xtcnrice's bwp cu2
#121
ROTAREDOM
Those guys are dead
#123
Racer
when i first got here they used to post a lot but now their accounts have pretty much 0 activity. you got me an bel atleast
Last edited by waaasobe; 12-07-2014 at 02:04 PM.
The following users liked this post:
xtcnrice (12-07-2014)
#124
ROTAREDOM
I think me and MCyoungboy are the only ones left from the OG that still post here in the 2G section.
I was around when Kowloonsniperhk was cleanest CBP TSX out there. He was praised for making the DIY clear headlights mod haha. Now he owns Savclaudes old bumpers haha.
I was around when Kowloonsniperhk was cleanest CBP TSX out there. He was praised for making the DIY clear headlights mod haha. Now he owns Savclaudes old bumpers haha.
The following 2 users liked this post by ssjoeboe9:
MC MiYoung3269 (12-07-2014),
xtcnrice (12-07-2014)
#125
VTEC just kicked in, yo!
Thread Starter
Did you ever figure out your headlight jizz problem?
#126
ROTAREDOM
Starbrite marine polish! No sanding necessary and you can do both lights in about 5 min. They look amazing afterwards!!
The following users liked this post:
xtcnrice (12-08-2014)
#127
TSX AMG Type //M i-VVT
I'm not so sure that jizzing on your headlights is a good idea
The following 2 users liked this post by iCrap:
MC MiYoung3269 (12-09-2014),
xtcnrice (12-08-2014)
#129
VTEC just kicked in, yo!
Thread Starter
Nope, I decided against chopping up my stock exhaust and putting in a large aftermarket resonator. Going to wait it out until late next year and get a catback exhaust. I'm hoping the aftermarket catback itself will eliminate the rasp... but depending on which exhaust, it could be a gamble. I'm very interested in the Fujitsubo Legalis R, but I haven't seen/heard of anyone running that with the RV6 PCD. If it still ends up being raspy... I could replace the Fujitsubo resonator with custom piping and a Vibrant resonator. I wouldn't have to cut the Fujitsubo exhaust this way, because the resonator part of the catback is its own separate part with flanges before the mid muffler, so it'd be like interchanging the parts. I'd likely just leave it alone at that point though... I'm sure the added sound from the Fujitsubo should complement the RV6 PCD's rasp, rather than make it worse. I could also get the RV6 catback instead if it gets released, is cheaper than the Fujitsubo, and sounds good.
The following users liked this post:
914TSX (12-08-2014)
The following users liked this post:
xtcnrice (12-08-2014)
#131
Race Director
iTrader: (8)
#133
Instructor
Met Mr.NC and Speedracer on the meet in spring 2013 but I havent been out to a meet since then.
I see NC's car around Milton but never bumped in to him otherwise.
I see NC's car around Milton but never bumped in to him otherwise.
#135
ROTAREDOM
Bro just look at Ed. He sucked the forum dry of information, won an award and a magazine spread then just bailed. what a horrible person.
The following 2 users liked this post by ssjoeboe9:
MC MiYoung3269 (12-14-2014),
xtcnrice (12-14-2014)
#136
#137
Everyday I'm rofling
The following 3 users liked this post by opboarding:
#139
Unregistered Member
Xtc modulo rear would complete the look!
The following users liked this post:
xtcnrice (12-17-2014)
#140
VTEC just kicked in, yo!
Thread Starter
The modulo sides cost $395 USD, taxes/shipping in from Curry Acura. Great guys, and best price I found for a brand new set.
I know!!! I want it so badly... but I spent too much this year! . I like the modulo rear more than the front.. so I think the SE/Type-S front under spoilers with modulo sides/rear would be the perfect look for me. Plus... if I got the modulo front, I'd need a new grille
#141
Unregistered Member
I like both the SE and Modulo fronts, the SE rear on the other hand, not so much.
The following users liked this post:
dave_88 (12-18-2014)
#144
Racer
#145
ROTAREDOM
Your gf gunna be like "Fujitsubo better be a type of engagement ring!"
The following users liked this post:
xtcnrice (01-29-2015)
#147
VTEC just kicked in, yo!
Thread Starter
VMR V710 in Gunmetal
18x9.5 +45 all around w/ 15mm spacers in the rear (starting from page 3)
5x120, professionally redrilled to 5x114.3 to fit our cars as the 18" V710s don't come in 5x114.3
235/40/18 Hankook Ventus V12 Evo
#148
Unregistered Member
We wanna know the new setup you secretive ahole!
The following users liked this post:
xtcnrice (01-29-2015)
#149
Don't worry. Canadians can't keep a secret. Ask Pam Anderson
The following 2 users liked this post by 2012wagon:
MC MiYoung3269 (02-01-2015),
xtcnrice (01-29-2015)
#151
ROTAREDOM
Imagine how I feel everyday....
#153
Unregistered Member
The following 2 users liked this post by Harper:
MC MiYoung3269 (02-01-2015),
xtcnrice (01-30-2015)
#154
ROTAREDOM
#156
Unregistered Member
The following 2 users liked this post by Harper:
MC MiYoung3269 (02-01-2015),
xtcnrice (01-30-2015)
#158
ROTAREDOM
Ok ok I'll tell you guys.. We got a new keurig at work
#160
ROTAREDOM