The Machine

iTrader: (8)

From what I have read with these style rims most have cleared the Brembo brakes with only using a 5mm spacer.

I<3JDM:Acura

Very nice... those are similar to the varrstoen es2's, let me know when you get pics!

wcurrin

Would these fit:

19" Avid 1 AV10

Front Wheels: 19" x 8.5"
Rear Wheels: 19" x 9.5"
Bolt Pattern: 5x114.3

Front Offset: 20 ET
Rear Offset: 15 ET
Center Bore: 73.1

on a 2008 TL Type S, 5AT? (not lowered yet)

Turbocoop

iTrader: (3)

Ive done some more thinking and I am gonna go with the Grids in 18x8.5's, I found a place that sells em in a +25 offset, and according to their "wheel fitment expert" (sounds like BS to me), that offset will clear the brembos. Has anyone tried that offset? Again, the car is an 04 Aspec lowered about 2.25"...

EATSLEEPRACE

iTrader: (1)

I think the rear will poke to much because of the offset...I would do lower than 20-22et

wcurrin

Can someone help me out real quick....I have an '08 type S auto....stock suspension.

will Enkei PF01 18x8 +50 offset fit? Thanks.

ziggybon

I am gunna be getting these pretty soon with some TEIN basic's and i know i'll probably need spacers and a camber kit but i'm not sure what kind or size of the spacers.


Question on Brembo/Big Brake Clearance
Transmission (Manual or Auto): Manual 05'
Year/Trim (04-07, Base or Type S): Base
Wheel Make/Model: XXR 531
Wheel Size (**X**): 19x10
Wheel Offset (+**): +35
If lowered (amount): Probably around 2"

http://www.nlmotoring.com/XXR-531-Wh...p/53190140.htm

nismopowerdqg

i have some 18x8 w/ 38mm offset w/ 235/40/18 tires, they fit and dont rub. I went online (tirerack) to find one for my spare, but it says it does not fit my 04 TL Auto. Is this due to the different offset? They fit just fine and dont rub, should i expect any issues? Worked on cars my whole life and still dont understand offsets.

hhh0505

Any update on the 530s?

Dan07Tls

would this fit:

Avant Garde m220
front: 18x9.5
rear: 18x10.5
bolt pattern: 5x114.3

20 offset for both.
I have a 07 tl type s

Turbocoop

iTrader: (3)

I changed my mind again, wheels are a big decision after all. Now Im thinking:

TSW Nurburgrings
18x8.5 all around
+20mm offset
Going on an 04 TL Aspec lowered about 2.25"
I DO have the Brembos up front BTW which is my main concern

Ive seen the Nurburgrings on some TLs, but I couldnt find the offsets they used, can anyone confirm that this will work??? Thanks again

thughunter1961

I tried some Nurburgring 18x9.5 +40 and they mounted up okay test fitting without a tire. There was about 3/4" clearance, at the front shock housing so you probably would have to watch your tire size.

thughunter1961

Be advised I test fitted some XXR530 18x8.75 +33 and they will not clear the Brembos without a 6mm spacer. Awesome looking rims but the manufacturer and vendors are saying they will clear but they definately do not clear.

hhh0505

you need +20 offset, clears the brembos... I just ordered them

Just need to figure out what tires to get now and what size.

FlaK

as my first post, just wanted to say, what up Acurazine. on to my question, 20x7.5 +42, rolling on 225/30/20 rubber bands, its an 06 TL 6mt, stock suspension, but lowering on h&r's in the foreseeable future.

What do you fella's think?

The Machine

iTrader: (8)

No. 20's are not a good size for the 3G TL. Also stock width is 8" and you're moving down to a 7.5" wheel. Since you have a 6MT you have Brembo brakes so the 7.5" rim will not clear them. Find another rim you like in 19's as they are the max size you should go for looks and also find something in at least an 8" width.

FlaK

I really wasn't consider 20's originally, just a sick set came up f/s locally. Ideally I was looking for aggressive 18's. I hail from the land of aggressive offset rwd yota's, so my preference is something along those lines. What's a guy looking at if he doesn't want to do a lot of fender work, but wants to run low offset high width mags? Ideally a 245-30/35-18.....

thanks in advance

bbergero1181

wanted to know if these rims would fit my 07 Type S. i love the look of them

Konig Deception

18X8 5-114.3 20BCM

iv been reading posts but i'm still confused about offset and hub bore... any help would be great! this will be my first time adding after market rims to my car.

Turbocoop

iTrader: (3)

I changed my mind again- all I need to know now is if the 18x9 +25 Rota G Forces will clear the Brembos... I know the +30s do, but I'd rather go with +25. I searched for hours and found a lot of info but not specifically if they clear Brembos. I promise this is the last time

Brown Burgundy

Saleen Replicas
18x9 +24 offset all around

I know I have seen some pics of a couple of 3G TL's with them, curious about having to roll fenders or not. Im driving an 05 base TL with spec kit. Thanks!

xander12

Ok guys I need your help? Will these fit my 2007 tls 5at?





5Axis Rims were on a Lexus IS 250 RWD. Front wheels 19 x 8.5. Rear Staggered Fit 19 x 9.5. Front Tire size 235/35ZR19. Rear tire size 235/30ZR19.

5x114.3 pattern

Front offset 45
Rear 35

ziggybon

Anybody?

