Another JiffyLube Nightmare ..
Three Wheelin'
Joined: May 2017
Posts: 1,315
Likes: 430
From: Right Here
Not in my case. I built it right. It is solid with a nice reinforced concrete base, etc.
My neighbour's pre-fab shed is a perfect example. He wanted to borrow the electric planer to shave down the door edge. The problem is the idiots installed a door frame without shimming the 1/2 inch gap to the 2x4 stud. They just stuck some screws through the door frame, through the 1/2 inch gap and into the 2x4 stud. Winner of a move.
Pre-fab means you are doing the same thing over and over again (called precision) as you stated, but not necessarily accurate though.
My neighbour's pre-fab shed is a perfect example. He wanted to borrow the electric planer to shave down the door edge. The problem is the idiots installed a door frame without shimming the 1/2 inch gap to the 2x4 stud. They just stuck some screws through the door frame, through the 1/2 inch gap and into the 2x4 stud. Winner of a move.
Pre-fab means you are doing the same thing over and over again (called precision) as you stated, but not necessarily accurate though.
Ex-OEM King
Joined: Dec 2013
Posts: 17,902
Likes: 7,036
From: Minnesnowta
Not in my case. I built it right. It is solid with a nice reinforced concrete base, etc.
My neighbour's pre-fab shed is a perfect example. He wanted to borrow the electric planer to shave down the door edge. The problem is the idiots installed a door frame without shimming the 1/2 inch gap to the 2x4 stud. They just stuck some screws through the door frame, through the 1/2 inch gap and into the 2x4 stud. Winner of a move.
Pre-fab means you are doing the same thing over and over again (called precision) as you stated, but not necessarily accurate though.
My neighbour's pre-fab shed is a perfect example. He wanted to borrow the electric planer to shave down the door edge. The problem is the idiots installed a door frame without shimming the 1/2 inch gap to the 2x4 stud. They just stuck some screws through the door frame, through the 1/2 inch gap and into the 2x4 stud. Winner of a move.
Pre-fab means you are doing the same thing over and over again (called precision) as you stated, but not necessarily accurate though.
Thread
Thread Starter
Forum
Replies
Last Post
MedX172
5G TLX (2015-2020)
21
Nov 1, 2014 02:24 PM
