View Poll Results: please choose one.
Concept A
87
59.18%
Concept B
35
23.81%
Concept C
13
8.84%
None of the above, keep working on it.
12
8.16%
Voters: 147. You may not vote on this poll
4G TL RonJon 6-piece Splitter kit ** updated design, pg. 3 **
#41
an adult perspective
I'm feeling "A" myself ... captures the "quirky" lines of the rest of the car, especially as captured by the grill. "B" has too much of an ice scraper appearance to it, and "C" is just to blocky, and doesn't seem to flow with the rest of the lines of the car.
#42
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
rondy lemme tell u something....
your a motherfucking genius man !!!! honestly....dont get me wrong 4G TLer's, as much as i love the interior of the 4G TL....i hate the happy feet look on the car....the big grin upfront is such a turn off of unimaginable magnitude !!!!
rondy if you make this car look sexy, i might just buy this car.....i think you did a great job of eliminating the front "grin" grill....and adding aggressive look by adding body kit (body kit A looks the most aggressive)....not really feeling the rear but i bet you will make that look great as well....
also any plans of doing something to the rear piece of plastic thats smiling it way to glory ???
your a motherfucking genius man !!!! honestly....dont get me wrong 4G TLer's, as much as i love the interior of the 4G TL....i hate the happy feet look on the car....the big grin upfront is such a turn off of unimaginable magnitude !!!!
rondy if you make this car look sexy, i might just buy this car.....i think you did a great job of eliminating the front "grin" grill....and adding aggressive look by adding body kit (body kit A looks the most aggressive)....not really feeling the rear but i bet you will make that look great as well....
also any plans of doing something to the rear piece of plastic thats smiling it way to glory ???
#45
Grandpa
Join Date: Dec 2003
Location: Virginia, Besieged
Age: 68
Posts: 7,596
Received 2,609 Likes
on
1,475 Posts
Here is a head on view showing the Acura front spoiler.
It shows the deep cutout that I mentioned, and you can see the OEM spoiler (air guide, really) under the nose of the car, inboard.
If you go out and look at your own cars carefully, you can only suppose that it's guiding air in a way that interacts with the dissipator and the plastic panels covering the motor.
I'm only showing this because I'd suggest that any aftermarket kit emulate the factory cutout unless the manufacturer has the engineering wherewithal to be sure that a new design improves how this works instead of detracting from how this works.
It shows the deep cutout that I mentioned, and you can see the OEM spoiler (air guide, really) under the nose of the car, inboard.
If you go out and look at your own cars carefully, you can only suppose that it's guiding air in a way that interacts with the dissipator and the plastic panels covering the motor.
I'm only showing this because I'd suggest that any aftermarket kit emulate the factory cutout unless the manufacturer has the engineering wherewithal to be sure that a new design improves how this works instead of detracting from how this works.
#46
The TL is only one car, there are many other similar cars with comepletely different front end lips.
I'll venture to say the cutout on this TL kit is to avoid scrapage rather than funnel air as a primary reason, and even so, this is not F1 Racing, this is a daily driver, the overall shape of the car will be more of value to aerodynamics than one piece in the front. On top of that, we won't be making a crazy design for the front, it will be aerodynamic.
I'll venture to say the cutout on this TL kit is to avoid scrapage rather than funnel air as a primary reason, and even so, this is not F1 Racing, this is a daily driver, the overall shape of the car will be more of value to aerodynamics than one piece in the front. On top of that, we won't be making a crazy design for the front, it will be aerodynamic.
#47
Grandpa
Join Date: Dec 2003
Location: Virginia, Besieged
Age: 68
Posts: 7,596
Received 2,609 Likes
on
1,475 Posts
Well, you'll certainly know more about it than I would. :-)
It's just such an obvious thing that I was motivated to persist.
It's just such an obvious thing that I was motivated to persist.
#52
I like it better than the original C concept. The front lip looks alot better. But I'm not real keen on the side skirt, mainly the front section angle. Although I like the back section angle as it seems to flow with the existing lines.
Have to admit I'm still partial to design A, but this new concept is a close second to B, my second choice.
All in all, some nice design work though!
Have to admit I'm still partial to design A, but this new concept is a close second to B, my second choice.
All in all, some nice design work though!
#54
I like this second design of C. Truth be told, I'm going to like any lip kit design because I like the variety. I hope that RonJon continues to represent with designs like this!
#56
New concept C looks better than the old concept C, but I don't like the side of the front lip...looks really alike the stock lip....
New side skirt are...ok. Maybe will look good mix with Concept A.
I still like the CONCEPT A design way more.
New side skirt are...ok. Maybe will look good mix with Concept A.
I still like the CONCEPT A design way more.
