn for the worse today so I might need the money. Still got a month till anything is final so that's why I am waiting a month
#117
Oh man. I know too many people in this thread! lol
Whats up Vincent and Myron!
Ricky!!! and Rajvir!! You two are oblivious to each other.
Rajvir is Arv's Brother! :P :P
Oh hi. Im Sanjay.
Whats up Vincent and Myron!
Ricky!!! and Rajvir!! You two are oblivious to each other.
Rajvir is Arv's Brother! :P :P
Oh hi. Im Sanjay.