Trying to get the production date expedited, need your help guys I'm sure you all want this to maximise your Bolton mods and all out performance.
I already spoke to them and if I can get enough people they move production up by alt. need your support guys. Please post up if youd be willing to enter the group buy.deposits will more than likely be half of the price but not collecting until honadata gives me ok

 

Can I see the email correspondence between you and Hondata, please?

Because, Hondata Abandoned us YEARS ago.

 

yea cause no demands, but now that they are more affordable the demand is huge cause there's only a few people that will do anything like this to a $35k + vehicle that is not a sports car. trust me i will get this done guys.

 

blah blah blah blah.

Lets see the email correspondence.

 

Dude, even HONDATA told me no and they even said it will cost way to much money R&D. I even know Doug and he told me straight up on the phone himself.
Again, I woudn't let Hondata see's this, it may get a little nasty.

 

Homeboynyc, April 1st was 4 months ago.

 

He should show it on here and not privately

 

^yes.
if he cant provide proof then why should I believe him. especially some one named homeboy

if there are no volley's of emails, then he should post up who he talked to at Hondata, as well as provide his name.

SO, that I could call and verify.

 

 

I do not have an email we spoke on the phone, you guys can either jump on the wagon and help me make this happen sooner or if your not interested then don't say crap, I know before they gave you the finger cause it wasn't enough demand but now there is and all i need to collect enough people and they may push production to 6 months.
I will not make $ on this I just want to be able to tune my car past 325 whp all motor trying to be the first 350hp all motor TL and I will do it. so negative comments keep to yourself otherwise help me.

 

^please provide who you talked to over the phone.
please provide your name.
SO, I can call and verify.

who really cares if you make money off this?
I too want to push my car past 300hp.
Butt, if you cant provide proof that you talked to them and are willing to do this, who is to say that we believe you.

 

I will ask Javier @ hondata who ask me to get this done so he can help me, to post up here.

 

What I'm asking of you is very simple.

your name.
and who you spoke to.

 

^his name is homeboy and he's from NYC. what's so hard to understand, justin?

 

Should I trust this homeboy from nyc, Sharksbreath?

 

we spoke about 1.5 weeks ago
My name is Alan but go by homeboy on all forums.
right now they are working on 12 civic si. but again he said if I can show proof of what i'm telling them then it's no go, so it's really up to you to join me or just walk away. plus wtf i'm not even asking for $ bro

 

^it doesnt matter about money, breaux.

Alan, you have to understand that there are many of these threads.
NOTHING has come to fruition.

Unless Hondata themselves come to this very board and announces that they are willing to do something then we can talk.

 

I live in North Carolina now.

3rd k-series ef in the states, first to run 11.6 116mph stock motor k20 w/ boltons

dereyes102280 ebay
homeboynyc = s2ki.com ; my350.com ; k20a.org; b20vtec.com; honda-tech.com; everywhere

need the flashpro not ur $

and look:

http://www.hondata.com/forum/viewtopic.php?f=10&t=13689

 

ALl I'm asking for is proof, Alan.

in the forum you provided, there is NO PROOF. lol

this doesnt look promising. LOL.

 

listen bro all i'm trying to do is get a product worthy that we can tune our cars and keep the factory functions and inspection friendly. you either say you would buy one too. if i have sufficient hondata then will produce them. and I may be able to get them to do sooner if i present a deposit option but I doubt that they take our cash, more then likely they will produce, r&d and then they will sell it to us. now if you are coming out with any ecu's that can do that and I may sabotage your plans please tell me otherwise help us or stay out

 

the megasquirt 3 does all what you want.

POW, right to the kissa.




BREAUX.

 

and you can post on either this one or the link to hondata i provided

 

why?
on their forums, they specifically said "we're not doing this"

 

[QUOTE=justnspace;14022859]the megasquirt 3 does all what you want.


yea but it''s a huge price difference and if I can't get this done that will be the route i take.

 

i think we just came around full circle.

 

wow really justin? I'm starting to see ignorance sorry bro i'm done with you,
Whoever would like to see this happen soon pls post.otherwise buy megasquirt.

look at date
Author Message
Hondata
Post subject: Hondata Development PolicyPosted: Mon Nov 10, 2003 6:39 pm

Site Admin

 

 

it felt like we went around a square.

 

and We will not comment on future products or work in progress with regards to features, release dates or any other information.

While we accept that this can be frustrating to some vehicle owners, past experience has shown us that the premature release of information has a strong negative effect on our work here at Hondata.

for obvious reason of people calling them 100 xs bout a product that is in the works still.

 

here's another thought for you.

Neptune came to our forums and specifically said "while the Jseries looks promising, we are not working on it at the moment."

 

It's 2012, almost the end of the world.

 

Here's a thought. Just humor the man and say yes or no.

This thread is no different then any other teaser thread to gauge interest regardless if it's the real deal or not. If it happens cool, if not then OMG another worthless tread on the internet the world is ending.

I didn't see anywhere in his link that they "were not doing this". His link just stated that they don't release any info on anything they are or are not developing. And even the message posted by Hondata In that link is dated Nov '03 lol

Cliffs: just humor the guy lol

 

consider this humoring the guy: Can't say I'm really interested.

 

Not interested, I've already talked to Doug. Worthless thread it is.

 

in his original post, it says to expedite the production date.

if its coming out, GREAT!
until then, everything he says is hearsay

 

the thread and the info op provided is ambigous thus not looking so promising.

 

I can vouch for Alan. He is legit.
But I know nothing about his conversation with Hondata.
I can however, say that it makes perfect business sense for Hondata to pursue a J series application for FlashPro. The market is ripe for it.

 

Sub'd for shits and giggles

 

Count me definitely IN....if it's legit, then I definitely want a $700 or less tuning solution that hondata provides...

 

pointless thread is pointless.

If Hondata talked to a forum member and actually cared about finding out how much interest there is on this site for a tuning solution, THE ONLY THING someone would have to do is point them to the ECU thread.

The ECU thread has been steadily active for a long ass time with tons of responses and users involved, AND it shows just how frustrated the people who do care about a tuning solution are with the current vendor options. There's your proof of interest.

Seriously, this thread is dumb.