2005 RL Motor Mount
#1
2005 RL Motor Mount
I searched the forum for this but I couldn't find any so I apologize if this has been already answered.
My 2005 RL failed the Virginia inspection due to bad motor mounts (front and rear according to the inspector at Firestone).
Since I was laid off a few months ago, I need to conserve my funds as much as possible although I wouldn't skimp if needed.
So, here are the first questions. I've seen that the OEM mounts cost about $160 online, give or take a few dollars. I have also seen the items on ebay for a lot less...something like $160 for both front and rear. What are your thoughts on these ebay parts?
Also, I've seen "DEA" parts - any thoughts on these?
Firestone quoted me about $350 for labor to do both - sounds reasonable or could I negotiate down?
FYI, I am in Tysons Corner/Arlington/McLean, Virginia area.
Thank you in advance!
My 2005 RL failed the Virginia inspection due to bad motor mounts (front and rear according to the inspector at Firestone).
Since I was laid off a few months ago, I need to conserve my funds as much as possible although I wouldn't skimp if needed.
So, here are the first questions. I've seen that the OEM mounts cost about $160 online, give or take a few dollars. I have also seen the items on ebay for a lot less...something like $160 for both front and rear. What are your thoughts on these ebay parts?
Also, I've seen "DEA" parts - any thoughts on these?
Firestone quoted me about $350 for labor to do both - sounds reasonable or could I negotiate down?
FYI, I am in Tysons Corner/Arlington/McLean, Virginia area.
Thank you in advance!
#4
Suzuka Master
iTrader: (1)
bastards.... you had 14 days left.
Ok... lets break this down. You get what you pay for, you go cheap and you will likely need them again next year (or sooner)
The root of your issue is that you are going to a shop that failed you for motor mounts to begin with. :lol:
350 isnt bad, but I can assure you that isnt OEM parts... The good mounts alone are 280 and labor should be closer to 500.
In short... I would get a second opinion.
Ok... lets break this down. You get what you pay for, you go cheap and you will likely need them again next year (or sooner)
The root of your issue is that you are going to a shop that failed you for motor mounts to begin with. :lol:
350 isnt bad, but I can assure you that isnt OEM parts... The good mounts alone are 280 and labor should be closer to 500.
In short... I would get a second opinion.
#5
Senior Moderator
That's a BS inspection item if you ask me.
The following users liked this post:
HEAVY_RL (01-20-2015)
#6
Yes, that's what I thought too so I went to the VA State Police website and they have "engine mount" as one of the items to be inspected. BS or not, it's there so I need to live with it.
I just ordered the OEM parts (front and rear) so I will shop around for installation. Any suggested mechanic in this area (N. VA...Tysons, McLean, Arlington, Falls Church area)?
Thanks for you suggestions and comments.
And, for anyone who cares, just got new tires - Continental PureContact with Ecoplus from Tirerack. So far so good....
I just ordered the OEM parts (front and rear) so I will shop around for installation. Any suggested mechanic in this area (N. VA...Tysons, McLean, Arlington, Falls Church area)?
Thanks for you suggestions and comments.
And, for anyone who cares, just got new tires - Continental PureContact with Ecoplus from Tirerack. So far so good....
#7
Senior Moderator
There is a Regions forum for local contacts.
Trending Topics
#9
Former Sponsor
We sell our XLR8 motor mounts for $300 for the set, they will work with the J35A8 engine.
XLR8 Engine Mounts - Excelerate Performance - Japanese and European Performance Specialists!!
XLR8 Engine Mounts - Excelerate Performance - Japanese and European Performance Specialists!!
#10
We sell our XLR8 motor mounts for $300 for the set, they will work with the J35A8 engine.
XLR8 Engine Mounts - Excelerate Performance - Japanese and European Performance Specialists!!
XLR8 Engine Mounts - Excelerate Performance - Japanese and European Performance Specialists!!
Will those mounts work with the RL?
#11
Senior Moderator
#13
Former Sponsor
#15
Senior Moderator
The following users liked this post:
ExcelerateRep (01-23-2015)
#16
Senior Moderator
:wink:
(NVH = Noise, Vibration, & Harshness for the others as unsure as I was)
#17
Former Sponsor
iTrader: (1)
Nice link!
I don't see why we could not get Innovative to make a bespoke right side bracket for the RL if people wanted it. We are fairly close to them.
This is what I was talking about though:
The car isn't going to be a luxury car with poly mounts in it. Innovative, XLR8, whatever. They transmit more vibes and noise, so the strength comes at a cost.
I don't see why we could not get Innovative to make a bespoke right side bracket for the RL if people wanted it. We are fairly close to them.
This is what I was talking about though:
Originally Posted by Blazing GT
The car vibrates when it is idling still. Before buying innovative mounts I knew they vibrate but I didnt think it was this much lol.
The following users liked this post:
oo7spy (01-23-2015)
#18
Senior Moderator
![Popcorn](https://acurazine.com/forums/images/smilies/popcorn.gif)
#19
Former Sponsor
iTrader: (1)
I dunno what that means. Its tha truth. There isn't one person who can factually claim that the aftermarket mounts don't cause extra noise and vibration.
