RV6 V2 J-Pipe Sneak Peak/Feeler
06-25-2009, 12:19 AM
#281
do you guys seriously think there will be a difference between richies V1 and V2, to have to wait for a lousy dyno?? look at the 2 designs, there almost identical LOL. i say none or 1 whp at the most between the 2 :/
until he implements a nice 2 to 1 transtion collector like the ATLP and XLR8, his jpipe will always be 3rd on the list, but it is the cheapest. you get what you pay for IMO.
the difference i felt going from stock to the RV6 jpipe, was the same difference i felt going from RV6 to the ATLP jpipe. seriously, it flows that much better. now i have ATLP V2 and it is the winner hands down, cause it flows just as well as V1, but has the much needed ground clearance for us lowered guys
until he implements a nice 2 to 1 transtion collector like the ATLP and XLR8, his jpipe will always be 3rd on the list, but it is the cheapest. you get what you pay for IMO.
the difference i felt going from stock to the RV6 jpipe, was the same difference i felt going from RV6 to the ATLP jpipe. seriously, it flows that much better. now i have ATLP V2 and it is the winner hands down, cause it flows just as well as V1, but has the much needed ground clearance for us lowered guys
Last edited by 04accordcpe; 06-25-2009 at 12:21 AM.
06-25-2009, 04:47 AM
#283
Former Sponsor
Thread Starter
Hey Richie I just bought a set of used precat deletes from blackura can u sell me the gaskets needed for the install or do I use oem I'd rather get the new ones from u also my girl will be paying for my jpipe/ test pipe combo tonight when she gets home I'll send u an email so u can now it's for me perhaps u can ship the precat gasket at thesame time
man u serious.....we know richie makes quality products but we want to see that on paper.....
we have been waiting for the dyno since a while (almost 2 months).....what do you mean give him a break.....if you want to buy the stuff without dyno results go ahead do it.....but if we are asking for a dyno then u shudnt get in the middle with your classic "give him a break" shit !!!!
we have been waiting for the dyno since a while (almost 2 months).....what do you mean give him a break.....if you want to buy the stuff without dyno results go ahead do it.....but if we are asking for a dyno then u shudnt get in the middle with your classic "give him a break" shit !!!!
I will add that ASAP I was waiting to get them in hand first.
07-01-2009, 04:41 PM
#292
Modding my TL in
Join Date: Jun 2005
Location: Chicago SW Burbs
Age: 52
Posts: 317
Likes: 0
Received 1 Like
on
1 Post
Richie,
Please let us know when you have the J-Pipes and Test-Pipes in hand. I'd like to pay cash and pick it up from you local (you said it was okay). Please let me know the best method of contact.
Thanks!!!
Please let us know when you have the J-Pipes and Test-Pipes in hand. I'd like to pay cash and pick it up from you local (you said it was okay). Please let me know the best method of contact.
Thanks!!!
07-02-2009, 09:03 AM
#295
Former Sponsor
Thread Starter
Yes I just want to inspect the shipment first.
07-02-2009, 12:09 PM
#296
I drive a Subata.
iTrader: (1)
wait, so it's $360 for j-pipe and test pipe?
07-06-2009, 01:13 PM
#302
I drive a Subata.
iTrader: (1)
WOW, that's so much cheaper than ATLP combo. AND shippping is free too huh?
Do I just order online or through you?
This is it huh? http://www.r-.ecrater.com/product.php?pid=2720061
J-Pipe + Race Pipe
Do I just order online or through you?
This is it huh? http://www.r-.ecrater.com/product.php?pid=2720061
J-Pipe + Race Pipe
07-07-2009, 03:32 AM
#304
Former Sponsor
Thread Starter
WOW, that's so much cheaper than ATLP combo. AND shippping is free too huh?
Do I just order online or through you?
This is it huh? http://www.r-.ecrater.com/product.php?pid=2720061
J-Pipe + Race Pipe
Do I just order online or through you?
This is it huh? http://www.r-.ecrater.com/product.php?pid=2720061
J-Pipe + Race Pipe
they will ship this week
07-07-2009, 03:37 AM
#305
Former Sponsor
Thread Starter
Hey guys the jpipes were delivered today. I will start to process them ASAP please check your email with instruction on how to finish payment and confirm your shipping address. I plan to keep the group buy pricing for another week as a summer speical. Everything came out well I hope to get dynos soon. I should have some time after HIN.
