So I hit the jackpot on my dashboard lights because, CE, TCS and MR light are all on. I went to an autozone to get it read and the cpu reader bracket is broken and it will not connect to the diagnostic machine until I can get it secured. Someone please help out a noob. Thanks in advance. (99 tl)

 

Well the only thing you can do is remove the center console to get to it and try to reattach it or find a way to.

 

my tl has the same problem. i use long needle nose pliers and pull it back into the bracket and then gently plug the scanner in.

 

You can pull that plastic piece under the coin tray and feel around in there for the OBDII port. Hold onto the back of the gray female connector and plug in the code reader.