Custom Tail Lights and Head Lights by AckTL05
#1163
Rev High; Drive Happy
iTrader: (2)
Joined: Feb 2008
Posts: 4,076
Likes: 398
From: Scarborough, Ontario
Lol yup, it's kept right next to the coke cola recipe.
I actually do a 4 step seal process to ensure no gaps/holes which can cause leaks. One of the sealants steps I created myself and it can't be bought anywhere. Basically need glue and make sure it's sealed, I've seen things used from hit glue gun to superglue.
I actually do a 4 step seal process to ensure no gaps/holes which can cause leaks. One of the sealants steps I created myself and it can't be bought anywhere. Basically need glue and make sure it's sealed, I've seen things used from hit glue gun to superglue.
#1165
yeah, you should see some of the stuff I have seen. And yes, a glue gun lol. On a side note the taillight will still "stay together" because the screws holding the back pull the bezel to it which is in the front glass...so technically is "worked" but not for long.
#1166
i used a glue gun when i did mine, i only used it on the chrome strip that goes across the diffuser. When you clip the back "nipples" i used the glue gun there to hold it back in place.
#1168
#1170
Just curious. I have done multiple retrofits on other cars but only with headlights. Never done anything with a tail light. I have an extra set of tail lights laying around so I'm going to mess with them.
#1176
Originally Posted by rockstar143;14507847 [COLOR="Cyan"
that's hard[/COLOR].
soon, soon. very soon. like next week shipment date soon.
#1178
just installed these for a customer. He had DEPO headlights and when removed, they literally were dripping water out and the halos were faulty.
We found him a set of OEM headlights/installed supplied halos and my custom wiring harness for the halos to have a switch for them. Blacked out V2 with carbon fiber sides and ZKW-R lens:
We found him a set of OEM headlights/installed supplied halos and my custom wiring harness for the halos to have a switch for them. Blacked out V2 with carbon fiber sides and ZKW-R lens:
#1179
Hey Bruce, do you know what Halo these headlights have? I know you said supplied halo's. I've been looking for a better looking halo like the BMW's. I found a new design halo from TRD that look unique and are l.e.d. but you cannot see each individual light. Here's a link: http://www.theretrofitsource.com/pro...ducts_id=14906. I'm need to get my lights done soon and I'm liking the quality of your work.
#1180
The only modification I's like to make to my tail lights would be to clear out the turn signal part so I could replace the bulb with an amber one. Are genuine OEM tails required to do this or can it be done to any of the aftermarket ones available?
.
.
.
.
#1181
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
Joined: Sep 2008
Posts: 78,016
Likes: 20,033
Depo or OEM but either way, you'd need 2 sets of lights to achieve that look.
Base reds for the clear signal area...base 07 or type s for the clear outer lens.
OR, you could get the depo usr ghost ones and have bruce make the reflector/brake area red (that process we talked about Bruce) and paint bezel whatever color you want.
Base reds for the clear signal area...base 07 or type s for the clear outer lens.
OR, you could get the depo usr ghost ones and have bruce make the reflector/brake area red (that process we talked about Bruce) and paint bezel whatever color you want.
The following users liked this post:
jackson0780 (06-26-2013)
#1182
Thank you. Those are umnitza halos. I actually ordered those and will be installing them soon to test them out and see how they look. With something that takes time/money for the customer, I don't like recommending "new" items without them being on the market for sometime.
#1183
What MM? I ordered a set to test out, after all they are 1/4 the price of umnitza..we maybe seeing more Halo'ed TLs. lol
#1185
Hey Bruce, I was looking over this thread and I'm quite impressed. I was thinking about having you do my tails. I have an 07 NBP type-s. This is what I'm thinking as far as tail lights. I also thought I might have read somewhere that you had the a-spec kit for the type-s as well? I wanted to know if you could give me an estimate on the lights and the front a-spec lip? PM would be great, thank you sir!
