Edmonton Acuraziner's
#5281
TL Owner
Anytime in the afternoon or later is fine with me.
Yea, he doesn't ship to Canada anymore since his dealer Curry Acura lost their Fed-Ex International Shipping Agreement to send packages to locations in Canada. I'll probably just get it from Hansel Acura since one of my buddies who's also on this forum got it from them. $960 USD shipped with all fees included.
Yea, he doesn't ship to Canada anymore since his dealer Curry Acura lost their Fed-Ex International Shipping Agreement to send packages to locations in Canada. I'll probably just get it from Hansel Acura since one of my buddies who's also on this forum got it from them. $960 USD shipped with all fees included.
@dctls08 - if you have facebook, which I assume you do join the Acura Generation 3 group, theres a guy in the group called Bruce Oswiak, he owns a shop called EndlessRPM, he literally focuses on Acura TL's. He can get parts for cheap and quick from what I hear, so give him a message.
https://www.facebook.com/pages/Endle...06154452784067
#5282
Advanced
Yeah sure, I'm down for a meet be nice to see what everyone is up to.
@dctls08 - if you have facebook, which I assume you do join the Acura Generation 3 group, theres a guy in the group called Bruce Oswiak, he owns a shop called EndlessRPM, he literally focuses on Acura TL's. He can get parts for cheap and quick from what I hear, so give him a message.
https://www.facebook.com/pages/Endle...06154452784067
Bruce doesn't ship packages to canada any more. I got lucky with my roof spoiler from him.
side note: installed my switch backs today. Looks good.
#5284
Instructor
Yeah sure, I'm down for a meet be nice to see what everyone is up to.
@dctls08 - if you have facebook, which I assume you do join the Acura Generation 3 group, theres a guy in the group called Bruce Oswiak, he owns a shop called EndlessRPM, he literally focuses on Acura TL's. He can get parts for cheap and quick from what I hear, so give him a message.
https://www.facebook.com/pages/Endle...06154452784067
@dctls08 - if you have facebook, which I assume you do join the Acura Generation 3 group, theres a guy in the group called Bruce Oswiak, he owns a shop called EndlessRPM, he literally focuses on Acura TL's. He can get parts for cheap and quick from what I hear, so give him a message.
https://www.facebook.com/pages/Endle...06154452784067
#5285
TL Owner
Haha I have no idea they were related lol never got his name.
Funny story reason why I love the 4G more now, still miss my 3G but I was on the henday and this 07 TL-S pulled up next to me, we're both going 110. Race ensues, I double down shift into 3rd from 5th and instantly destroy him. Gotta love the SH-AWD and the extra HP.
Funny story reason why I love the 4G more now, still miss my 3G but I was on the henday and this 07 TL-S pulled up next to me, we're both going 110. Race ensues, I double down shift into 3rd from 5th and instantly destroy him. Gotta love the SH-AWD and the extra HP.
#5287
Burning Brakes
Haha I have no idea they were related lol never got his name.
Funny story reason why I love the 4G more now, still miss my 3G but I was on the henday and this 07 TL-S pulled up next to me, we're both going 110. Race ensues, I double down shift into 3rd from 5th and instantly destroy him. Gotta love the SH-AWD and the extra HP.
Funny story reason why I love the 4G more now, still miss my 3G but I was on the henday and this 07 TL-S pulled up next to me, we're both going 110. Race ensues, I double down shift into 3rd from 5th and instantly destroy him. Gotta love the SH-AWD and the extra HP.
#5289
Instructor
wouldnt the 4G be way gone before either cars even hit the governers ?
#5291
Burning Brakes
#5302
Burning Brakes
Speaking of headlights, I just picked up two replacement HID bulbs, as my passenger side went out. But when I brought the car in to Auto Details to get the fender damage worked on (they did nice work, byt the way...I'll post some picks once i can wash it), I noticed the passenger side housing was full of condensation. Looks like I need a new one. Who in town would you guys recommend for getting that done?
#5303
Intermediate
For those who ordered a jpipe, where did you get it installed? Not mechanically inclined so looking for a reputable shop that will install it for me. Preferably in the west or south.
#5304
Suzuka Master
iTrader: (4)
Speaking of headlights, I just picked up two replacement HID bulbs, as my passenger side went out. But when I brought the car in to Auto Details to get the fender damage worked on (they did nice work, byt the way...I'll post some picks once i can wash it), I noticed the passenger side housing was full of condensation. Looks like I need a new one. Who in town would you guys recommend for getting that done?
#5305
TL Owner
I bring my stuff to a place called Brookview Auto Service, clean place and good staff. They're located just off whitemud on 50 street, near the Leons. My car is there now as we speak...
#5307
Burning Brakes
I'd need to do that after every wash. There's a small crack in the lens. Doesn't look like it would be a problem, but clearly it is. I suspect that's why the bulb died early (and those bulbs aren't cheap, either).
Last edited by sockpuppet; 05-16-2014 at 04:12 PM.
#5308
Instructor
Speaking of headlights, I just picked up two replacement HID bulbs, as my passenger side went out. But when I brought the car in to Auto Details to get the fender damage worked on (they did nice work, byt the way...I'll post some picks once i can wash it), I noticed the passenger side housing was full of condensation. Looks like I need a new one. Who in town would you guys recommend for getting that done?
#5309
Burning Brakes
I'll get some pics (before and after) up when I have a moment.
#5310
Instructor
They fixed a chip in the rear driver door, and then repainted the damaged fender (rear driver) to like new. They did really nice work. Also took care of the minor pitting along the bottom of the body, right in from of the rear wheel. That was $1,000. For an extra $150, they did a couple of paintless ding repairs on the other side. Oh, and after they went all the way around and touched up any spots they saw, and left me with the leftover latex paint for future touch-ups.
I'll get some pics (before and after) up when I have a moment.
I'll get some pics (before and after) up when I have a moment.
so i finally got around to putting rdx caliper covers on, but problems....
one lug wont come off no matter what i do, so now i only have a cover on one side....
also, lost my wheel lock key, bought another one for $25 from dealer, i somehow managed to strip it today... fml
#5311
Advanced
thats pretty good, i'll have to get a quote from them.
so i finally got around to putting rdx caliper covers on, but problems....
one lug wont come off no matter what i do, so now i only have a cover on one side....
also, lost my wheel lock key, bought another one for $25 from dealer, i somehow managed to strip it today... fml
so i finally got around to putting rdx caliper covers on, but problems....
one lug wont come off no matter what i do, so now i only have a cover on one side....
also, lost my wheel lock key, bought another one for $25 from dealer, i somehow managed to strip it today... fml
How hard is it to install those rdx calipers? Im tired of looking at my ugly rears.
Side note: Anyone know any good spots to take pictures at? be it day or dark out? Im trying to get some nice pics tomorrow.
thanks
#5312
TL Owner
@Jriddle8 - a good back drop/place to take pics is the parkade at NAIT. Usually no one parks on the top floor and you get can get a good view of downtown and the city airport.
So meet this sunday at 5pm at the Timmies just south of United Cycle?
So meet this sunday at 5pm at the Timmies just south of United Cycle?
Last edited by ArenHam; 05-17-2014 at 12:47 AM.
#5314
Instructor
102st parkade? everyone goes there pretty much lol
i also really like Gallagher Park/Connors Hill, edmontons whole downtown skyline is beyond that hill !
The following users liked this post:
Jriddle8 (05-17-2014)
#5316
TL Owner
Anyways hope to see you all tomorrow at 5 for the meet.