R20 Compatible Parts Thread
R20 Compatible Parts Thread
Okay guys well I figured I might make a thread for all the R20 SOHC guys.
A lot of r18 parts from the 2006-2012 civic will fit.
I want to start putting some lists together so you guys can see what is available for our cars. Keep in mind they are for sale for CIVICS a lot of the time, but I already have a few civic parts and they work perfect.
Anyone else feel free to post advice, questions, pictures, comments, whatever you want.
A lot of r18 parts from the 2006-2012 civic will fit.
I want to start putting some lists together so you guys can see what is available for our cars. Keep in mind they are for sale for CIVICS a lot of the time, but I already have a few civic parts and they work perfect.
Anyone else feel free to post advice, questions, pictures, comments, whatever you want.
Alright. First the reason I started this thread. Wanted to share this with some of you...
http://www.proimporttuners.com/parts...FUiGfgodvwoA9g

Weapons R header/downpipe.
This right here would be the same piping comparable to the RV6 downpipe for the 2.4 guys... Im not comparing quality here, just simply similar functioning pieces.
Good price for both pieces. It is built for the 2006-2011 civic r18 which is virtually the same engine as our r20.. just a little smaller.
http://www.proimporttuners.com/parts...FUiGfgodvwoA9g

Weapons R header/downpipe.
This right here would be the same piping comparable to the RV6 downpipe for the 2.4 guys... Im not comparing quality here, just simply similar functioning pieces.
Good price for both pieces. It is built for the 2006-2011 civic r18 which is virtually the same engine as our r20.. just a little smaller.
http://www.corsportusa.com/store/cat...FUiGfgodvwoA9g

Here you have a skunk2 full catback including the downpipe I have already replaced with a civic piece all the way back to the muffler.
Only issue is the rear exit of the muffler. That tip is way too big to fit.. but matched with a smaller axle back like say...
http://www.customcarscentral.com/tkd...FUOSfgod-RwAQg

A takeda axle back with extended exhaust hanger should clear the bumper just fine.

Here you have a skunk2 full catback including the downpipe I have already replaced with a civic piece all the way back to the muffler.
Only issue is the rear exit of the muffler. That tip is way too big to fit.. but matched with a smaller axle back like say...
http://www.customcarscentral.com/tkd...FUOSfgod-RwAQg

A takeda axle back with extended exhaust hanger should clear the bumper just fine.
Last edited by usdmJON; Feb 19, 2014 at 01:16 PM.
http://www.redline360.com/megan-raci...FUiGfgodvwoA9g

Here is a piece ive already got on my r20 ilx. It comes from the 2012 nonSI civic. Its the Megan Racing r18(now r20) downpipe.
http://www.autocityimports.com/20062...l-p-17445.html

They also have a catless header which would bolt up perfectly to that downpipe or a stock dp. I plan on picking this up after my next smog.
Thank you sir.

Here is a piece ive already got on my r20 ilx. It comes from the 2012 nonSI civic. Its the Megan Racing r18(now r20) downpipe.
http://www.autocityimports.com/20062...l-p-17445.html

They also have a catless header which would bolt up perfectly to that downpipe or a stock dp. I plan on picking this up after my next smog.
Thank you sir.
Thread
Thread Starter
Forum
Replies
Last Post
cycdaniel
1G TSX Performance Parts & Modifications
8
Dec 17, 2019 10:58 AM
Abe_Froman
Car Parts for Sale
1
Sep 16, 2015 01:27 PM






