2G TSX Chat, Chit, and General Info Thread
Drifting
^ mine started to bubble
too lazy to redo it
![Frown](https://acurazine.com/forums/images/smilies/frown.gif)
![Tomato](https://acurazine.com/forums/images/smilies/tomato.gif)
Burning Brakes
Some people just don't get it...
https://www.facebook.com/photo.php?v=763390420362060
https://fbcdn-sphotos-d-a.akamaihd.n...49126685_n.jpg
https://www.facebook.com/photo.php?v=763390420362060
https://fbcdn-sphotos-d-a.akamaihd.n...49126685_n.jpg
The following users liked this post:
rawger (05-08-2014)
Three Wheelin'
VTEC just kicked in, yo!
Anyone from Florida that's in Toronto right now? For the past couple of days going to work, I've been seeing a grey wagon with (ebay?) headlights and Honda badges with FL plates in Toronto's west end. Definitely caught my eye since the wagon isn't sold up here.
Three Wheelin'
![](http://cdn.memegenerator.net/instances/500x/49601750.jpg)
The following users liked this post:
xtcnrice (05-08-2014)
TSX AMG Type //M i-VVT
TSX AMG Type //M i-VVT
This is all I need for installing new springs, right?
http://www.harborfreight.com/macpher...set-61654.html
http://www.harborfreight.com/macpher...set-61654.html
Drifting
Unregistered Member
This thread seems dead.
ROTAREDOM
Im alive! I've been enjoying enjoying the "In-Between" life of college graduate and full time employee.
There's been a lot of drinking involved!
Crabby- Although you've given up drinking, I believe if we ever crossed paths we would be good drinking buddies! Annnnd more importantly good "yellow cab" buddies!
There's been a lot of drinking involved!
Crabby- Although you've given up drinking, I believe if we ever crossed paths we would be good drinking buddies! Annnnd more importantly good "yellow cab" buddies!
Im alive! I've been enjoying enjoying the "In-Between" life of college graduate and full time employee.
There's been a lot of drinking involved!
Crabby- Although you've given up drinking, I believe if we ever crossed paths we would be good drinking buddies! Annnnd more importantly good "yellow cab" buddies!
There's been a lot of drinking involved!
Crabby- Although you've given up drinking, I believe if we ever crossed paths we would be good drinking buddies! Annnnd more importantly good "yellow cab" buddies!
Three Wheelin'
Well Community was canceled and I haven't seen TSXy around the past few days. Anyone have him on a suicide watch?
The following users liked this post:
Jaheri_cbp (05-10-2014)
ROTAREDOM
TSX AMG Type //M i-VVT
Do any of you guys have LEDs in your fogs? I bought 2 different ones but they don't fit.... if anyone has them installed, what did you buy?
TSX AMG Type //M i-VVT
Unregistered Member
^ I don't.
Itz JDM y0!
![Yuck](https://acurazine.com/forums/images/smilies/yuck.gif)
Can't believe people actually do this "Hellaflush" crap to these cars..
Burning Brakes
The following users liked this post:
rawger (05-10-2014)
TSX AMG Type //M i-VVT
According to this fucktard , I'm an idiot for buying a FlashPro and a swaybar, but putting the wheels out at a 45 degree angle is totally a better idea than something which is actually functional and adds to the car... hmmm.. k..
Graphite Ghost
iTrader: (2)
That not only is ridiculous......just is.
But he drives 2000 miles a year ..... He could probably forego wheels and just roll on rotors.
Its like my wheels...... I got them cheap cause they are not Stance' or Poke capable lol. Forged wheels new inbox for half price.
A real modder is doing it with your hands your sweat your tears ....... Not paying somebody else to do it. All that proves is you might have money....but you have no skills or even the passion to try or learn.
iCrap that is correct spring tool. You can borrow it from most auto parts for free with small deposit.
Something like that I prefer non HF. Worry about it breaking.
I can say I installed all mods except where it doesn't make sense or special tools.
Steer and Stop Shop for alignment after I installed camber kit.
Assortment of wheel and tire mounting and unmounting from wheels. I have installed or removed the wheels from wagon but shop puts on/take off from rims.
Muffler shop to weld in Resonator after I installed RV 6 pipe.
It been to the stealer twice since new. Both times for a smell in a/c. I got 2 wall jobs (park it near the wall and forget it) so finally fixed it myself.
Second time they bring me the wagon with "I" lit up.
5lbs of air in right front. I went beserk. Not their fault tire was flat.......it was a nail. But the fact that they didn't warn me made me insane. I actually got to speak to GM.
Ask me what I expected in a nasty tone.... I said all I expected was notification. And maybe some choices after that. You sold me a vehicle with no spare and you hand me m car with 5lbs of air in the tire.
Needless to say I hope I never have to go back
But he drives 2000 miles a year ..... He could probably forego wheels and just roll on rotors.
Its like my wheels...... I got them cheap cause they are not Stance' or Poke capable lol. Forged wheels new inbox for half price.
A real modder is doing it with your hands your sweat your tears ....... Not paying somebody else to do it. All that proves is you might have money....but you have no skills or even the passion to try or learn.
iCrap that is correct spring tool. You can borrow it from most auto parts for free with small deposit.
Something like that I prefer non HF. Worry about it breaking.
I can say I installed all mods except where it doesn't make sense or special tools.
Steer and Stop Shop for alignment after I installed camber kit.
Assortment of wheel and tire mounting and unmounting from wheels. I have installed or removed the wheels from wagon but shop puts on/take off from rims.
