Mazdazine eh? My 2nd car
Thread Starter
Joined: Jul 2007
Posts: 14,026
Likes: 349
From: Cypress, CA
Mazdazine eh? My 2nd car
Well, since my Genesis always seems to be away either getting parts tested or shows.. or other stuff..
I thought having a cheap 2nd car would be nice... might as well make it an enjoyable 2nd car
for $1.5k... this is what i picked up.. lol


'95 Mazda MX-5 Miata 5MT....
Why did I choose this? I've driven my friends 93 Miata for awhile since that was his 2nd car and it is a fun little car.. I've decided that having a 94+ with a 1.8 would be must over the 1.6..
hehe.
I thought having a cheap 2nd car would be nice... might as well make it an enjoyable 2nd car
for $1.5k... this is what i picked up.. lol


'95 Mazda MX-5 Miata 5MT....
Why did I choose this? I've driven my friends 93 Miata for awhile since that was his 2nd car and it is a fun little car.. I've decided that having a 94+ with a 1.8 would be must over the 1.6..
hehe.
Trending Topics
Thread Starter
Joined: Jul 2007
Posts: 14,026
Likes: 349
From: Cypress, CA
some exterior damage.. i had to pull out the passenger rear a little and a few dings.. front driver fender was dented in but i pulled it out too..

176k...
just use it as my daily... probably put on koni shocks and springs. i dunno.. im sure there will be more mods for it as time goes by. haha
yes. some body damage
they do really handle nice.. love it

176k...

just use it as my daily... probably put on koni shocks and springs. i dunno.. im sure there will be more mods for it as time goes by. haha
they do really handle nice.. love it
Last edited by jjashaa; Jul 13, 2011 at 02:05 AM.
2-$2.5k is about what they go for around here... they're usually sitting next to the old civics in used car lots...
if i found one for $1500 i would pick it up to keep miles off the accord
if i found one for $1500 i would pick it up to keep miles off the accord
Thread Starter
Joined: Jul 2007
Posts: 14,026
Likes: 349
From: Cypress, CA
Thread Starter
Joined: Jul 2007
Posts: 14,026
Likes: 349
From: Cypress, CA
haha.
anywho.. got my new tail lights today and put them on... nice to see a good working tail light.. and its been polished..
also did half atf half oil and then put in new 5w-30 with new filter.. valve lifter noises are gone.. all i need to do now is fix this idle issue...
when i come to a stop... it likes to rev up to 2k and holds it there for about 20-30 seconds.. and other random times...
anywho.. got my new tail lights today and put them on... nice to see a good working tail light.. and its been polished..

also did half atf half oil and then put in new 5w-30 with new filter.. valve lifter noises are gone.. all i need to do now is fix this idle issue...
when i come to a stop... it likes to rev up to 2k and holds it there for about 20-30 seconds.. and other random times...
Thread Starter
Joined: Jul 2007
Posts: 14,026
Likes: 349
From: Cypress, CA
just thought i give it a small little update...
changed out the intake manifold gasket and fuel injectors seals.. had a few more vacuum leaks so all that is fixed with a few bit of hoses.. everything runs fine now but... i wired up my universal o2 sensor wrong.. lmao fail..
since my friend came over to do his water pump + timing belt.. i decided to do my shifter rebuild...
BEFORE:

AFTER:

i'll hopefully do another smog this weekend after fixing the wires and get her tags.... finally.
changed out the intake manifold gasket and fuel injectors seals.. had a few more vacuum leaks so all that is fixed with a few bit of hoses.. everything runs fine now but... i wired up my universal o2 sensor wrong.. lmao fail..
since my friend came over to do his water pump + timing belt.. i decided to do my shifter rebuild...
BEFORE:

AFTER:

i'll hopefully do another smog this weekend after fixing the wires and get her tags.... finally.
Thread Starter
Joined: Jul 2007
Posts: 14,026
Likes: 349
From: Cypress, CA
lol thanks!
anywho, an update for anyone that follows...... lmao
replaced the head gasket and water pump with all the belts... that was fun.
replaced my dented up door with a nicely used one and same with the rear finish panel. (old one was cracked)
oh.. and the soft top.. changed that too. no more brown rear window.. lol..
anywho, an update for anyone that follows...... lmao
replaced the head gasket and water pump with all the belts... that was fun.
replaced my dented up door with a nicely used one and same with the rear finish panel. (old one was cracked)

oh.. and the soft top.. changed that too. no more brown rear window.. lol..
Thread Starter
Joined: Jul 2007
Posts: 14,026
Likes: 349
From: Cypress, CA
hmm.. i should take some pictures of the parts i buy... or something.. lol
got my header put in with my test pipe.. also picked up some NB Koni yellows with racing beats on NB top hats for $350.. got the fronts put in.. i'll put the rest in tomorrow.. hehe
got my header put in with my test pipe.. also picked up some NB Koni yellows with racing beats on NB top hats for $350.. got the fronts put in.. i'll put the rest in tomorrow.. hehe










btw.

We've seen what you do to your cars... 

the stock Miata shifter is amazing as is, I haven't met anyone yet with an aftermarket one. Have fun!
Really? It's an '03 Accord not a NSX. Drive your car dude; it's one of the most practical cars ever made and you're worried about "keeping the miles off it?"