anyone know how to install a 2007 Acura TL Coolant Reservoir? any diy?

 

it bolts to the fans.

two bolts on either side of the HOT line

 

oh that simple...any recommeds on a replacement?mi seen diffent types on google search for my camr inculding stainless steel ones

 

whats wrong with OEM?

 

does yours have a hole in it!?!??!?

 

long story, short cap is glued stuck to tank tried to replace cap but only top part of cap comes off and screw on prt still stuck

 

I would just use a factory reservoir.

try a junk yard for a cheap one.


There might be three bolts.
one on each side of the HOT line. and one below forming a triangle.

 

i seen some here:
http://www.partstrain.com/store/?N=0...nt%20Reservoir)

and here:

http://74.6.117.48/search/srpcache?e...FlMKsghl_ouQ--

 

so those stainless steel ones are nothing special?

 

the partstrain website just gives general reservoirs....none that will physically fit the TL


you will need a reservoir that physically fits and mounts to the same mounting points.
A stock one from the factory/dealership will do.

 

the part you are looking for is #1 in the diagram.

I went to Acuraoemparts.com
and found this under the "RADIATOR HOSE" tab.
it sells for $11.34

 

oem like this?

http://www.partsgeek.com/catalog/200...sion_tank.html

 

yes, but that one is $18!!! plus shipping.

Acuraoemparts.com
11.34 plus shipping.

 

ok ok i see thanks for all your help!!

 

just an fyi there is only one screw and its not in the picture but easy to get off, and if you get a tank you have to get the cap seprate