3G TL (2004-2008)
Sponsored by:
Sponsored by:

Mirror wiring diagram

Thread Tools
 
Search this Thread
 
Old 08-19-2017, 06:11 PM
  #1  
Advanced
Thread Starter
 
4DGSR's Avatar
 
Join Date: Mar 2008
Age: 47
Posts: 92
Likes: 0
Received 0 Likes on 0 Posts
Mirror wiring diagram

Hi guys,

Need some help locating the wiring diagrams for a 2007-2008 side mirrors and the 2004-2006 side mirrors. Going to swap mine out, I have a 2005 and picked some up from a 2007-2008 with blinker.

I did a quick search and didn't come up with anything.

Thanks for the help!
Old 08-19-2017, 06:18 PM
  #2  
Suzuka Master
 
truonghthe's Avatar
 
Join Date: Jun 2008
Age: 36
Posts: 7,952
Received 1,687 Likes on 1,303 Posts
There is a DIY thread about this however I suspect most of the pics goes MIA since photobucket decide to be a bucket of turd.


Edit: Found the thread with update pics of wiring diagram.

https://acurazine.com/forums/3g-tl-a...-637014/page3/


Here another one with some pics.
https://acurazine.com/forums/third-g...-06-tl-779015/

Last edited by truonghthe; 08-19-2017 at 06:23 PM.
Old 08-20-2017, 02:18 AM
  #3  
Advanced
Thread Starter
 
4DGSR's Avatar
 
Join Date: Mar 2008
Age: 47
Posts: 92
Likes: 0
Received 0 Likes on 0 Posts
Thanks. Just noticed the driver mirror I picked up has a cut harness. Still need to see the wire colors...
Old 08-21-2017, 01:57 PM
  #4  
Racer
iTrader: (2)
 
DesertMistTL's Avatar
 
Join Date: Jan 2014
Posts: 391
Received 103 Likes on 60 Posts
I did this recently.




Driver side is easiest to wire.
- Pink Wire with Black line is the blinkers
-Tap the wire and run it through the door through the grommet of the door
-Open up your door sill and open the loom. Look for a redwire with a blue line , tap that ur done.

Passenger
-Pink wire with black line is the blinker
-Run the wire back to the turn signal in rear, it's the white wire.
*I could not find the correct white wire in the door sill of passenger side after 5 different white wires--so i gave up and ran the wire back to rear turn signal. You COULD wire to front turn signal but there is literally no room to solder without taking off wheel, fender liner/bumper

GLUCK!


Last edited by DesertMistTL; 08-21-2017 at 02:01 PM.
Old 08-22-2017, 08:56 PM
  #5  
Advanced
Thread Starter
 
4DGSR's Avatar
 
Join Date: Mar 2008
Age: 47
Posts: 92
Likes: 0
Received 0 Likes on 0 Posts
Thanks. Going to pop off the panels tomorrow and try hooking them up.
Old 04-24-2019, 12:21 PM
  #6  
2nd Gear
 
Real Raf's Avatar
 
Join Date: Apr 2019
Age: 26
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by DesertMistTL
I did this recently.




Driver side is easiest to wire.
- Pink Wire with Black line is the blinkers
-Tap the wire and run it through the door through the grommet of the door
-Open up your door sill and open the loom. Look for a redwire with a blue line , tap that ur done.

Passenger
-Pink wire with black line is the blinker
-Run the wire back to the turn signal in rear, it's the white wire.
*I could not find the correct white wire in the door sill of passenger side after 5 different white wires--so i gave up and ran the wire back to rear turn signal. You COULD wire to front turn signal but there is literally no room to solder without taking off wheel, fender liner/bumper

GLUCK!

What do I do with the red and blue wire ?
Old 05-04-2019, 02:29 AM
  #7  
Racer
iTrader: (2)
 
DesertMistTL's Avatar
 
Join Date: Jan 2014
Posts: 391
Received 103 Likes on 60 Posts
solder
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Amon Gift
3G TL Audio, Bluetooth, Electronics & Navigation
3
08-23-2022 08:40 AM
mrphilipanderson
4G TL Audio, Bluetooth, Electronics & Navigation
0
11-18-2016 06:58 PM
EE4Life
2G NSX (2017+)
0
07-14-2016 09:09 PM
rets
3G TL (2004-2008)
5
01-01-2013 09:50 PM
JSuppi
Audio, Video, Electronics & Navigation
2
10-14-2001 09:29 AM



Quick Reply: Mirror wiring diagram



All times are GMT -5. The time now is 07:52 PM.