An amazing Sunday afternoon for pictures...................
#163
Moderator
iTrader: (3)
#165
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
I'm in....
#166
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 37
Posts: 43,475
Received 3,661 Likes
on
2,494 Posts
I hate to say it but between my dads pictures from yesterday and a buddy of mine stopping my this morning to take a look the general consensus right now is that the entire blower will need to be replaced.
Here are some pics of various pieces of damage as well as first shots outside of the car since the accident. All these pics are of damage that couldn't be seen before due to the radiator support and radiator being pushed in so far.
These three pictures show the damage of the bypass valve of the supercharger. The valve body has been destroyed but also the shaft that connects it to the inlet valve is also bent. That shaft is the part we believe is not replaceable. Will not know for sure though till we can contact CT-Engineering at noon EST.
I was already aware these hoses were cut on the top ends and figured they were probably mangled at the bottom as well. I already have purchased a replacement set.
Small tear in hose that connects to supercharger.
Will need a new front wiring harness.
They are pretty certain that the engine did not suffer any damage and that it wasn't pushed back permanently at all either.
A couple dirty pictures of it outside.
Here are some pics of various pieces of damage as well as first shots outside of the car since the accident. All these pics are of damage that couldn't be seen before due to the radiator support and radiator being pushed in so far.
These three pictures show the damage of the bypass valve of the supercharger. The valve body has been destroyed but also the shaft that connects it to the inlet valve is also bent. That shaft is the part we believe is not replaceable. Will not know for sure though till we can contact CT-Engineering at noon EST.
I was already aware these hoses were cut on the top ends and figured they were probably mangled at the bottom as well. I already have purchased a replacement set.
Small tear in hose that connects to supercharger.
Will need a new front wiring harness.
They are pretty certain that the engine did not suffer any damage and that it wasn't pushed back permanently at all either.
A couple dirty pictures of it outside.
#167
Chapter Leader
(Northeast Florida)
(Northeast Florida)
iTrader: (1)
I hate to say it but between my dads pictures from yesterday and a buddy of mine stopping my this morning to take a look the general consensus right now is that the entire blower will need to be replaced.
Here are some pics of various pieces of damage as well as first shots outside of the car since the accident. All these pics are of damage that couldn't be seen before due to the radiator support and radiator being pushed in so far.
These three pictures show the damage of the bypass valve of the supercharger. The valve body has been destroyed but also the shaft that connects it to the inlet valve is also bent. That shaft is the part we believe is not replaceable. Will not know for sure though till we can contact CT-Engineering at noon EST.
I was already aware these hoses were cut on the top ends and figured they were probably mangled at the bottom as well. I already have purchased a replacement set.
Small tear in hose that connects to supercharger.
Will need a new front wiring harness.
They are pretty certain that the engine did not suffer any damage and that it wasn't pushed back permanently at all either.
A couple dirty pictures of it outside.
]
Here are some pics of various pieces of damage as well as first shots outside of the car since the accident. All these pics are of damage that couldn't be seen before due to the radiator support and radiator being pushed in so far.
These three pictures show the damage of the bypass valve of the supercharger. The valve body has been destroyed but also the shaft that connects it to the inlet valve is also bent. That shaft is the part we believe is not replaceable. Will not know for sure though till we can contact CT-Engineering at noon EST.
I was already aware these hoses were cut on the top ends and figured they were probably mangled at the bottom as well. I already have purchased a replacement set.
Small tear in hose that connects to supercharger.
Will need a new front wiring harness.
They are pretty certain that the engine did not suffer any damage and that it wasn't pushed back permanently at all either.
A couple dirty pictures of it outside.
]
Last edited by gatrhumpy; 03-13-2012 at 08:53 AM.
#168
Moderator
iTrader: (3)
Sorry to see Jason. Good luck contacting CT-E and seeing what they say.
#169
tehLEGOman
Join Date: Dec 2004
Location: Charlotte, NC
Age: 41
Posts: 9,135
Received 1,982 Likes
on
1,335 Posts
NFG = Not Fucking Good.
#170
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 37
Posts: 43,475
Received 3,661 Likes
on
2,494 Posts
Found out that the charger can be repaired. I will be shipping it to the company that makes the blower that way they can bench test it and make sure nothing else is wrong.