#1187
Hey Bruce, I was looking over this thread and I'm quite impressed. I was thinking about having you do my tails. I have an 07 NBP type-s. This is what I'm thinking as far as tail lights. I also thought I might have read somewhere that you had the a-spec kit for the type-s as well? I wanted to know if you could give me an estimate on the lights and the front a-spec lip? PM would be great, thank you sir!
Its going to look great, headlights and tail lights
#1188
BTW everyone:
I sent in a set of diffusers to get a mold..so i will be installing/offering/selling all clear diffusers like the ones in the TYPE-S headlights soon...Depending upon mold price/sets ordered, they will be somewhere around $80-$110 a set. i will be shooting for the $90 price..
I sent in a set of diffusers to get a mold..so i will be installing/offering/selling all clear diffusers like the ones in the TYPE-S headlights soon...Depending upon mold price/sets ordered, they will be somewhere around $80-$110 a set. i will be shooting for the $90 price..
#1191
FYI, TRS sent out an email about the Morimoto LED halos... They should be in stock July 3rd. They did attempt to make amends for the delay. Although I don't really need to buy anything else from there... Lol
#1192
Hello all Acura nation.. I wanted to know if Acura tL type s parts fit on a regular TL type. I am referring to body parts, fenders, doors, interior, truck lid, bumpers, etc.. Help will be greatly appreciated.. Third generation model 06-08
#1193
Not the best thread to post this question in, but yeah, most parts from the 07/08 TL-S and TL are interchangeable like, bumpers (excluding rear, unless you want to do quads) doors, trunk lid, A-Spec parts, exhaust, most interior parts. Not as many things will fit with an 04-06TL. What exactly are you looking to swap? BTW, Bruce fantastic work sir!
Last edited by nttstt444; 06-27-2013 at 12:18 AM.
#1194
Not the best thread to post this question in, but yeah, most parts from the 07/08 TL-S and TL are interchangeable like, bumpers (excluding rear, unless you want to do quads) doors, trunk lid, A-Spec parts, exhaust, most interior parts. Not as many things will fit with an 04-06TL. What exactly are you looking to swap? BTW, Bruce fantastic work sir!
#1195
Not the best thread to post this question in, but yeah, most parts from the 07/08 TL-S and TL are interchangeable like, bumpers (excluding rear, unless you want to do quads) doors, trunk lid, A-Spec parts, exhaust, most interior parts. Not as many things will fit with an 04-06TL. What exactly are you looking to swap? BTW, Bruce fantastic work sir!
Where do u think I should post a question like this?
#1197
customer back out and I have a set of these
. Brand new. They were $130 shipped, i would take $115 shipped, or I can install them...look like this on the 04-06 or 07-08 as I just made for customers.
i also have these for sale: I worked out a deal for this customer who purchased these on a new set and took these back on trade, $350 plus shipping. Rare CDM tail lights, carbon fiber bottom, black bezel with lightly smoked internals.
. Brand new. They were $130 shipped, i would take $115 shipped, or I can install them...look like this on the 04-06 or 07-08 as I just made for customers.
i also have these for sale: I worked out a deal for this customer who purchased these on a new set and took these back on trade, $350 plus shipping. Rare CDM tail lights, carbon fiber bottom, black bezel with lightly smoked internals.
#1198
Moderator
Chapter Leader (South Florida Region)
Chapter Leader (South Florida Region)
iTrader: (6)
Joined: Sep 2008
Posts: 78,016
Likes: 20,033
When you say "rare"...what exactly do you mean?
Nice work, man...I dig the clear diffuser, if you hadn't sold me the oem type s ones, I'd likely be interested! It really finishes off the clear cleared look. Austin should buy these, he's been itching for clear diffusers.
Nice work, man...I dig the clear diffuser, if you hadn't sold me the oem type s ones, I'd likely be interested! It really finishes off the clear cleared look. Austin should buy these, he's been itching for clear diffusers.
#1199
Oh man! Those are sick! Very tempted ...
The following 2 users liked this post by rockstar143:
AckTL05 (07-10-2013),
whoismiked (07-09-2013)