Mirror wiring diagram

Thread Tools
 
Search this Thread
 
Old Aug 19, 2017 | 06:11 PM
  #1  
4DGSR's Avatar
Thread Starter
Advanced
 
Joined: Mar 2008
Posts: 92
Likes: 0
Mirror wiring diagram

Hi guys,

Need some help locating the wiring diagrams for a 2007-2008 side mirrors and the 2004-2006 side mirrors. Going to swap mine out, I have a 2005 and picked some up from a 2007-2008 with blinker.

I did a quick search and didn't come up with anything.

Thanks for the help!
Reply
Old Aug 19, 2017 | 06:18 PM
  #2  
truonghthe's Avatar
Suzuka Master
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Jun 2008
Posts: 7,967
Likes: 1,702
There is a DIY thread about this however I suspect most of the pics goes MIA since photobucket decide to be a bucket of turd.


Edit: Found the thread with update pics of wiring diagram.

https://acurazine.com/forums/3g-tl-a...-637014/page3/


Here another one with some pics.
https://acurazine.com/forums/third-g...-06-tl-779015/

Last edited by truonghthe; Aug 19, 2017 at 06:23 PM.
Reply
Old Aug 20, 2017 | 02:18 AM
  #3  
4DGSR's Avatar
Thread Starter
Advanced
 
Joined: Mar 2008
Posts: 92
Likes: 0
Thanks. Just noticed the driver mirror I picked up has a cut harness. Still need to see the wire colors...
Reply
Old Aug 21, 2017 | 01:57 PM
  #4  
DesertMistTL's Avatar
Racer
iTrader: (2)
 
Joined: Jan 2014
Posts: 391
Likes: 104
I did this recently.




Driver side is easiest to wire.
- Pink Wire with Black line is the blinkers
-Tap the wire and run it through the door through the grommet of the door
-Open up your door sill and open the loom. Look for a redwire with a blue line , tap that ur done.

Passenger
-Pink wire with black line is the blinker
-Run the wire back to the turn signal in rear, it's the white wire.
*I could not find the correct white wire in the door sill of passenger side after 5 different white wires--so i gave up and ran the wire back to rear turn signal. You COULD wire to front turn signal but there is literally no room to solder without taking off wheel, fender liner/bumper

GLUCK!


Last edited by DesertMistTL; Aug 21, 2017 at 02:01 PM.
Reply
Old Aug 22, 2017 | 08:56 PM
  #5  
4DGSR's Avatar
Thread Starter
Advanced
 
Joined: Mar 2008
Posts: 92
Likes: 0
Thanks. Going to pop off the panels tomorrow and try hooking them up.
Reply
Old Apr 24, 2019 | 12:21 PM
  #6  
Real Raf's Avatar
2nd Gear
 
Joined: Apr 2019
Posts: 2
Likes: 0
Originally Posted by DesertMistTL
I did this recently.




Driver side is easiest to wire.
- Pink Wire with Black line is the blinkers
-Tap the wire and run it through the door through the grommet of the door
-Open up your door sill and open the loom. Look for a redwire with a blue line , tap that ur done.

Passenger
-Pink wire with black line is the blinker
-Run the wire back to the turn signal in rear, it's the white wire.
*I could not find the correct white wire in the door sill of passenger side after 5 different white wires--so i gave up and ran the wire back to rear turn signal. You COULD wire to front turn signal but there is literally no room to solder without taking off wheel, fender liner/bumper

GLUCK!

What do I do with the red and blue wire ?
Reply
Old May 4, 2019 | 02:29 AM
  #7  
DesertMistTL's Avatar
Racer
iTrader: (2)
 
Joined: Jan 2014
Posts: 391
Likes: 104
solder
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Amon Gift
3G TL Audio, Bluetooth, Electronics & Navigation
3
Aug 23, 2022 08:40 AM
mrphilipanderson
4G TL Audio, Bluetooth, Electronics & Navigation
0
Nov 18, 2016 06:58 PM
EE4Life
2G NSX (2017+)
0
Jul 14, 2016 09:09 PM
rets
3G TL (2004-2008)
5
Jan 1, 2013 09:50 PM
JSuppi
Audio, Video, Electronics & Navigation
2
Oct 14, 2001 09:29 AM




All times are GMT -5. The time now is 04:33 AM.