How the F do u get cruise control to work? No Ron, I aint got no manual, I have an online forum manual. Either I can't figure it out or it is broken.

 

Set the main cruise button ON.
Go to a speed you want to put cruise at.
Press SET and the cruise will kick in until you cancel or brake.
You'll see CRUISE on the dash.

Is this what you are looking for.

 

RES set, the upper part of the button to the right of cruise on the steering wheel. Been doing that and nothing happens

 

moreace, you need to get dealer looked at the button. May be a faulty one.

 

-Firstly it only works above 25mph/40kph

- Accelerate to the speed you want and press master on button.

- Press DECEL/SET button and the cruise indicator comes on to show its working.

- If you hit the brakes you use the RES/ACCEL to resume.


Remember its not the RES button to start it, its the DECEL button.

Hope that works.

 

thanks

 

I had a problem with mine...There is an interlink with the brakes (cruise-cntl will shut off if you touch brakes) Something was wired wrong with mine, but the dealership fixed it. Took them a while to find the problem and order parts that were not needed.

 

So, in other words, you have a manual. Right?

 

Lol,

 

I'm glad we got that cleared up. How come you ain't got no manual? Not that it's any of my business.

Don't worry about it. We are here to help, even those without manuals. Or, especially those without manuals.

Give me the link to the online forum manual so I can check it out. It might help someone else someday.

Hint: When the cruise control is engaged, you can increase your speed 1 mph at a time by tapping the RES/ACCEL button, and decrease it 1 mph by tapping the DECEL/SET button. Holding either of these buttons in will continuously increase/decrease your speed until you release the button.

 

LOL Ron
I have a manual, just don't feel like reading it
I knew you would tell me too

 

I suspected as much.