RV6 V2 True Dual Exhaust for '04-'08 TL Type-S Quads Batch 2 Collecting deposits
The following users liked this post:
zachlone (01-24-2013)
01-24-2013, 03:00 PM
#1123
BANNED
iTrader: (33)
01-24-2013, 03:08 PM
#1124
Drifting
^ Now its a party!
01-24-2013, 03:10 PM
#1125
Desert Life Sucks!!
iTrader: (2)
Join Date: May 2011
Location: Land of Entrapment
Age: 46
Posts: 3,455
Received 673 Likes
on
500 Posts
No rasp whatsoever, a little bit of drone if going 50 mph in 6th gear going up a slight incline. Stuff like that, otherwise no drone at all.
Very happy with this exhaust took about 2 hours to install and that included jacking my car off the ground to make room and taking my time.
Yo i dropped like 6000 dollors or more into my car and havnt installed a thing myself. I know its sad but i was never shown how to work on cars my bro is a mechanic he doesn't help me out. I know the most fun is working on the car i just plastidipped some parts on car and was fun. I wish i could paint calipers, do own speaker wiring and install hfpc jpipe and this exhaust but no i just suck at this. I do have a fiend now tho thats teaching me little by little so i will know how to work on cars better as time goes by.
I have done all my own work after a shop charged 300 to install some coils once and I said never again. Now I can rebuild an engine down to replace brakes.
Motivation and willingness to learn and TRY. You can do it.
The following 4 users liked this post by sauceja:
01-24-2013, 11:48 PM
#1127
sorry, i deleted the first video thinking my license plate was showing
http://youtu.be/A9aHQRezikE
http://youtu.be/A9aHQRezikE
01-25-2013, 08:40 AM
#1130
Drifting
The following users liked this post:
Richie v6 (02-01-2013)
01-25-2013, 12:02 PM
#1132
Yo i dropped like 6000 dollors or more into my car and havnt installed a thing myself. I know its sad but i was never shown how to work on cars my bro is a mechanic he doesn't help me out. I know the most fun is working on the car i just plastidipped some parts on car and was fun. I wish i could paint calipers, do own speaker wiring and install hfpc jpipe and this exhaust but no i just suck at this. I do have a fiend now tho thats teaching me little by little so i will know how to work on cars better as time goes by.
Agreed aero kroil is the best stuff made. I get it from work for free too!
Last edited by Steven Bell; 01-28-2013 at 11:05 PM. Reason: Merged Posts
01-26-2013, 03:11 AM
#1133
I'll get you guys a video tomorrow under load. The reason I haven't is cause no gopro. It'll be a recording from the drivers seat and off a Samsung s3.
Last edited by Steven Bell; 01-28-2013 at 11:06 PM. Reason: Merged Posts
The following users liked this post:
BostonSilverTypeS (01-26-2013)
01-26-2013, 12:03 PM
#1134
Desert Life Sucks!!
iTrader: (2)
Join Date: May 2011
Location: Land of Entrapment
Age: 46
Posts: 3,455
Received 673 Likes
on
500 Posts
Barely noticing rasp is not the same as not having rasp unfortunately.
You can get used to something but that doesn't mean it went away. Just saying.
01-26-2013, 03:22 PM
#1135
[QUOTE=sauceja;14284810]Thats where I got mine. It really creeps into crevices.
one soak overnight and itll come free. if it doesn't then no chemical will do it. at that point its time to break out the oxi acetelyene torch
one soak overnight and itll come free. if it doesn't then no chemical will do it. at that point its time to break out the oxi acetelyene torch
01-26-2013, 05:26 PM
#1136
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
I have used a breaker bar on multiple car' exhaust and they break open just fine even after being in midwest winter 
01-27-2013, 07:59 PM
#1138
... As soon as I get it. Paid on the 18th, still waiting on it to ship/tracking info. Got an email from Richie on Wednesday saying it was being prepped for shipping...
01-28-2013, 09:28 PM
#1141
this is why my first video was only in neutral. no, i do not plan on buying a GoPro at least not until i get certified skydiving and thats not gonna happen for a couple years (because of time and work)
The following users liked this post:
rockstar143 (01-31-2013)
01-28-2013, 09:42 PM
#1142
this is why my first video was only in neutral. no, i do not plan on buying a GoPro at least not until i get certified skydiving and thats not gonna happen for a couple years (because of time and work)
http://youtu.be/tX3SIxkEoyk
http://youtu.be/tX3SIxkEoyk
01-28-2013, 11:14 PM
#1143
N0w $hiftinG N/A
Sorry to thread jack richie but I just wanted to say right when I was waiting to place an order MY poor TL, RIP 05 6MT was totaled in an accient after xmas which I have mentioned in one of my started threads. I wish I was able to still buy this exhaust setup up But long story short I wll be searching for a 6MT 08-09 type S and in the mean time I m enjoying the new toy. a nice N55 BMW. an I will always be on these forums so keep up the good work richie. LEt me know when you come over to the BMW side.
01-28-2013, 11:35 PM
#1144
Sorry to thread jack richie but I just wanted to say right when I was waiting to place an order MY poor TL, RIP 05 6MT was totaled in an accient after xmas which I have mentioned in one of my started threads. I wish I was able to still buy this exhaust setup up But long story short I wll be searching for a 6MT 08-09 type S and in the mean time I m enjoying the new toy. a nice N55 BMW. an I will always be on these forums so keep up the good work richie. LEt me know when you come over to the BMW side.
The following users liked this post:
justnspace (01-29-2013)
01-30-2013, 09:19 PM
#1149
N0w $hiftinG N/A
Kooky indeed! Would love an update! 
01-31-2013, 12:39 PM
#1154
Mine is scheduled for delivery tomorrow! Exactly 11 months to the day since putting the deposit down... Yeah, restless and kooky might be an understatement.
Side note - My bumper is finally getting painted after it got scratched over the holidays, so hopefully I'll be able to install tomorrow night or Saturday. Pics and (hopefully) video to come...
Side note - My bumper is finally getting painted after it got scratched over the holidays, so hopefully I'll be able to install tomorrow night or Saturday. Pics and (hopefully) video to come...
02-01-2013, 03:09 AM
#1156
Former Sponsor
Thread Starter
Sorry about the lack of updates. My welder is still working on away on the exhausts and other RV6 goodies. I have been busy planing RV6 V2 with CNC and 3D scanning capabilities.
How would you guys like a affordable, practical turbo kit.
The following 2 users liked this post by Richie v6:
justnspace (02-01-2013),
Morrissey25 (02-05-2013)
02-01-2013, 07:37 AM
#1158
Oh Richie, you had me at hello.
And if you're talking about 3D capabilities that'll help you in making a dedicated base tip. Then let the heavens bless you for it.
If you're talking about an affordable and and reliable turbo kit, then I'm giddy.
J.
And if you're talking about 3D capabilities that'll help you in making a dedicated base tip. Then let the heavens bless you for it.
If you're talking about an affordable and and reliable turbo kit, then I'm giddy.
J.
02-01-2013, 08:10 AM
#1159
The Track Terror
All depends what "affordable" would look like, but I'm down for a reliable turbo set-up that works with Flashpro...
Also, would that include a custom LSD for us one-wheel-wonder AT folks???
Wishful thinking I know...
Also, would that include a custom LSD for us one-wheel-wonder AT folks???
Wishful thinking I know...
