View Poll Results: please choose one.
Concept A
87
59.18%
Concept B
35
23.81%
Concept C
13
8.84%
None of the above, keep working on it.
12
8.16%
Voters: 147. You may not vote on this poll
4G TL RonJon 6-piece Splitter kit ** updated design, pg. 3 **
#162
The Sicilian
I think those would discolor and chip from road debris over time.
#163
Drifting
I ned to make a few measurements and a take a look at the car's front and side bumpers in person. I might have some help from an experienced fabricator to build the prototype out of foam and clay in NY then send out the prototype to CA for the mold building.
I just need a local with a 4G TL to mock up a design out of foam. Consider it a mini meet. I'll bring the beer and sandwiches or pizza!!
I just need a local with a 4G TL to mock up a design out of foam. Consider it a mini meet. I'll bring the beer and sandwiches or pizza!!
for my front lip im using clay right now over the fiberglass to give it more details.
nice job !
#166
Racer
Join Date: Sep 2009
Location: Oak Forest, IL
Age: 35
Posts: 349
Likes: 0
Received 5 Likes
on
5 Posts
Concept 2, but I'm having mixed emotions about the fin on the skirt. I hope its not too big.
I also hope the lip kit doesnt stick too much making the OEM wheels look tucked too far in the wheel well. I dont know how to explain it.
I also hope the lip kit doesnt stick too much making the OEM wheels look tucked too far in the wheel well. I dont know how to explain it.
#167
I know exactly what you mean, if you put a flat piece of wood across the side of the fins, the wheel shouldn't be too far from the wood. But it will be more like an accent than a real feature. The angle will be highlighted by a crisp crease, to exaggerate while the actual proportions will be minor.
#169
The Sicilian
#172
Yeah, have been working on this non stop, this and the TSX splitter kit. So Concept 2 is the one, and we will be taking the next step, Now I'm debating ABS plastic or Poly-urethane, with the later the heavy favorite. prepainted option is available as it is with out other kits, but depending on your color, I would be able to suggest it or not.
I am very excited to make this kit, and I hope we can sell enough of them to consider it a hit!
I am very excited to make this kit, and I hope we can sell enough of them to consider it a hit!
#177
Back From The dead
When?
#180
Come on Ron...
Concept 1 is better...look like an cool one of a kind aftermarket kit more & more more sporty~
The kit of Concept 2 really looks like a Civic body kit........
Concept 1 is better...look like an cool one of a kind aftermarket kit more & more more sporty~
The kit of Concept 2 really looks like a Civic body kit........
#182
We will be making Concept A first and taking pics, then turn it into concept b and see if it works better. This is something I have to see in person to make sure it looks the best. We have two lead guys ready to offer their car for the measuring session, I just have to get the bumpers from Acura and we start!
#183
Full of water...
really liking concept 2, and i personally like the fins. this car would benefit from some more flair at the bottom for sure. it my fav part of the 3G aspec kit and this car would look great with a little more weight down low. cant wait to see what comes of this.
#184
This is going to be the rear 2 piece lip to cover the hack job Acura makes you do to the bumper. Also, I think we will lay off the fins in the front and side /front. Only the rear and side / rear will have the fins. The front and side / front will flow into each other with a verrrry subtle flare at the bottom.
#187
Your Friendly Canadian
Join Date: Dec 2007
Location: Toronto, Ontario
Age: 32
Posts: 17,433
Received 1,492 Likes
on
1,050 Posts
I like the fin, but what are you going to do to make sure it can withstand abuse (back seat entry and exit, road debris, etc.)
#188
#192
2010 TL AWD 6MT: New King
This is going to be the rear 2 piece lip to cover the hack job Acura makes you do to the bumper. Also, I think we will lay off the fins in the front and side /front. Only the rear and side / rear will have the fins. The front and side / front will flow into each other with a verrrry subtle flare at the bottom.
Very nice, classy, and aggressive. I like the rear; from this angle, the kit seems to even out the rear bumper's bulbous "squat." Would you happen to have another angle of the rear by chance (ie. direct rear view)?
#193
Drifting
A "hint" of a fin on the front might help the flow from front to rear.
#196
an adult perspective
#197
Don't worry, there will be the same amount of room as stock.
Oh, btw, I'm pitching this project to Honda Tuning Magazine for them to possibly do a feature on the development of the kit lie they did on the TL kit for the 3rd Gen, buit to actually capture the process from start to production.:
http://www.hondatuningmagazine.com/t...kit/index.html
Fingers crossed!!
Oh, btw, I'm pitching this project to Honda Tuning Magazine for them to possibly do a feature on the development of the kit lie they did on the TL kit for the 3rd Gen, buit to actually capture the process from start to production.:
http://www.hondatuningmagazine.com/t...kit/index.html
Fingers crossed!!
#198
Drifting
Don't worry, there will be the same amount of room as stock.
Oh, btw, I'm pitching this project to Honda Tuning Magazine for them to possibly do a feature on the development of the kit lie they did on the TL kit for the 3rd Gen, buit to actually capture the process from start to production.:
http://www.hondatuningmagazine.com/t...kit/index.html
Fingers crossed!!
Oh, btw, I'm pitching this project to Honda Tuning Magazine for them to possibly do a feature on the development of the kit lie they did on the TL kit for the 3rd Gen, buit to actually capture the process from start to production.:
http://www.hondatuningmagazine.com/t...kit/index.html
Fingers crossed!!
#200
Drifting