When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Does anyone know how they are supposed to be oriented? Supposedly there are supposed to be factory markings cast in the control arm but I do not see them. The bushings themselves have an arrow and dot 180 degrees apart on each side with the arrows/dots being on opposite ends when you flip the bushing over. The bushings in my car had been replaced before and it looks like the previous tech put some marks on the control arm with a paint pen (2 on top side, 1 on bottom side) so that gets me close but I don't really have any way of being sure I am not 180 degrees off. I pressed out the right side bushing without paying attention to its orientation and looking at the left side bushing the arrows/dots appears to be off 30 degrees or so from the marker marks on the control arm. Does anyone know how these bushings are supposed to go in?
3- right side top 2- Right side bottom 7 test fit right side 8- left side top 6 left side top 5 left side top