#58
Only the Concept A don't have the RJ grille install...this is not fair...(although Concept A still won all the votes...haha)
So maybe put a RJ grille to the Concept A will get all the votes~lol
So maybe put a RJ grille to the Concept A will get all the votes~lol
#59
Suzuka Master
I voted None, only becasue I don't like C sides, and A and B seem to add even more dramatic edges in the front lip to a car that I feel already has too many disjointed edges to begine with.
#60
Grandpa
Join Date: Dec 2003
Location: Virginia, Besieged
Age: 68
Posts: 7,596
Received 2,609 Likes
on
1,475 Posts
:-)
#61
Grandpa
Join Date: Dec 2003
Location: Virginia, Besieged
Age: 68
Posts: 7,596
Received 2,609 Likes
on
1,475 Posts
At the front it looks like you took a hint from the OEM design, and then added a deeper cut at the sides that might have the overall effect of producing the same kind of aim that those aerofoil wings have that we're not allowed to put on the front of our Honda Challenge cars.
I think that this complements the car a little better than the other front spoiler designs, but there's still something wrong at the centre of it.
I swear, I think that if I were you, I would consider investigating whether I'd get away with directly reproducing the OEM front spoiler, with the exception perhaps of keeping the deeper cuts you've put just outboard of the fog lights.
As somebody else has already said about the new side pieces, the part at the front edge of the front door is just a bit odd. If it's being produced in a way to emulate the effect of the front splash guards, maybe that makes sense but perhaps it should flow more smoothly into the rest of the side piece so that a user who's already wondering about the unconventional lines of the 4G TL won't be put further off by this unusual design.
I dunno...it's a gamble whether you'd sell more of them to people who are out to have an unusual looking car, or sell fewer of them to people who don't want their cars to look any more unusual than they already do.
But what the hell do I know. :-)
I think that this complements the car a little better than the other front spoiler designs, but there's still something wrong at the centre of it.
I swear, I think that if I were you, I would consider investigating whether I'd get away with directly reproducing the OEM front spoiler, with the exception perhaps of keeping the deeper cuts you've put just outboard of the fog lights.
As somebody else has already said about the new side pieces, the part at the front edge of the front door is just a bit odd. If it's being produced in a way to emulate the effect of the front splash guards, maybe that makes sense but perhaps it should flow more smoothly into the rest of the side piece so that a user who's already wondering about the unconventional lines of the 4G TL won't be put further off by this unusual design.
I dunno...it's a gamble whether you'd sell more of them to people who are out to have an unusual looking car, or sell fewer of them to people who don't want their cars to look any more unusual than they already do.
But what the hell do I know. :-)
#62
Suzuka Master
I know. This car just lacks a flowing design so adding adges to an already edgy car IMO makes it way complicated looking. I know Acura did this by design, and I am the last person to ask abotu styling and lips on this car as I bought this AWD 4G 90% for how it rides and handles, 9% for the sound system and maybe 1% for it's looks. I love driving this car, still does nto impress me looking at it, especially liek my 3G Type-S did. I do think the RJ grill makes a huge differnce in the look of the car.
#64
I'll answer this for Ron if he doesn't mind...
Although a lip kit will physically bring the edges of your car closer to the ground, that's not the point of lowering springs/coilovers.
Their purpose is to elimintate ugly wheel gap between the visible edge of the tire and the visible edge of the fender. The more compact look it has, generally, the smoother, sleeker, sexier look it gives off. Most people wouldn't sacrifice getting their ride lower to the ground while still having huge wheel gaps because they'd scrape it for nothing, haha!
Although a lip kit will physically bring the edges of your car closer to the ground, that's not the point of lowering springs/coilovers.
Their purpose is to elimintate ugly wheel gap between the visible edge of the tire and the visible edge of the fender. The more compact look it has, generally, the smoother, sleeker, sexier look it gives off. Most people wouldn't sacrifice getting their ride lower to the ground while still having huge wheel gaps because they'd scrape it for nothing, haha!
#65
Full of water...
i like the best! i would vote, but i am not in the market so no need. but i think this is the best one of the lot. i still feel like the sides need to do something different. not exactly like the 3G sides, but i want to say they need something that makes them look "wider" or more flared or something...the wheels look hot on it though.
#67
Connoisseur of Aesthetics
Join Date: Jan 2009
Location: Gaithersburg, MD
Age: 38
Posts: 345
Likes: 0
Received 1 Like
on
1 Post
I'll answer this for Ron if he doesn't mind...
Although a lip kit will physically bring the edges of your car closer to the ground, that's not the point of lowering springs/coilovers.