This is on my TSX, but the same would apply to a TL:
https://www.heeltoeauto.com/tech-articles/innovative-engine-mount-vibration-test-k-series-engine.html
Stock (with a broken right side mount mind you) versus Poly:
This is on my TSX, but the same would apply to a TL:
https://www.heeltoeauto.com/tech-articles/innovative-engine-mount-vibration-test-k-series-engine.html
Stock (with a broken right side mount mind you) versus Poly:
![](http://heeltoeauto.com/gallery/var/albums/HTSpec-TSX/vibration_test.jpg)
The following users liked this post:
ExcelerateRep (01-23-2015)
#20
Senior Moderator
The popcorn means I am interested in how this thread unfolds. "I got my popcorn ready."
The 2G RL could use some serious aftermarket love, and I would like to see more, especially from AZ Vendors.
BTW, what are the axes in your plot?
The 2G RL could use some serious aftermarket love, and I would like to see more, especially from AZ Vendors.
BTW, what are the axes in your plot?
#21
Former Sponsor
![Tomato](https://acurazine.com/forums/images/smilies/tomato.gif)
They do break in a bit after a few thousand miles, and most people report the vibrations are usually at idle.
The following users liked this post:
oo7spy (01-23-2015)
#23
Pro
Front and top Motor Mounts
I know this has had some long discussion and I am not having any luck with the search feature as it brings up all the models.
The mechanic looked my car over today and said I need a new front mount and the top mount is cracking. I know someone said that the top mount is has a replacement part from another model that will last longer and just as good as the original.
The front mount is shot. I looked on Amazon and they have this part...DEA A4526HY Front Engine Mount. The cost is around $50. Will this work? Or am I looking at a headache?
Acura Parts Warehouse has both factory mounts for around $300.
Suggestions please.
The mechanic looked my car over today and said I need a new front mount and the top mount is cracking. I know someone said that the top mount is has a replacement part from another model that will last longer and just as good as the original.
The front mount is shot. I looked on Amazon and they have this part...DEA A4526HY Front Engine Mount. The cost is around $50. Will this work? Or am I looking at a headache?
Acura Parts Warehouse has both factory mounts for around $300.
Suggestions please.
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
#24
Senior Moderator
Use the "search this forum" toolbar in the top right corner of the main forum page.
#26
Pro
Front Motor Mount
Can a new front motor mount be installed with out removing the radiator? I looked and it appears to be a very cramped space with out taking out the radiator. (my mount is broke)
Also what mount is recommended for the front and top mount? Someone said that the TL mount is better?
Also what mount is recommended for the front and top mount? Someone said that the TL mount is better?
#28
Pro
Motor Mount Source?
I have a broken front motor mount and the upper is starting to crack. I could spend hours digging down through old threads but I really don't have that much interest in doing that.
I looked on EBay for parts and Amazon but it all looks to be confusing as to who to buy them from. I could buy them from Tempe Acura for $421, however I really don't think I need to lay out that much cash.
The front one is a gel mount and has a vacuum fitting on it. There are replacements with out the fitting. Does it make a difference?
Who is a reputable source to go to for these motor mounts at a reasonable price? I would think that I could get a replacement set for under $200?
I looked on EBay for parts and Amazon but it all looks to be confusing as to who to buy them from. I could buy them from Tempe Acura for $421, however I really don't think I need to lay out that much cash.
The front one is a gel mount and has a vacuum fitting on it. There are replacements with out the fitting. Does it make a difference?
Who is a reputable source to go to for these motor mounts at a reasonable price? I would think that I could get a replacement set for under $200?
#30
Pro
How have the results been? Look like stock parts and fit right in with out any issues? I would not be a happy camper if I got involved putting these in only to find out they didn't work. I went through that mess with the axles.
#31
Senior Moderator
You know what's stupid about foregoing a search and making a new thread? The information is already here, and you are opting to ignore it in hopes that someone will come along and say it again which may not happen.
You know what's also stupid? Starting your third thread on the same topic. I merged all three into an appropriate thread with vendor options. It took me an entire 3 minutes to find all 4 on an iPhone.
You know what's also stupid? Starting your third thread on the same topic. I merged all three into an appropriate thread with vendor options. It took me an entire 3 minutes to find all 4 on an iPhone.
#32
Burning Brakes
Where are the motor mounts located and are they easy to visually inspect?
Is this an easily done diy?
What are the symptoms of bad mounts?
I've got 112k on the clock and I keep reading about people having issues of them failing.
Is this an easily done diy?
What are the symptoms of bad mounts?
I've got 112k on the clock and I keep reading about people having issues of them failing.
#33
Side mount is easily accessible from the passenger side of the engine. Front mount is not so easy.
#34
Burning Brakes
I'll Check, thx. Honda dealer wants $1,050 for front and sides, Acura dealer wants $970. These seem pretty outrageous. How much are OEM parts only? I'm assuming a non-dealer mechanic can easily do the job?
#35
OEM Acura parts will be several hundreds of dollars. You can go the route I went which was order the front and side mounts from RockAuto. The parts ran me $83 shipped and are OEM quality.
#38
Burning Brakes