I have a set of 10mm non hubcentric ones but some of the bolts are in rough shape. You can always order a few bolts online for cheap. If you want them we can work out a deal or something for the ingalls kit if you still have it. I would put money on top off course.

 

it's almost impossible to find hub centric rings for my bbs.

 

whats the hub on the wheels again?

 

i'm looking for 25mm and 20mm.

 

uhhh i forgot. haha

 

how do you know it's impossible to find them then haha

 

this is all the possible ring sizes you can get. I don't know if there is anything more out there.

http://www.1010tires.com/hubrings.asp

 

58.4mm

 

and if you do get the hubcentric spacers, you don't have to use the hubcentric ring from the spacer and boom, you are good to go. Did you get the 25mm spacers from vinsanity?

 

no i did not get them because they are hub centric.

 

https://acurazine.com/forums/showthread.php?p=9695376

read through this. If the hub bore on the wheel is less than 64.1, wheels have to re-drilled so you are shit out of luck there

 

lol. i'm really starting to hate this project.

 

yea man I bet that's a lot of headache. Hey do you want a light weight pulley to go with that exhaust? haha I am getting my timing belt done tomorrow and I am not sure if i want to install it or sell it. PM me if interested.

 

Haha, I will give it a pass. I might even part out everything. You know how much money I put into that wheels. lol. I just got everything I need today minus the spacers and new type s kit. But we will see.

 

haha all good man

 

hey, any good mechanic shops you guys can recommend? looking to get my front wheel bearings and lower ball joints replaced some time next month.

 

ohh kool. good luck bro. and i am gonna do the tranny change this weekend. still haven't bought that GM stuff but gonna do it up on friday! let me know how bad your the old timing belt was? because according acura i am over due as well!

 

@whpan...road runner automotive (romeo). south edmonton. hes the only guy i have been taking my car to since i moved to edmonton. 780-450-1978

 

Oh damn edmua6 you might not mount the BBS? That sucks.

 

I can, using non hub centric spacers. I've bewn researching since last night and I read that it's alright to use them. Cars before have been doing this for a long time. That's what I'm going to do, plus, the car is not going to see the track anyway.

 

Ohhh I see good to hear.

Lol guys how dirty have your cars been getting? Mine looked like a piece of turd on wheels the other day thanks to our fluctuating temperatures. I washed it yesterday and now it looks like a fresher piece of turd today.

 

^^ glad to hear that edmua6...cant wait to see how she looks . ya i washed mine about 2 weeks ago!!! its freaking point less to wash your car now a days specially if there white!! stupid weather :@! btw guys know anyone who does custom headlights in town? i need to get rid of the amber front marker/signal!

 

man I wanna do this too but I can't find anyone to do it and I am scared to do it myself. I even got new lenses ZKW-r

 

i washed mine last friday and i want my 5$ back. lol.

for clearing headlights, maybe ask someone in 780tuners?

 

I want to clear my headlights too. I was contemplating following the DIY since it doesn't seem too difficult, but there is the risk of ruining the headlights. Replacement headlight = $$$. If I do decide to go through with it, I wouldn't clear them until well into May. I have to finish exams first, then... DETAILING!!!

 

^ yaa ill check 780 tuners. lol yaa i want my 6 bucks!! (edmua6) lol i found a site where you can get after market headlights (pair) with cleared corners but its $500!! LOL heres the link...
http://www.uniquestyleracing.com/20042008-20042008.html
but ya we need find someone who will do it for us. maybe get a group discount!

 

vincent, yea it will be really expensive if it didn't work out.

ricky, it will be cheaper to find someone (professional) to do it. it will save you a couple hundred bucks

 

I am sure that if you go to one of the well known shops in Edmonton they will do it but it's gonna be expensive. And underground racing doesn't ship to Canada, or that's what they told me a month or 2 ago.

also there is a thread on 780 about this, not my thread but I commented in there and no one stepped forward about doing it or had any input as to a shop that does it so i gave up on it for the time being.

 

i was looking at 1010tires.com for hub centric rings and they only have 64.15mm. I know ours is 64.1mm, is 64.15mm good enough?

 

yea that's fine. .01mm you can't even see. But how are you gonna get hubcentric rings when your hub bore on the wheel is smaller then the hub on the car. It only works one way.

 

I need it for the spacers, the bore is 73mm. Thanks myron!

 

oh if the bore is 73 then yea all good. You said it's 58. something before haha

 

all this wheel talk is confusing the hell out of me!!! haha but i sure know who to go to when it comes to wheels! lol

 

Haha. Sorry for the clatter, at least for now i don't have any questions. I'm getting my Nitto Invos mounted tomorrow

 

I think I might be selling my wheels, not sure yet but will know in a month or so. If anyone is interested in axis shine wheels, 19x8.8 +35 offset let me know and I will PM you when I decided what I am doing. My legal battle took the turn for the worse today so I might need the money. Still got a month till anything is final so that's why I am waiting a month

 

sucks to hear that.. i hope everything will be settled.

 

Oh man. I know too many people in this thread! lol
Whats up Vincent and Myron!

Ricky!!! and Rajvir!! You two are oblivious to each other.

Rajvir is Arv's Brother! :P :P

Oh hi. Im Sanjay.

 

haha What's up Darkness, you came in here looking for a fix for that door scratch?

 

Nopers! I already knew how to fix it. I just wasnt fond of using bondo.

On that note, people should post a picture of their rides So here are mine

 

haha darkness!! get a new bumper yet? and a door scratch? when did that happen?