Their purpose is to elimintate ugly wheel gap between the visible edge of the tire and the visible edge of the fender. The more compact look it has, generally, the smoother, sleeker, sexier look it gives off. Most people wouldn't sacrifice getting their ride lower to the ground while still having huge wheel gaps because they'd scrape it for nothing, haha!
Although a lip kit will physically bring the edges of your car closer to the ground, that's not the point of lowering springs/coilovers.
Their purpose is to elimintate ugly wheel gap between the visible edge of the tire and the visible edge of the fender. The more compact look it has, generally, the smoother, sleeker, sexier look it gives off. Most people wouldn't sacrifice getting their ride lower to the ground while still having huge wheel gaps because they'd scrape it for nothing, haha!
#68
Short answer: In the real world with real world driving in regular traffic, the answer is that coilovers or lowering your car does not give the average person any noticable performance gain.
Long answer: But if you use the coilovers to their true potential and take turns way above the speedlimits (I'm talking more than double the speedlimit) or if you track the car on the weekends, you will probably find a performance benefit. The benefit is that the car will usually have must flatter cornering characteristics. Take the wheel off of a stock spring/damper setup and observe the spring. You'll notice that the spring is narrow and more tightly wound around the ends but the middle get further apart and wider. This is called a progressive spring. It gives the car the ability to absorb holes in the rode that would normally jolt the car around. However, around quick corners, the progressive spring fails because it compresses only a certain amount so much before compressing to the point where it's hard to predict movement.
A linear spring, like those on coilovers, have a spring rate that is more consistent, but do not absorb small bumps as easily because they have the same absorbtion rates for every bump, big or small. You're going to feel every bump according to how large it is. Cornering is very easy to judge and you'll never turn in and then halfway through, the nose of the car and/or rear wheels won't start to break away or bob the car in an unpredictable way.
Another small characteristic of lowering a car is to lower the entire body closer to the ground for decreased wind resistance, which would help fuel mileage. Take a look at NASCAR cars and ones that go to the bonneville salt flats, they have a lowered suspension and air dams in the front for reasons of cutting down on wind resistance of everything on the underbody including the tires which are the most underappreciated factors concerning a cars wind resistance. In another post I described how wind resistance helped my car achieve mileage fluctions of 29mpg with the wind and 23mpg against the win. Both going the same speed and both going on the same highway.
Long answer: But if you use the coilovers to their true potential and take turns way above the speedlimits (I'm talking more than double the speedlimit) or if you track the car on the weekends, you will probably find a performance benefit. The benefit is that the car will usually have must flatter cornering characteristics. Take the wheel off of a stock spring/damper setup and observe the spring. You'll notice that the spring is narrow and more tightly wound around the ends but the middle get further apart and wider. This is called a progressive spring. It gives the car the ability to absorb holes in the rode that would normally jolt the car around. However, around quick corners, the progressive spring fails because it compresses only a certain amount so much before compressing to the point where it's hard to predict movement.
A linear spring, like those on coilovers, have a spring rate that is more consistent, but do not absorb small bumps as easily because they have the same absorbtion rates for every bump, big or small. You're going to feel every bump according to how large it is. Cornering is very easy to judge and you'll never turn in and then halfway through, the nose of the car and/or rear wheels won't start to break away or bob the car in an unpredictable way.
Another small characteristic of lowering a car is to lower the entire body closer to the ground for decreased wind resistance, which would help fuel mileage. Take a look at NASCAR cars and ones that go to the bonneville salt flats, they have a lowered suspension and air dams in the front for reasons of cutting down on wind resistance of everything on the underbody including the tires which are the most underappreciated factors concerning a cars wind resistance. In another post I described how wind resistance helped my car achieve mileage fluctions of 29mpg with the wind and 23mpg against the win. Both going the same speed and both going on the same highway.
#69
Grandpa
Join Date: Dec 2003
Location: Virginia, Besieged
Age: 68
Posts: 7,596
Received 2,609 Likes
on
1,475 Posts
#70
I'm on a work computer right now, so I can't view these images, but yet I believe I know what they are showing. This should give you a very good impression of what a "stock" spring and damper looks like over what a coilover looks like. Although it is an EVO X, it still applies to what ours generally looks like.
Before:
After:
Before:
After:
Before:
After:
Before:
After:
Before:
After:
Am I thread jacking?
Before:
After:
Before:
After:
Before:
After:
Before:
After:
Before:
After:
Am I thread jacking?
#74
Connoisseur of Aesthetics
Join Date: Jan 2009
Location: Gaithersburg, MD
Age: 38
Posts: 345
Likes: 0
Received 1 Like
on
1 Post
Short answer: In the real world with real world driving in regular traffic, the answer is that coilovers or lowering your car does not give the average person any noticable performance gain.