Also the body shop got the ok for some more stuff from insurance and so they were ready to start working on the car. My dad dropped off all the parts so the body repair is underway.
Also the body shop got the ok for some more stuff from insurance and so they were ready to start working on the car. My dad dropped off all the parts so the body repair is underway.
#171
Whats up with RDX owners?
iTrader: (9)
#172
Chapter Leader (Southern Region)
#173
Moderator
iTrader: (3)
#177
Senior Moderator
The following users liked this post:
CLtotheTL32 (03-18-2012)
#180
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 37
Posts: 43,475
Received 3,661 Likes
on
2,494 Posts
that is awesome
#181
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 37
Posts: 43,475
Received 3,661 Likes
on
2,494 Posts
#182
Moderator
iTrader: (3)
Don't make me copy the pictures from Facebook
#183
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 37
Posts: 43,475
Received 3,661 Likes
on
2,494 Posts
Damn I was seriously tired last night and posted that in the wrong thread. Been trying to get pics today but still raining outside.
#184
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 37
Posts: 43,475
Received 3,661 Likes
on
2,494 Posts
Just made payment another batch of parts for the TSX upgrades taking place during this rebuild. They should ship out today or tomorrow. Now I just have to put together the list of parts needed for the engine upgrades and get them ordered and I should have all the upgrade parts ordered except 1 then which I am not sure if I will buy prebuilt or have made custom.
#185
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 37
Posts: 43,475
Received 3,661 Likes
on
2,494 Posts
Update:
Car was dropped at my favorite body shop on Monday March 5th as they have done excellent work for me in the past and normally on time. Originally was supposed to be done Thursday April 5th or Friday April 6th. Called them up during that time and they said it was not done but it would be done the following Friday April 13th. Well that day came and I heard nothing from them. Called today to get an update. "Oh it should be done by this Friday".
I will not give out the name because they still do excellent work regardless and I do not want my car half assed to finish. However, they knew the situation that it was supposed to go to the engine shop on Friday April 6th which is why it needed to be done by the 5th. The engine shop had cleared their schedule for 2 weeks straight just to work on my car. I had planned this all with them about a month before the car was dropped off. I supplied them with all needed parts except those that they needed to get from Acura. The worst part is they were only doing the underlying work to the car and zero body work as the car is to go back to them for that after the engine work is done.
I will not give out the name because they still do excellent work regardless and I do not want my car half assed to finish. However, they knew the situation that it was supposed to go to the engine shop on Friday April 6th which is why it needed to be done by the 5th. The engine shop had cleared their schedule for 2 weeks straight just to work on my car. I had planned this all with them about a month before the car was dropped off. I supplied them with all needed parts except those that they needed to get from Acura. The worst part is they were only doing the underlying work to the car and zero body work as the car is to go back to them for that after the engine work is done.
#186
Moderator
iTrader: (3)
The following users liked this post:
v6cord2k5 (04-17-2012)
#187
Your Friendly Canadian
Join Date: Dec 2007
Location: Toronto, Ontario
Age: 31
Posts: 17,428
Received 1,484 Likes
on
1,048 Posts
#189
Whats up with RDX owners?
iTrader: (9)
#190
Chapter Leader (Southern Region)
#191
Whats up with RDX owners?
iTrader: (9)
^ I knew that was coming from someone.
ITT: and more
ITT: and more
#192
Senior Moderator
#194
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
#195
Your Friendly Canadian
Join Date: Dec 2007
Location: Toronto, Ontario
Age: 31
Posts: 17,428
Received 1,484 Likes
on
1,048 Posts
#197
Chapter Leader (Southern Region)
#198
tehLEGOman
Join Date: Dec 2004
Location: Charlotte, NC
Age: 41
Posts: 9,135
Received 1,982 Likes
on
1,335 Posts
#200
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Thread Starter
Join Date: Dec 2003
Location: Mooresville, NC
Age: 37
Posts: 43,475
Received 3,661 Likes
on
2,494 Posts
My dad and buddy are picking up the car right now as we speak and taking it to the next shop. Unfortunately since it missed its scheduled time at that shop I do not know when it will even begin to be worked on.