Purchasing lugs
#42
Three Wheelin'
iTrader: (6)
i'm going to grab a set mcgard spline drive lugs, they're guaranteed not to peel, rust, or chip. you can find them here: http://store.summitracing.com/egnsearch.asp?N=400067
#45
the only thing with those muteki sr35's is that they are pretty tiny compared to some other types. the blue closed ended ones would look hot with the right wheels though.
#56
Hey guys newb question here... are getting 'brand' lugs that important? Or are you guys just discussing the look of them? I mean does spending money on more expensive lugs have any functional advantages (other than keeping the wheel on)? I got a set of RJ lugs with my last set of rims, but now that I have some newer shoes should I buy new lugs?
#58
My Garage not
iTrader: (2)
Join Date: Jun 2006
Location: Westsiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiide
Posts: 2,121
Likes: 0
Received 4 Likes
on
1 Post
gatdammit, i usually change my lugs when i change wheels to make sure i have the right seat type. i think the stock acura rims and also ronjons are ball seat and pretty much most aftermarket are cone seat.
$35-$75 motegi/gorilla/mcguard lugs work just as well as $150 project kics but the kics are gonna have a nicer finish and are going to be lighter. i think the rotational weight u would save isn't worth it because you'd be better off getting some lightweight wheels instead.
$35-$75 motegi/gorilla/mcguard lugs work just as well as $150 project kics but the kics are gonna have a nicer finish and are going to be lighter. i think the rotational weight u would save isn't worth it because you'd be better off getting some lightweight wheels instead.
#60
My Garage not
iTrader: (2)
Join Date: Jun 2006
Location: Westsiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiide
Posts: 2,121
Likes: 0
Received 4 Likes
on
1 Post
what's up j! i texted you when you left but you might've been airborne already. hmm i got food poisoning on my way to phuket which was not fun but it only lasted 24 hours haha. the girl from riverside i always go with got proposed to by a dude that works at q bar that she knows...she hadn't talked to him in 6 months and we ran into him at q
you going back anytime soon? btw...post pics of your new setup!
you going back anytime soon? btw...post pics of your new setup!
#66
Cruising in my
#69
Under construction
iTrader: (3)
Old thread I know but I want your opinion guys, YES YOU!
NBP TL with gunmetal A-specs - what color lugs would you go with??
I was thinking something blueish...since the NBP has a little bit of dark blue in it. Anyways all opinions welcome and appreciated!
NBP TL with gunmetal A-specs - what color lugs would you go with??
I was thinking something blueish...since the NBP has a little bit of dark blue in it. Anyways all opinions welcome and appreciated!
#70
[Mod Censored Title]
if you have aftermarket wheels then your spec's are okay but if you're sporting OE's then they are ball seat - not conical seat. sorry if someone already pointed this out...i didn't have time to read the whole thread.
#72
[Mod Censored Title]
obviously if your type-s wheels are conical seat...keep rockin' the same lugs.
#73
Advanced
Join Date: Apr 2009
Location: COLLEGE STATION, TX
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Will these Muteki lugs fit on the stock 5 spoke rims?
http://cgi.ebay.com/ebaymotors/MUTEK...Q5fAccessories
http://cgi.ebay.com/ebaymotors/MUTEK...Q5fAccessories
#75
Racer
iTrader: (5)
Ive read through this thread (and done some searching) and it seems my question is still unanswered
Will my stock lugs work with a-spec wheels? (even if they do, is something else better that someone could suggest, but not $150)
Are gorilla locks a lug nut as well, or to they go over the lug nut?
http://www.amazon.com/Gorilla-Automo...5076652&sr=8-2 ...they look smaller than the lugs, so it will look weird, or is that expected?
If I'm envisioning this properly (and am prolly not), i'd have 3 oem lugs, 1 oem lug/lock, and 1 gorilla lock on each wheel....do i have that right?
Thanks!!
Will my stock lugs work with a-spec wheels? (even if they do, is something else better that someone could suggest, but not $150)
Are gorilla locks a lug nut as well, or to they go over the lug nut?
http://www.amazon.com/Gorilla-Automo...5076652&sr=8-2 ...they look smaller than the lugs, so it will look weird, or is that expected?
If I'm envisioning this properly (and am prolly not), i'd have 3 oem lugs, 1 oem lug/lock, and 1 gorilla lock on each wheel....do i have that right?
Thanks!!
Thread
Thread Starter
Forum
Replies
Last Post
neuronbob
3G RLX Tires, Wheels & Suspension
23
07-16-2019 10:48 AM