xtcnrice's bwp cu2
The following users liked this post:
xtcnrice (02-11-2016)
#448
ROTAREDOM
someone post them side by side
#449
ROTAREDOM
bump
The following users liked this post:
xtcnrice (02-28-2016)
#452
ROTAREDOM
The following users liked this post:
xtcnrice (04-01-2016)
#453
Hey xtcnrice,
I saw your car today at church and dundas street. it looks amazing. knock on wood.
i was walking by church and saw tsx with blue calipers. at that moment, my mind began to wonder where i have seen this car before. lol
I saw your car today at church and dundas street. it looks amazing. knock on wood.
i was walking by church and saw tsx with blue calipers. at that moment, my mind began to wonder where i have seen this car before. lol
The following users liked this post:
xtcnrice (04-01-2016)
#454
ROTAREDOM
The following users liked this post:
xtcnrice (04-01-2016)
#455
VTEC just kicked in, yo!
Thread Starter
Sigh, just as I was about to put on my summers, I've been told we're about to experience a polar vortex, bringing temps back down to -8C or so
#456
ROTAREDOM
Thanks! Means a lot, especially since I'm still on my stockies/winters . I was with my buddy at Santouka ramen grabbing a bite to eat.
Sigh, just as I was about to put on my summers, I've been told we're about to experience a polar vortex, bringing temps back down to -8C or so
Sigh, just as I was about to put on my summers, I've been told we're about to experience a polar vortex, bringing temps back down to -8C or so
#457
VTEC just kicked in, yo!
Thread Starter
#458
Everyday I'm rofling
#459
Everyday I'm rofling
...and I keep forgetting what today is. Where's my edit button?
#460
ROTAREDOM
uhgggg our weather looks horrible for the next week... **sighhhhhhh**
#461
VTEC just kicked in, yo!
Thread Starter
Wow I'm dumb.
Here's today's report:
Arctic winds to blast Great Lakes, northeastern US this weekend
Here's today's report:
Arctic winds to blast Great Lakes, northeastern US this weekend
#463
ROTAREDOM
The following users liked this post:
xtcnrice (04-01-2016)
The following 2 users liked this post by xtcnrice:
MC MiYoung3269 (04-11-2016),
ssjoeboe9 (04-05-2016)
#465
ROTAREDOM
Ive seen this photo somewhere lol
The following users liked this post:
xtcnrice (04-05-2016)
#467
#468
ROTAREDOM
Hey... why haven't you cleared out your headlights yet??
What's the deal?
What's the deal?
#470
ROTAREDOM
#472
ROTAREDOM
Im coming to Toronto in 3 weeks. I could hand deliver them to you.
#473
Everyday I'm rofling
#474
VTEC just kicked in, yo!
Thread Starter
Hm last I checked the V3 Tritons were on back order..... but still, $170 USD? Kinda steep for LEDs no? I guess they are the best switchbacks. I sense a gotta-pay-to-play reply coming...
I also put them off ever since I knew about the bixenons... but let's face it, those things cost an arm and a leg.
I also put them off ever since I knew about the bixenons... but let's face it, those things cost an arm and a leg.
#475
ROTAREDOM
Yeah it's steep.. That's why I never bought them lol along with the fact that I already wired mine with the resistors, and didn't wanna go through the hassle of taking the bumper off again..
My bumper has a good 10mm gap to the headlights now because of how many times I hve taken that stupid thing off lol
My bumper has a good 10mm gap to the headlights now because of how many times I hve taken that stupid thing off lol
The following users liked this post:
xtcnrice (04-11-2016)
#477
ROTAREDOM
Not to thread jack, but this was my wife's CRV yesterday morning (Central Ohio)! I'm ready for the warmth!
The following users liked this post:
xtcnrice (04-11-2016)
The following users liked this post:
xtcnrice (04-11-2016)
#479
ROTAREDOM
I know it's weird... Also my CTE rear license frame on my tsx has the cut-outs for registration up top instead of the bottom, so you can only see half of the sticker.. Im sure I will get yelled at for that eventually..
