Brake issue
08-14-2014 | 01:47 PM
#41
Moderator
Joined: Jan 2009
Posts: 6,509
Likes: 1,017
From: Baja, México.
Is it me, or does the ABS modulator/pump on the 1999's (or all years without VSA) not have an accessible plate cover to change the fluid in it? See page 19-192 in the factory service manual.
The ABS pumps are like page 19-103 for the 1999's, while years with VSA have what's on page 19-191 correct?
The ABS pumps are like page 19-103 for the 1999's, while years with VSA have what's on page 19-191 correct?
^^ Yup the old Pump doesn't have it! but that's not a plate to change fluid, it has a small protective screen to catch garbage. That its the only purpose.
Last edited by Skirmich; 08-14-2014 at 01:51 PM.
08-15-2014 | 12:11 AM
#43
Moderator
Joined: Jan 2009
Posts: 6,509
Likes: 1,017
From: Baja, México.
^ Yah though is not made for that if you open that little sucker you add air between the Reservoir and the ABS Pump which is NOT COOL! My advice would be..
If you are flushing the entire system, Open that sucker and clean the screen then Flush the Brake Fluid. DON´T OPEN IT AFTER THE FLUSH.
If you are flushing the entire system, Open that sucker and clean the screen then Flush the Brake Fluid. DON´T OPEN IT AFTER THE FLUSH.
Thread
Thread Starter
Forum
Replies
Last Post
mada51589
3G TL Problems & Fixes
79
05-03-2022 08:54 PM
