SilverUA5

Anyone know if the silver from the '06 is the same as the '07? Thanks.

Ac Man

No, they are not the same. But I have an '05 SSM, and the '07 ASM do not look that different to me. Believe me, I was about get my mirrors painted too, but when I received them and compared it to my car I couldn't tell the difference. Trust me, it is not noticeable at all or I would have spent the money to paint them.

cM3go

How close is carbon gray pearl to Anthracite?

Tonywp75

I was at the dealership yesterday for an oil change, so i went outside to check out the color. The carbon grey is darker with less metallic flakes...i think.

rockyfeller

iTrader: (6)

CGP is totally off from AM

BAO-7786

check out my :
http://i155.photobucket.com/albums/s...t/DSCF0730.jpg
http://i155.photobucket.com/albums/s...t/DSCF0737.jpg

Evader

I'm going to resurrect this thread and hopefully I don't get flamed for it. I don't really have a lot of time right now to do an extensive search. I'm basically looking for confirmation on how to remove the plastic cover off the signal mirrors. I'm sure you just use a flat head screwdriver (with a cloth obviously) but at which end should I pry it off from? I'm considering changing these to either a blue or red bulb and also want to tint them for a more stealthy appearance. I just need to find some patience to also do my front sidemarkers, as i'd like to mod them to red to match the rear - illegal, who cares?

THTL

iTrader: (2)

so does CPG color different from Anthracite .
thanks.

yourit

anyone with a detailed instructions with pictures of how to do 2007 tl side view mirrors swap on a 06? I'm not sure how to take off the door panel and how to run the extra wire for powering the blinker?

ARX-01b

iTrader: (1)

Mine are due in next week. I guess I could do it if nobody else has already done it.

THTL

iTrader: (2)

please do that

ARX-01b

iTrader: (1)

What parts need to be broken off the 07 side markers to make them fit an 04?

Royce Han

nothing needs to be broken, just the wire plug connector needs to be modified to fit. its still the two same wires in the same +and - locations but a wider connector so it wont be a direct fit. i chopped extra plastic off the wider plug and used super glue but now that i think about it, i shouldve just chopped the connectors off and hardwired instead with some heat shrink tubing over it.

THTL

iTrader: (2)

bump

05tlguy

hope you are still active on this topic royce----or anyone!. i am trying to figure out how you snaked/ routed the power wire from the side mirror blinkers to the blinker bulb{s} up front. the mirrors look awesome and no more blind spots, but they would look a lot nicer if i coud get them to blink!! lol
p.s. can you be specific as to the routing from door through frame in particular?.. thanks all

Royce Han

well, the only way i know to get them to blink was to physically run a wire through the molex-boot/jamb and in through the fenders and tap into the middle wire of the three in the front blinker bulb. both sides are the same for the tapping into the middle wire. as far as how to get them throught the rubber molex, oh boy, hope you have small wrists and a tolerance for pain. my first time was kind of ghetto , i ran the wire exposed in the jamb and wrapped it in that plastic wire sleeve used for installs- i cant think of the exact name for it, dangit! but to redo it better i basically i undid the 2 halves of the rubber seal in the jamb, took a hot needle to melt a hole through the 2 halves of the molex. ran the wire through the 2 melted holes and then clicked the 2 halves back together to form a tight seal again. its not easy handling a hot needle in that small of space while trying to see what it is you are even doing and with a wire plug that has no slack in it. just hope you have a lot of will power ,lol

THTL

iTrader: (2)

Is there a way to hook up the 07 TL side mirrors onto an 05 TL to have it blink with the signals and also lit up with the two front doors opened.

Tripnbeats

I did the install on mine with no problems and when the doors are opened Im guessing unlocked u mean... they dont blink on that circuit if they did theyd be on all the time thats the parking light circuit

oneclu

is there a DIY for this anywhere?

DaddysOnehotAck

I brought mine from ebay for $350.00,last I checked they when up??.........

HONgDA

iTrader: (1)

I hope the 4g TL side mirrors will fit the 3g TL.

Simon151

You need an l-e-d load equilizer, you can get them on ebay cheap, they will make your lights bling normally again, led lights have low resistance, so your car thinks that there is a blown bulb on the car, so it blinks fast to alert you of a blown bulb.

07tl-s6spd

iTrader: (1)

tl blinkers are way better than the tsx....

smsTL

iTrader: (1)

haha ancient thread, check out the date. lol