(If this is in the wrong sec. mods plz move..)

So I'm wanting to play around with the TL a bit, but am having a hard time finding some goodies. Unlike a Civic or Integra, parts don't seem to be a dime a dozen. Or is it?

Some sites have sections dedicated to the UA5, but others don't. And they don't usually list a lot of parts. I know some suspension parts from a 98 - 02 Accord will fit, is it also true for other parts?

Just wanting to see what other compatible parts from the Accord will fit our cars (ie. coilovers? strubars? brakes? catbacks? etc.). Or if there are other sites that have a good selection of parts for TLs (heeltoe..)

Thanks-

 

pretty good question to ask. i'm sure some veterans on this website will chime in

 

Coilovers yup, strutbars yup, not sure about brakes but 90% positive yes, and catbacks yes with modification.

98-02 Accord sedans and our cars are built on the same platform. Many of the mechanical parts are interchangeable, especially suspension. Accord V6 headers, pulleys, etc can also be swapped.

 

^good to know...i knew suspension was interchangable but didnt know engine parts were as well

 

Have you tried HERE

 

 

are the intakes compatible as well? and if they are is it only the V6 one?

 

If it is then the V6 one would be the only one since your engine is a V6.

Also try eBay for parts.

 

alrite cool...i kinda figured the V6 one would fit but wasnt sure...but Gracias Señor for the info..

 

x2

Good to know. So v6 performance mods - ok. Suspension - ok. Stupid question, but does it have to be the v6 sedan platform?

 

usually yes. Not ALL Accord v6 parts are going to work, so dont start buying CAI's for an accord if you aren't sure it will work.

 

x2

 

doesnt hurt to know we can fall back on certain accord parts

 

Awesome input guys. Hopefully other memebers can post some of their parts they used from a Accord.

Now I need to figure out how to get a A-Spec wing =S

 

good luck....finding an OEM or JDM is getting harder and harder by the day and when you do find them, they wanna charge you an arm and leg...and replicas has some fitment issues as well :-/ it's a sticky situation....

 

the intakes dont work on the typeS without modification but nothing a hacksaw cant fix

 

I'd be happy with a replica and deal with fitment issues on that! Where can I find one? I wanted to entertain myself one day and decided to go by my Acura dealership just to see how much the A-Spec wing would cost if I ordered from there..
.
$1300 CAD!

WW is looking pretty good at this point haha Actually there's another dealership here selling a genuine OEM wing for $250 prepainted, think I should just jump on that?