When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
picked up an Apexi WS2 cat back for the car off craigslist, and ordered a set of lowering springs. Gonna have the car moddded before i get permanent plates on it lol.
I registered here because I'm thinking about picking up a 4th gen TL SH-AWD 6MT to replace my 335i 6MT but... I can't find one within 500 miles to even test drive. So I'm reaching out here because I'd love to:
1.) Find a car to check out to even see if I should be barking up this particular tree. I've driven the 5A and 6A TLs, but that third pedal makes a big difference.
2.) Put out feelers to see if anyone is thinking about moving on to something else and wants to sell their manual 4G TL.
3.) See if anyone wants to come to the twin turbo dark side =D
Any help would be appreciated. Happy to exchange some seat time in my tuned 335i for anyone curious about them. Time is of the essence because there are a lot of G37s around for sale and I don't want to do something impulsive I'm in the North Dallas/Richardson area FWIW.
I registered here because I'm thinking about picking up a 4th gen TL SH-AWD 6MT to replace my 335i 6MT but... I can't find one within 500 miles to even test drive. So I'm reaching out here because I'd love to:
1.) Find a car to check out to even see if I should be barking up this particular tree. I've driven the 5A and 6A TLs, but that third pedal makes a big difference.
2.) Put out feelers to see if anyone is thinking about moving on to something else and wants to sell their manual 4G TL.
3.) See if anyone wants to come to the twin turbo dark side =D
Any help would be appreciated. Happy to exchange some seat time in my tuned 335i for anyone curious about them. Time is of the essence because there are a lot of G37s around for sale and I don't want to do something impulsive I'm in the North Dallas/Richardson area FWIW.
My 5at would be no help lol
i would say this tho the tl has a slight bit of a punch on takeoff bs a 335i I had an 08 and I feel a difference but the BMW felt a hell of a lot lighter
but cornering in the shawd is a must try lolnever get nothing like it.
We used to have lunch meets or around 2pm on a sunday. All the OG Azine ppl sold their cars and are gone and it dwindled to nothing at meets but like 3 ppl. Im an Admin with TXTL so ill post the new date for the meet up there.
I registered here because I'm thinking about picking up a 4th gen TL SH-AWD 6MT to replace my 335i 6MT but... I can't find one within 500 miles to even test drive. So I'm reaching out here because I'd love to:
1.) Find a car to check out to even see if I should be barking up this particular tree. I've driven the 5A and 6A TLs, but that third pedal makes a big difference.
2.) Put out feelers to see if anyone is thinking about moving on to something else and wants to sell their manual 4G TL.
3.) See if anyone wants to come to the twin turbo dark side =D
Any help would be appreciated. Happy to exchange some seat time in my tuned 335i for anyone curious about them. Time is of the essence because there are a lot of G37s around for sale and I don't want to do something impulsive I'm in the North Dallas/Richardson area FWIW.
Damn thats far! Why it gotta be all the way on the other side from where we live....LOL
My team lives in Ft. Worth mostly. I drive there a lot. Cheap houses over there vs Plano area. It is what it is. lol Ill set something up over on the east side or middle soon when the weather is nice.
Has anyone else had the airbag recall on their car the guy at the dealer unplugged mine a couple months ago and told me to leave it that way. And they would call when ready. They were trying to make me park it and use a rental but I wasn't about to drive a Camry.
It's a liability and they do not want metal shards flying in your face if it does explode because lawsuits have happened and people have died. The takata airbag recall spans quite a few makes. We have them at Lexus. As of right now we do have parts coming in but there is a line for them. You may want to talk to your service advisor and try to get on that line. I think Acura should have the parts by now. As I recall overhearing they should have parts coming in this month or next month. Best bet is to just keep on calling whichever dealership and figure it out from there.
It's a liability and they do not want metal shards flying in your face if it does explode because lawsuits have happened and people have died. The takata airbag recall spans quite a few makes. We have them at Lexus. As of right now we do have parts coming in but there is a line for them. You may want to talk to your service advisor and try to get on that line. I think Acura should have the parts by now. As I recall overhearing they should have parts coming in this month or next month. Best bet is to just keep on calling whichever dealership and figure it out from there.
I'm on the list supposedly they told me it would be about a month or two before I could get it and it's been 4-5 months since
They are a bit inconsistent...the problem with that meet was they changed it like 3 times. Just pick a date and stick with it...that sucks you had to drive that way for nothing. It aint close!
So thanks to everyone here and on FB, I'm now a 4th gen 6MT owner \o/
I've been working on the car, just getting it to a state where I prefer my daily driver (less lows, smaller wheels, as lame as that sounds). I wanted to make it out to the meet, but I was too busy selling my old car, so I can't complain too much.
I have a couple of questions for the DFW guys on here:
1.) Does anyone in the area have a 4th gen SH-AWD with any performance mods? Stuff like a ktuner, j-pipe or exhaust work, etc.? I'm looking to maybe get a bit more exhaust volume as right now all you hear is induction noise inside the car. Picking up some HP in the process would be nice too.
2.) Would anyone be interested in some Vossen CV7s with tires and TPMS? The car looked great on the wheels but my days of 20s and scraping everywhere are behind me.
Corey on TxTL has a 4th gen w/ Ktuner on it. Not sure what else he's done to it, but you'll probably be able reach him better on TxTL. People here on Acurazine are usually the OGs....LOL
I still have these sitting in my garage all bagged up and ready to go to a good home.... $1000 or Make me a reasonable offer.
19" Konig oversteer opal rims & Goodyear Eagle 235-35-19
(Set of 4) 19" Konig Oversteer opal rims 5x114 (Acura/Honda)
Goodyear Eagle F1 Asymmetric All Season 235-35-19
Discount Tire road hazard (transferable)
lock lugs
First be sure to do the sh-and relearnes or the car may feel bogged down under powered and heavy it's advised after changing wheels suspension and alignments
Originally Posted by zmt
So thanks to everyone here and on FB, I'm now a 4th gen 6MT owner \o/
I've been working on the car, just getting it to a state where I prefer my daily driver (less lows, smaller wheels, as lame as that sounds). I wanted to make it out to the meet, but I was too busy selling my old car, so I can't complain too much.
I have a couple of questions for the DFW guys on here:
1.) Does anyone in the area have a 4th gen SH-AWD with any performance mods? Stuff like a ktuner, j-pipe or exhaust work, etc.? I'm looking to maybe get a bit more exhaust volume as right now all you hear is induction noise inside the car. Picking up some HP in the process would be nice too.
2.) Would anyone be interested in some Vossen CV7s with tires and TPMS? The car looked great on the wheels but my days of 20s and scraping everywhere are behind me.
Yea his cars slow lol. Jk not sure what he has besides exhaust and k tuner but I'll kill him on the beginning and then he has me after 3rd gear
Originally Posted by Duronn
Corey on TxTL has a 4th gen w/ Ktuner on it. Not sure what else he's done to it, but you'll probably be able reach him better on TxTL. People here on Acurazine are usually the OGs....LOL
First be sure to do the sh-and relearnes or the car may feel bogged down under powered and heavy it's advised after changing wheels suspension and alignments
Got a link? I'm not sure what the AWD system would have to learn or re-learn in this case, but I'll check it out!
I sadly can't find anything about it I used a matco scanner to do it I forget what it does something with the torque converter and something else I'll look it up On the scanner once I get to the shop.
Originally Posted by zmt
Got a link? I'm not sure what the AWD system would have to learn or re-learn in this case, but I'll check it out!