Summer Special www.rv6-p.com
Summer Special www.rv6-p.com
07-07-2009, 06:35 AM
#308
Hey guys the jpipes were delivered today. I will start to process them ASAP please check your email with instruction on how to finish payment and confirm your shipping address. I plan to keep the group buy pricing for another week as a summer speical. Everything came out well I hope to get dynos soon. I should have some time after HIN.
Summer Special www.rv6-p.com
Summer Special www.rv6-p.com
07-07-2009, 06:48 PM
#309
I drive a Subata.
iTrader: (1)
wait, should i get the race pipe or test pipe? i still don't get the difference between them. 
07-08-2009, 02:43 AM
#313
Former Sponsor
Thread Starter
07-08-2009, 08:51 PM
#315
Modding my TL in
Join Date: Jun 2005
Location: Chicago SW Burbs
Age: 52
Posts: 317
Likes: 0
Received 1 Like
on
1 Post
I wanted to publicly thank Richie for spending a little time out of his busy schedule today to allow me to pick up the J-Pipe and Test pipe combo. I picked up the strut bar from him too!
I would also like to say that the quality of the products are awesome and engineered perfectly!
Needless to say, and as I promised Richie, I installed the products today (after the IM spacer mod) and had no difficulty in doing it myself, in my own garage, with the proper tools.
In doing a test drive, I noticed the exhaust system was much more free flowing, the tiny bit of rasp from my straight pipe back to the stock mufflers is now gone, and the car sounds mean! I am a very happy customer.
I'll go dyno my car as soon as possible.
Again, thanks so much Richie!
Picture below:
I would also like to say that the quality of the products are awesome and engineered perfectly!
Needless to say, and as I promised Richie, I installed the products today (after the IM spacer mod) and had no difficulty in doing it myself, in my own garage, with the proper tools.
In doing a test drive, I noticed the exhaust system was much more free flowing, the tiny bit of rasp from my straight pipe back to the stock mufflers is now gone, and the car sounds mean! I am a very happy customer.
I'll go dyno my car as soon as possible.
Again, thanks so much Richie!
Picture below:
07-08-2009, 10:42 PM
#317
I wanted to publicly thank Richie for spending a little time out of his busy schedule today to allow me to pick up the J-Pipe and Test pipe combo. I picked up the strut bar from him too!
I would also like to say that the quality of the products are awesome and engineered perfectly!
Needless to say, and as I promised Richie, I installed the products today (after the IM spacer mod) and had no difficulty in doing it myself, in my own garage, with the proper tools.
In doing a test drive, I noticed the exhaust system was much more free flowing, the tiny bit of rasp from my straight pipe back to the stock mufflers is now gone, and the car sounds mean! I am a very happy customer.
I'll go dyno my car as soon as possible.
Again, thanks so much Richie!
Picture below:
I would also like to say that the quality of the products are awesome and engineered perfectly!
Needless to say, and as I promised Richie, I installed the products today (after the IM spacer mod) and had no difficulty in doing it myself, in my own garage, with the proper tools.
In doing a test drive, I noticed the exhaust system was much more free flowing, the tiny bit of rasp from my straight pipe back to the stock mufflers is now gone, and the car sounds mean! I am a very happy customer.
I'll go dyno my car as soon as possible.
Again, thanks so much Richie!
Picture below:
07-08-2009, 11:03 PM
#318
I wanted to publicly thank Richie for spending a little time out of his busy schedule today to allow me to pick up the J-Pipe and Test pipe combo. I picked up the strut bar from him too!
I would also like to say that the quality of the products are awesome and engineered perfectly!
Needless to say, and as I promised Richie, I installed the products today (after the IM spacer mod) and had no difficulty in doing it myself, in my own garage, with the proper tools.
In doing a test drive, I noticed the exhaust system was much more free flowing, the tiny bit of rasp from my straight pipe back to the stock mufflers is now gone, and the car sounds mean! I am a very happy customer.
I'll go dyno my car as soon as possible.
Again, thanks so much Richie!
Picture below:
I would also like to say that the quality of the products are awesome and engineered perfectly!
Needless to say, and as I promised Richie, I installed the products today (after the IM spacer mod) and had no difficulty in doing it myself, in my own garage, with the proper tools.
In doing a test drive, I noticed the exhaust system was much more free flowing, the tiny bit of rasp from my straight pipe back to the stock mufflers is now gone, and the car sounds mean! I am a very happy customer.
I'll go dyno my car as soon as possible.
Again, thanks so much Richie!
Picture below:
