ATLP TL is under the knife...
#323
Racer
iTrader: (4)
Join Date: Apr 2008
Location: Vancouver, BC
Age: 35
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
Sorry guys for the delay. Had to pick up the tips from the port Friday and shopped around for pricing for the spoilers all weekend.
As far as ordering for Canada, yes, all Canadian orders must be through Phillip at Revspot. ONLY if you are on the pre-order list, I can ship them directly to you but remember we don't do retail anymore which is why only those that were on the list before we went wholesale/R&D only can receive them directly from us.
Sorry this has been confusing, we're in process of uploading our new site so everyone is going to be confused on where to order from.
Pre-order list - Order goes to me. (I know I'm backed up on e-mails. I most likely received it and will get to you!)
US orders (not on pre-order list) - Marcus @ HeelToeAuto.com
CANADIAN orders - Phillip @ Revspot.com
Hope this clears it up.
As far as ordering for Canada, yes, all Canadian orders must be through Phillip at Revspot. ONLY if you are on the pre-order list, I can ship them directly to you but remember we don't do retail anymore which is why only those that were on the list before we went wholesale/R&D only can receive them directly from us.
Sorry this has been confusing, we're in process of uploading our new site so everyone is going to be confused on where to order from.
Pre-order list - Order goes to me. (I know I'm backed up on e-mails. I most likely received it and will get to you!)
US orders (not on pre-order list) - Marcus @ HeelToeAuto.com
CANADIAN orders - Phillip @ Revspot.com
Hope this clears it up.
#324
#325
Rev High; Drive Happy
iTrader: (2)
Join Date: Feb 2008
Location: Scarborough, Ontario
Age: 34
Posts: 4,076
Received 398 Likes
on
332 Posts
So, if I can find someone on the list you guys can ship it to an American address, and I can drive over the border and pick it up? I juss don't feel like overpaying for an item that I everyone else is paying less for... 215 usd = 260 Cad. Since I can only buy from Rev, it's $330..... sucks
Sucks to hear that it'll be $100 more for the roof spoiler..
#326
Racer
iTrader: (4)
Join Date: Apr 2008
Location: Vancouver, BC
Age: 35
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
BlueAc, you should paint it black. I've seen another member on here with a WDP with a black roof. He has an ebay spoiler and painted it black. Looks great.
PS. anyone who doesn't want the altp spoiler let me know, I'll take your spot.
Last edited by mista.huynh; 04-20-2009 at 10:13 PM.
#328
2007 A-Spec Type S
iTrader: (5)
Join Date: May 2008
Location: Long Island, NY
Age: 51
Posts: 251
Likes: 0
Received 3 Likes
on
3 Posts
So, mine was delivered this morning, and I took it out and positioned it on the rear glass to see how it looks. When I press down on one side, the other is off the glass by a good 1 to 1 1/2 inches. This can't be right? Did I get a defect?
#333
Just leave it out in the heat and then weight the center down with something for alil bit. Mine was fixed super duty double sided tape and when I got home I put weights on either side just to make sure it seals good.
#334
E-mail Mike (atlp) and ask him if he can get yours painted before he ships it to you. I believe he said it would be around $100 or so (for the paint), that may be cheaper/easier for you.
#341
Yes I thinking the same thing, but then again you do got the color matched window visors... it might go well if what you got goin' on. But yes i wanna kinda see it too.
#342
Small update.
A few of the first spoilers send out had a small problem with it not fitting 100%. One side has been noted to prop up because the middle of the spoiler isn't concave enough. Although it's said to work with having a bit of weight on both sides, and putting some heat on it for about 10-15 minutes (hair dryer) I'll be going to troubleshoot this with the manufacturer this week. A solution may be just what I noted, or it could be more drastic.
A few of the first spoilers send out had a small problem with it not fitting 100%. One side has been noted to prop up because the middle of the spoiler isn't concave enough. Although it's said to work with having a bit of weight on both sides, and putting some heat on it for about 10-15 minutes (hair dryer) I'll be going to troubleshoot this with the manufacturer this week. A solution may be just what I noted, or it could be more drastic.
#344
Racer
#345
Instructor
iTrader: (1)
I got mine in this morning and test fitted it and definitely one side props up by 2-2.5 inches. I'll look forward to seeing a resolution to this and also maybe a good opportunity to get one painted instead since the price quotes I received here are rediculous lol. btw, I received screws/washers etc with my package. Are these just for an alternative way to mount the window spoiler?
#346
I got mine in this morning and test fitted it and definitely one side props up by 2-2.5 inches. I'll look forward to seeing a resolution to this and also maybe a good opportunity to get one painted instead since the price quotes I received here are rediculous lol. btw, I received screws/washers etc with my package. Are these just for an alternative way to mount the window spoiler?
#350
Racer
#357
are you serious?
I think I posted enough pics for the majority to get a good idea of how the spoiler looks but I'll go crazy posting up pics of exact angles and distances for each person.
The further away shots are at about 13 feet.
I think I posted enough pics for the majority to get a good idea of how the spoiler looks but I'll go crazy posting up pics of exact angles and distances for each person.
The further away shots are at about 13 feet.