It's now the "Official" Slammed Thread-3G TL's.
#1442
sweet, same color?? post pics, im tired or hearing tires rub on bumps on the road and scraping on font bumper when i make wide turns, i hate going out of my daily route, especially at night cause you cant see bumps!! lol
#1444
Instructor
#1446
I'm on megans.
nivekov, my exhaust sounds completely different now too. I know before, when I raised up the car on the rack my flexpipe was chewed up, but I guess thats just what we have to give up to be this low.. The jpipe is the lowest point in our cars. Kinda scared to see how mine looks too.
nivekov, my exhaust sounds completely different now too. I know before, when I raised up the car on the rack my flexpipe was chewed up, but I guess thats just what we have to give up to be this low.. The jpipe is the lowest point in our cars. Kinda scared to see how mine looks too.
The following users liked this post:
ebelp (08-10-2012)
#1454
Moderator
iTrader: (3)
^No you won't, you'll be dropped on springs, not slammed
![Tomato](https://acurazine.com/forums/images/smilies/tomato.gif)
#1456
Moderator
iTrader: (3)
![Blah Blah](https://acurazine.com/forums/images/smilies/blahblah.gif)
The following users liked this post:
GeeteeDan (08-17-2012)
The following users liked this post:
Undying Dreams (08-24-2012)
The following 2 users liked this post by 05_NBP_TL:
mikebikelife (09-09-2012),
NetoAzul (10-13-2012)
#1463
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
^^^agreed.
BUT, I have to insist that that is NOT driveable. I mean, you literally wouldn't even need to have a dip in the road to have a catastrophic accident or destroy the bottom of your car.
BUT, it does look cool.
07tl-s6speed, loving the while wheel look. plastidip too?
BUT, I have to insist that that is NOT driveable. I mean, you literally wouldn't even need to have a dip in the road to have a catastrophic accident or destroy the bottom of your car.
BUT, it does look cool.
07tl-s6speed, loving the while wheel look. plastidip too?
The following users liked this post:
05_NBP_TL (08-21-2012)
#1465
Thats how low mine was. Took only a month to destroy most of the underside my car. And I BABIED around. Went back up an inch and half. But now my jpipe is chewed and sounds like crap. I just put exhaust tape on it thinking it'll be fine, but I must have hit something on the way home cus it's already leaked! FML. Wasted like $10 so far on that.
Planning to fix it up and sell it to get an ATLP v2.
Is the ATLP that much higher than the rv6 v3?
And how much did all that heatwrap run you rockstar? Saw some at pepboys but it was like $50.
Planning to fix it up and sell it to get an ATLP v2.
Is the ATLP that much higher than the rv6 v3?
And how much did all that heatwrap run you rockstar? Saw some at pepboys but it was like $50.
Last edited by phatrick; 08-20-2012 at 09:10 PM.
#1466
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
2" wide and 50' of the titanium stuff with the lava rock in it was $37 shipped on amazon.
Yeah, I've seen where someone on here had his V1 welded and repaired as well as had a skid plate welded on under it to ensure it didn't get fkd again...
V2 ATLP puts the jpipe above the subframe where the RV6 doesn't...almost certain.
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
Yeah, I've seen where someone on here had his V1 welded and repaired as well as had a skid plate welded on under it to ensure it didn't get fkd again...
V2 ATLP puts the jpipe above the subframe where the RV6 doesn't...almost certain.
#1468
So after 2 days of checking out the jpipe/damage, it seems my leak is not coming from the jpipe but from my rear cat. I wonder if dragging my jpipe around so much has caused it to yank on the cat and tug it loose? fml.
#1469
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
^^^I would bet on it...you can probably get that welded...or might be time to upgrade to PCD or HFPC if you haven't already.
J.
05_NBP...not me! I just used clamps to make a skid plate but that was stolen from the other guy. I can't remember where I saw it but he actually had it welded in.
J.
05_NBP...not me! I just used clamps to make a skid plate but that was stolen from the other guy. I can't remember where I saw it but he actually had it welded in.
#1473
Megan LP series. I might end up selling soon.
![Name: DSC_0183.jpg
Views: 258
Size: 156.1 KB](https://acurazine.com/forums/attachments/3g-tl-photograph-gallery-96/50357d1501287510-its-now-official-slammed-thread-3g-tls-dsc_0183.jpg)
I'm also selling my set up!!!!!!!!!!!!!!!!!! check out the link!!!!!!!
https://acurazine.com/forums/showthr...5#post13996055
![Name: DSC_0183.jpg
Views: 258
Size: 156.1 KB](https://acurazine.com/forums/attachments/3g-tl-photograph-gallery-96/50357d1501287510-its-now-official-slammed-thread-3g-tls-dsc_0183.jpg)
I'm also selling my set up!!!!!!!!!!!!!!!!!! check out the link!!!!!!!
https://acurazine.com/forums/showthr...5#post13996055
#1478
Instructor
Megan LP series. I might end up selling soon.
![](http://i96.photobucket.com/albums/l199/JDM_Shrimp/DSC_0183.jpg)
I'm also selling my set up!!!!!!!!!!!!!!!!!! check out the link!!!!!!!
https://acurazine.com/forums/showthr...5#post13996055
![](http://i96.photobucket.com/albums/l199/JDM_Shrimp/DSC_0183.jpg)
I'm also selling my set up!!!!!!!!!!!!!!!!!! check out the link!!!!!!!
https://acurazine.com/forums/showthr...5#post13996055
The following users liked this post:
GeeteeDan (08-25-2012)