Muffler shop to weld in Resonator after I installed RV 6 pipe.
It been to the stealer twice since new. Both times for a smell in a/c. I got 2 wall jobs (park it near the wall and forget it) so finally fixed it myself.
Second time they bring me the wagon with "I" lit up.
5lbs of air in right front. I went beserk. Not their fault tire was flat.......it was a nail. But the fact that they didn't warn me made me insane. I actually got to speak to GM.
Ask me what I expected in a nasty tone.... I said all I expected was notification. And maybe some choices after that. You sold me a vehicle with no spare and you hand me m car with 5lbs of air in the tire.
Needless to say I hope I never have to go back
Last edited by robpp; 05-10-2014 at 01:02 PM.
Drifting
Why my TSX hasn't had much love lately.... ![Ninja](https://acurazine.com/forums/images/smilies/ninja.gif)
![Ninja](https://acurazine.com/forums/images/smilies/ninja.gif)
![](https://farm6.staticflickr.com/5501/13966966039_567b8aee44_b.jpg)
The following 2 users liked this post by MC MiYoung3269:
justnspace (05-10-2014),
VR1 (05-10-2014)
Three Wheelin'
According to this fucktard , I'm an idiot for buying a FlashPro and a swaybar, but putting the wheels out at a 45 degree angle is totally a better idea than something which is actually functional and adds to the car... hmmm.. k..
![Shrug](https://acurazine.com/forums/images/smilies/shrug.gif)
The following users liked this post:
HHCZ (05-11-2014)
TSX AMG Type //M i-VVT
Yeah i just don't understand it.
back to my other question tho... anybody have LEDs in their fogs? I bought H11 LED bulbs but they just don't fit...
back to my other question tho... anybody have LEDs in their fogs? I bought H11 LED bulbs but they just don't fit...
TSX AMG Type //M i-VVT
Well not only that but it seems like the H11 bulbs I have are not even correct.
If you look here in this picture you can see that the ring that you twist in seems in a different spot than say... this one http://www.ebay.com/itm/130690296985
But which is the right one? it's so confusing.
I may take out the useless ring. are the fog glass covers glued on? or screwed?
If you look here in this picture you can see that the ring that you twist in seems in a different spot than say... this one http://www.ebay.com/itm/130690296985
But which is the right one? it's so confusing.
I may take out the useless ring. are the fog glass covers glued on? or screwed?
Itz JDM y0!
Are those RPF01's on the Racevan?
Moderator
iTrader: (1)
lowered my car today.
not happy with front, will mess with it tomorrow.
The following 2 users liked this post by justnspace:
MC MiYoung3269 (05-10-2014),
VR1 (05-10-2014)
TSX AMG Type //M i-VVT
Looks great, but it would look even better if you cambered the wheels out 90 degrees from the body. stance yo.
Moderator
iTrader: (1)
![](https://acurazine.com/forums/attachments/texas-319/21178d1398580940-official-houston-thread-image.jpg)
like my 21 year old friend in the Houston crew?
The following 2 users liked this post by justnspace:
MC MiYoung3269 (05-10-2014),
VR1 (05-10-2014)
TSX AMG Type //M i-VVT
no no. you need MORE. so much camber that you don't even ride on the tire.. just the rim!
ROTAREDOM
Well not only that but it seems like the H11 bulbs I have are not even correct.
If you look here in this picture you can see that the ring that you twist in seems in a different spot than say... this one http://www.ebay.com/itm/130690296985
But which is the right one? it's so confusing.
I may take out the useless ring. are the fog glass covers glued on? or screwed?
If you look here in this picture you can see that the ring that you twist in seems in a different spot than say... this one http://www.ebay.com/itm/130690296985
But which is the right one? it's so confusing.
I may take out the useless ring. are the fog glass covers glued on? or screwed?
TSX AMG Type //M i-VVT
Can you link to the exact one you got? I've already bought 2 pairs and they don't fit... want to be sure this time.
Itz JDM y0!
The following 2 users liked this post by VR1:
iSeeYouTwo (05-11-2014),
MC MiYoung3269 (05-10-2014)
Drifting
Well not only that but it seems like the H11 bulbs I have are not even correct.
If you look here in this picture you can see that the ring that you twist in seems in a different spot than say... this one http://www.ebay.com/itm/130690296985
But which is the right one? it's so confusing.
I may take out the useless ring. are the fog glass covers glued on? or screwed?
If you look here in this picture you can see that the ring that you twist in seems in a different spot than say... this one http://www.ebay.com/itm/130690296985
But which is the right one? it's so confusing.
I may take out the useless ring. are the fog glass covers glued on? or screwed?
The following users liked this post:
iCrap (05-10-2014)
VTEC just kicked in, yo!
ROTAREDOM
Are they supposed to go into the bulb hole? My LED's stop right at the edge..
I looked a while back and I can't remember the part number for them. I think there might be a picture in the DIY: Resistors for Switchbacks.
Maybe you can get an idea of what they look like?
I looked a while back and I can't remember the part number for them. I think there might be a picture in the DIY: Resistors for Switchbacks.
Maybe you can get an idea of what they look like?
TSX AMG Type //M i-VVT
The bulb ring thing is stopping me from putting them in all the way. Yours must be shorter?
Three Wheelin'
The following 2 users liked this post by rawger:
MC MiYoung3269 (05-11-2014),
ssjoeboe9 (05-11-2014)