Hello everyone! This will be my first post on here. I have same slight shaking/vibration when getting up to speed and a whole bunch of play in the wheel especially when going over uneven road. I tracked this issue down to my inner tierods after wiggling my wheels around and inspecting other components. How can I make the removal process go smooth? I know a big pipe wrench will help, but if anyone has any tips or tricks for me that would help tremendously.
I only have to front lowered because i’m waiting on the money to buy an OEM strut mount bolt. Last owner used some aftermarket hardware and I don’t feel safe re using. " class="post_inline_image" data-size="2000x1504" data-src="https://cimg0.ibsrv.net/gimg/acurazine.com-vbulletin/2000x1504/img_4440_c9733fd3a64b03336553fd19238cf4d1c4c457c0.jpeg" loading="lazy" />
Here’s a picture of her I only have to front lowered because i’m waiting on the money to buy an OEM strut mount bolt. Last owner used some aftermarket hardware and I don’t feel safe re using.

 

Remember to put a drain pan or spill pad under the rack when removing the inner tie rod - some p/s fluid will likely leak out.

Good luck.