#480
Hey all, in last December 2013 I decided to get myself a Bellanova White Pearl with the Tech package. It's now June and I finally decided to start a build thread!
Current mods:
I had a few complications along the way... the shop that did the redrilling screwed up the rebore on one of my wheels... so I had to use 3x 66.6 ->
64.1mm rings and one 74.1 -> 64.1mm ring. Had to buy 2 damn sets of hub rings . Anyway... I won't name any names, definitely was frustrating to say the least, having my wheels and tires in storage while I wait for damn rings to arrive. But in the mean time, I ordered my TEIN Street Basis .
I (tried to) installed the TEIN Street Basis myself, with the help of my awesome girlfriend hahah. It was taking way too long though, so my dad and eventually even my brother started helping me out. I actually needed all the help I could get with the rears... the stock shocks were so difficult to take out... but we eventually did it. The whole process took like 7 hours in total LOL.
Future mods:
I'm a total noob, so I don't have many photos that show progress of my car. So, I'll just start with photos of her as she is right now.
Front (not a very good picture )
Rear
Fender pics for VR1
Front driver side
Rear driver side (beadssss)
I know I need spacers for my rears... but I don't wanna roll my fenders either . Yeah I'm soft.... shh. Any recommendations for spacer size?
Special thanks to MC MiYoung for the China license plate LEDs , chris_cu2 for showcasing these wheels on his BWP with these specs, saucy for his awesome TEIN SS DIY which I used for installing my TEIN Street Basis, and to robpp for suspension torque specs
I'd also like to thank all the 2G guys on this forum for inspiring me on what to do (and what not to do hahah) with my ride. I was a little skeptical of my new ride at first... but this forum has really gotten me to love the look and feel of my ride.
Feel free to comment/criticize/etc. Thanks for looking! And sorry for so few pics check out my IG for a couple more haha
Current mods:
- TEIN Street Basis
- 18x9.5 +45 VMR V710 on 235/40/18 Hankook Ventus V12
- LED license plate lights
I had a few complications along the way... the shop that did the redrilling screwed up the rebore on one of my wheels... so I had to use 3x 66.6 ->
64.1mm rings and one 74.1 -> 64.1mm ring. Had to buy 2 damn sets of hub rings . Anyway... I won't name any names, definitely was frustrating to say the least, having my wheels and tires in storage while I wait for damn rings to arrive. But in the mean time, I ordered my TEIN Street Basis .
I (tried to) installed the TEIN Street Basis myself, with the help of my awesome girlfriend hahah. It was taking way too long though, so my dad and eventually even my brother started helping me out. I actually needed all the help I could get with the rears... the stock shocks were so difficult to take out... but we eventually did it. The whole process took like 7 hours in total LOL.
Future mods:
- 30% FormulaOne Pinnacle tint all around
- Plastidip fog covers
- Smoke vinyl the chrome trim and rear chrome bar
- Spacers for the rears (dunno what size!)
- OEM RL BBK??! (dunno what colour would look nice when refinished though)
I'm a total noob, so I don't have many photos that show progress of my car. So, I'll just start with photos of her as she is right now.
Front (not a very good picture )
Rear
Fender pics for VR1
Front driver side
Rear driver side (beadssss)
I know I need spacers for my rears... but I don't wanna roll my fenders either . Yeah I'm soft.... shh. Any recommendations for spacer size?
Special thanks to MC MiYoung for the China license plate LEDs , chris_cu2 for showcasing these wheels on his BWP with these specs, saucy for his awesome TEIN SS DIY which I used for installing my TEIN Street Basis, and to robpp for suspension torque specs
I'd also like to thank all the 2G guys on this forum for inspiring me on what to do (and what not to do hahah) with my ride. I was a little skeptical of my new ride at first... but this forum has really gotten me to love the look and feel of my ride.
Feel free to comment/criticize/etc. Thanks for looking! And sorry for so few pics check out my IG for a couple more haha
what diy mods did you do to the Tein basics ??