PR-Type-R

Wheel Make/Model: VOLK SL37
Wheel Size (**X**): FR 18X8.5 RR 18X9.5
Wheel Offset (+**): 20
If lowered (amount): 3 INCHES

Question on Brembo/Big Brake Clearance
Transmission: AUTO
Year/Trim: 07 TYPE S

Questions on Tires
Tire Make/Model:NITTO
Width/Sidewall-Diameter:245/40/18 REAR:275/40/18
If lowered (amount): 3 INCHES

yoks032rs

Ok looking at this set-up. They are Mustang reps it dose'nt give
me Lug pattern. So maybe someone can give some insite?
Also going with tein coilovers 2.00 drop F 1.75 drop B, will be
going on 04 TL base 5at. I saw them on wheelreplicas.com.

ANTHRACITE Deep Dish 95R
18x9
Offset+ 36
Centerbore 70.8
Want to use Tire size 245/40/18 with these wheels.

Thanks

Jordan00711

Yes they will fit, without a roll depending on tire size. If you went with a 235/35 you'll be fine. 245's you may run into some issues. If you roll your fenders you can run the 245's or if you roll/pull or roll and add some negative camber you could add spacers.

Im assuming your asking about my wheels? lol
Yes they will fit, the +25 gives you 5mm more clearance than the +30 set will.

You can run those on a 225/235 without a roll. I ran 18x9's +25 on a 225 for a bit before getting mine rolled, no rubbage anywhere.

Holy shit batman, I think youd be the first to run a 275 on an Acura TL much less who nees a 275 on the rear of a FWD car lol . If your wanting the staggered/meaty look put your 245's on the rear and get some 225's for the fronts. With the tire sizes I listed youll fit without a roll in the front but you will need one in the rear.

Yes they will fit but I would recommend a smaller tire such as 235/40/18. Bolt pattern is 5x114.3 just like our cars. Id even reccomend a small spacer (5mm) or if your fenders are rolled you could do a 15mm spacer all the way around.

Turbocoop

iTrader: (3)

Thanks Jordan... I ordered some +30s, too bad I have to wait 3 months before I get to see em. Ill have my 18x8.5" aspecs for sale when I get back from deployment

bostontremblay

acura tl 06 base a/t
a-spec suspension
19 inch wheels axis
5x114.3 +35

fit on my car??
no rubbing?
thank you

Jordan00711

You could've asked in here instead of posting a thread as well. Both of which are useless since you didn't mention a wheel width.

I don't think at aspec ride height you would rub anyway but if you decided to go lower youll have no rubbing with a +35 up to 9.5" wheel with a roll and proper tire size.

yoks032rs

Thanks Jordan, got some decisions to make. Either the mustang
replicas or the XXR's 527's 18x8.75 +35's.

ziggybon

Thanks Jordan! Would i need spacers even if i run 235/35 being that i have the brems up front?

ryanwgregg

I've been lurking around here for about a year and I have read most of this thread, so I'm pretty sure on the answer, but just want to be sure.

TSW Bardo or TSW Brooklands
18x8 or 19x8 +40
245/40/18 or 245/35/19

I want to go to 255 but not sure if I can find a tire that would look right on such a small width. I saw the Nurburgrings with a +35 (+40 with a 5mm spacer) that looked great! Please give me your thoughts. Thanks

TSW Bardo in Silver



TSW Brooklands in Silver



TSW Brooklands in Matte Black

Jordan00711

I vote for the mustang reps!

Yes you'll need spacers with brembos. Not 100% sure but probably around a 15mm. That being said to run that square you'll need to be rolled flat in the front or add camber, and in the rear you'll be fine with a mild roll and natural camber(I've had this same setup in the rear).

How low are you? Are your fenders rolled? If your decently lowered with rolled fenders all of those fit with tons of room to spare. I'd recommend a 9" wheel in the +30 range if your looking for more aggressive and better fitting than stock without losing functionality. Running a 235 tire would be my recommendation, and keep in mind depending the tire brand you choose the size varies a bit. Some run slightly wider and some run narrower so keep that in mind when your picking out what you want in your setup!

ryanwgregg

I only plan on doing the A Spec Suspension...

Jordan00711

With that ride height you won't rub whatsoever nor will you need a fender roll.

JoeyDiamonds

iTrader: (1)

Hey does anybody know if I can fit:

Transmission (Manual or Auto): Manual
Year/Trim (04-07, Base or Type S): 04 Base
Wheel Make/Model: Vossen CV5
Wheel Size (**X**): 20x10.5 all around
Wheel Offset (+**): +38
If lowered (amount): Probably around 1.5-2"

Sulliwully

Wheels
M-Sport
18x8.5 Front and back +45 offset

Tires
Pirelli P Nero All season
235/40/18 Front and back

Good fit/ no rub?

First post,

Thanks for any info

Brown Burgundy

Thanks Jodan00711, appreciate the input!

Brown Burgundy

You can run those on a 225/235 without a roll. I ran 18x9's +25 on a 225 for a bit before getting mine rolled, no rubbage anywhere.

One other quick question, will that hold fast if im lowered? I just picked up Tein S-Tech springs which I'll be installing soon. Thanks again man!

twigglius

iTrader: (6)

I posted this in another wheel thread but wanted to ask here as well. I Was also looking at these Wheels in a 19x10+35 all the way around. My only concern is the Inner clearance of the wheel. I'm currently running 19x19.5 +34 and if I get 19x10+35 I Will have 19mm less Clearance on the Inside. Is there any concern of rubbing on any suspension components?

paperboy42190

iTrader: (7)

anyone know if work XD9 rims in 18x9 will clear brembos? there are +20 and +30 offset but im not sure if either/neither clear