Long answer: But if you use the coilovers to their true potential and take turns way above the speedlimits (I'm talking more than double the speedlimit) or if you track the car on the weekends, you will probably find a performance benefit. The benefit is that the car will usually have must flatter cornering characteristics. Take the wheel off of a stock spring/damper setup and observe the spring. You'll notice that the spring is narrow and more tightly wound around the ends but the middle get further apart and wider. This is called a progressive spring. It gives the car the ability to absorb holes in the rode that would normally jolt the car around. However, around quick corners, the progressive spring fails because it compresses only a certain amount so much before compressing to the point where it's hard to predict movement.
A linear spring, like those on coilovers, have a spring rate that is more consistent, but do not absorb small bumps as easily because they have the same absorbtion rates for every bump, big or small. You're going to feel every bump according to how large it is. Cornering is very easy to judge and you'll never turn in and then halfway through, the nose of the car and/or rear wheels won't start to break away or bob the car in an unpredictable way.
Another small characteristic of lowering a car is to lower the entire body closer to the ground for decreased wind resistance, which would help fuel mileage. Take a look at NASCAR cars and ones that go to the bonneville salt flats, they have a lowered suspension and air dams in the front for reasons of cutting down on wind resistance of everything on the underbody including the tires which are the most underappreciated factors concerning a cars wind resistance. In another post I described how wind resistance helped my car achieve mileage fluctions of 29mpg with the wind and 23mpg against the win. Both going the same speed and both going on the same highway.
Long answer: But if you use the coilovers to their true potential and take turns way above the speedlimits (I'm talking more than double the speedlimit) or if you track the car on the weekends, you will probably find a performance benefit. The benefit is that the car will usually have must flatter cornering characteristics. Take the wheel off of a stock spring/damper setup and observe the spring. You'll notice that the spring is narrow and more tightly wound around the ends but the middle get further apart and wider. This is called a progressive spring. It gives the car the ability to absorb holes in the rode that would normally jolt the car around. However, around quick corners, the progressive spring fails because it compresses only a certain amount so much before compressing to the point where it's hard to predict movement.
A linear spring, like those on coilovers, have a spring rate that is more consistent, but do not absorb small bumps as easily because they have the same absorbtion rates for every bump, big or small. You're going to feel every bump according to how large it is. Cornering is very easy to judge and you'll never turn in and then halfway through, the nose of the car and/or rear wheels won't start to break away or bob the car in an unpredictable way.
Another small characteristic of lowering a car is to lower the entire body closer to the ground for decreased wind resistance, which would help fuel mileage. Take a look at NASCAR cars and ones that go to the bonneville salt flats, they have a lowered suspension and air dams in the front for reasons of cutting down on wind resistance of everything on the underbody including the tires which are the most underappreciated factors concerning a cars wind resistance. In another post I described how wind resistance helped my car achieve mileage fluctions of 29mpg with the wind and 23mpg against the win. Both going the same speed and both going on the same highway.
#75
Ron,
While C2 is a great improvement over the original, you have to ask yourself what your target audience would want.
IMO, I'd rather spend money on a nice kit I can keep for the life of the vehicle and something I won't get tired of. While the C version looks hot to start, it will cool down just as fast due to the complex angles and lines that do not flow well with the original characteristics of the vehicle. After all, a lip kit should accentuate the original vehicle, not make it something it is not.
The rear side on version C is similar to the 3g rear that I'd rather not see repeated. I'd classify both C versions as borderline ricey. Rice gets old fast.
A or B variants are your best bet for a clean, timeless look.
While C2 is a great improvement over the original, you have to ask yourself what your target audience would want.
IMO, I'd rather spend money on a nice kit I can keep for the life of the vehicle and something I won't get tired of. While the C version looks hot to start, it will cool down just as fast due to the complex angles and lines that do not flow well with the original characteristics of the vehicle. After all, a lip kit should accentuate the original vehicle, not make it something it is not.
The rear side on version C is similar to the 3g rear that I'd rather not see repeated. I'd classify both C versions as borderline ricey. Rice gets old fast.
A or B variants are your best bet for a clean, timeless look.
#76
[IMG]file:///C:/Users/DUKELA%7E1/AppData/Local/Temp/moz-screenshot.png[/IMG]I also think A looks best. But, imo, i think it would look even better if the middle of the front lip didn't have that additional piece sticking up (the flap)
#79
The Sicilian
A-has my vote for sure.
B-looks like there is a dust pan in front of the car.
C-looks way to thick and boxy.Can you say battering ram!!
C2-looks better, but the side skirts are still too thick
I would still keep working on it though. Some very good concepts.
B-looks like there is a dust pan in front of the car.
C-looks way to thick and boxy.Can you say battering ram!!
C2-looks better, but the side skirts are still too thick
I would still keep working on it though. Some very good concepts.