Just another CL... nothing special... (pic heavy)
#1
Thread Starter
Glacier Frost Mica CL-S
iTrader: (1)
Joined: Apr 2006
Posts: 2,168
Likes: 24
From: Dallas, TX
Just another CL... nothing special... (pic heavy)
I haven't really posted any pictures of this car since i got it about almost 2 years ago. so here it goes.. from beginning till now
started life as a 2001 CL-S
Picked up some used HKS Super Draggers and Cleaned the shit out of them
Of couse i had to be as cool as all the other kids and get comptech headers and them get them ceramic coated alomg with a XLR8 HFC
Got the UR underdrive pulleys installed
Did the 6 speed handbrake conversion along with the RSX Wheel
Installed the Tein SS
Did a RL BBK conversion
Installed a SPC F&R Camber kit
Molded the Rear bumper
Installed the Torque Damper and Neuspeed Strut Bar
Car got painted Glacier Frost Mica
SO MUCH MORE... and im already tired so ill add more pix later but here is the final Product.
started life as a 2001 CL-S
Picked up some used HKS Super Draggers and Cleaned the shit out of them
Of couse i had to be as cool as all the other kids and get comptech headers and them get them ceramic coated alomg with a XLR8 HFC
Got the UR underdrive pulleys installed
Did the 6 speed handbrake conversion along with the RSX Wheel
Installed the Tein SS
Did a RL BBK conversion
Installed a SPC F&R Camber kit
Molded the Rear bumper
Installed the Torque Damper and Neuspeed Strut Bar
Car got painted Glacier Frost Mica
SO MUCH MORE... and im already tired so ill add more pix later but here is the final Product.
Last edited by INSPIRE 32V; 07-31-2012 at 02:53 AM.
#7
Handbrake conversion is SO COOL !! Did you have to steal that from a manual car or did you buy that and do it yourself ? I would think re routing the handbrake would be quite hard.
Trending Topics
#10
Thread Starter
Glacier Frost Mica CL-S
iTrader: (1)
Joined: Apr 2006
Posts: 2,168
Likes: 24
From: Dallas, TX
thanks for all the kind words, i was going to do the non navi to navi but never did and just been too lazy to take the center console apart to take it out.
The handbreak parts were all purchased new and that empty spot for the seat heaters has been bugging me like crazy..
all the work was done by me (minus the paint job) but a good friend helped me alot with the bumpers
The handbreak parts were all purchased new and that empty spot for the seat heaters has been bugging me like crazy..
all the work was done by me (minus the paint job) but a good friend helped me alot with the bumpers
Last edited by INSPIRE 32V; 07-31-2012 at 03:26 PM.
#17
#21
Thread Starter
Glacier Frost Mica CL-S
iTrader: (1)
Joined: Apr 2006
Posts: 2,168
Likes: 24
From: Dallas, TX
thanks everyone,
as far as how much, its hard to say i lost track a long time ago but i do feel it was well spent.
I will include a full list of everything done in the past 12 months to give u an idea i guess
as far as how much, its hard to say i lost track a long time ago but i do feel it was well spent.
I will include a full list of everything done in the past 12 months to give u an idea i guess
#22
Thread Starter
Glacier Frost Mica CL-S
iTrader: (1)
Joined: Apr 2006
Posts: 2,168
Likes: 24
From: Dallas, TX
Just got done replacing all the studs on the car as well as the front ball joints and also installed some black Gorilla Lug Nuts.
Car is parked at a angle so the front is lifted up a bit in the pictures, enjoy
Just in case someone is wondering (because i was before i did the bbk upgrade) after using a 5mm Spacer in the front, this is the kinda gap you get for clearance.
Car is parked at a angle so the front is lifted up a bit in the pictures, enjoy
Just in case someone is wondering (because i was before i did the bbk upgrade) after using a 5mm Spacer in the front, this is the kinda gap you get for clearance.
#23
Thread Starter
Glacier Frost Mica CL-S
iTrader: (1)
Joined: Apr 2006
Posts: 2,168
Likes: 24
From: Dallas, TX
Mod List
2001 CL-S
Glacier Frost Mica Paint Job.
Molded TL Lipkit.
RL Big Brake Kit.
EBC Rotors.
EBC Green Stuff Pads.
Russell SS Brake Lines.
SPC Camber Kit.
Tein SS.
Ichiba V1 Spacers.
Gorilla Lugs.
Neuspeed Strut Bar.
Clear Brake Light.
Ingalls Stiffy.
UR Light Weight Pulley Set.
VIS CF Hood.
CF Fuel Door.
Ceramic Coated Comptech Headers.
XLR8 High Flow Cat.
HKS Super Dragger Exhaust.
AEM CAI.
Roof Spoiler.
03 Headlights & Taillights.
03 Side Mirrors.
03 Complete Interior Swap.
03 Bumper Inserts.
6 SPD Handbrake.
07 TL CF Shift Knob.
S2k Steering Wheel.
RSX Airbag.
Escort 8500 Red.
RJ Legends 19" Front & 20" Legends Type II Rear, Custom Powder Coated.
Falken FK 452 235/35/19 Front & 235/30/20 Rear.
Complete Interior LED Bulbs.
LED Reverse Bulbs.
Philips 6000k Ultinon Bulbs.
20% Tint All Around
No Front Plate.
Debadged.
Grill Powder Coated Black.
and im sure im missing things in there
2001 CL-S
Glacier Frost Mica Paint Job.
Molded TL Lipkit.
RL Big Brake Kit.
EBC Rotors.
EBC Green Stuff Pads.
Russell SS Brake Lines.
SPC Camber Kit.
Tein SS.
Ichiba V1 Spacers.
Gorilla Lugs.
Neuspeed Strut Bar.
Clear Brake Light.
Ingalls Stiffy.
UR Light Weight Pulley Set.
VIS CF Hood.
CF Fuel Door.
Ceramic Coated Comptech Headers.
XLR8 High Flow Cat.
HKS Super Dragger Exhaust.
AEM CAI.
Roof Spoiler.
03 Headlights & Taillights.
03 Side Mirrors.
03 Complete Interior Swap.
03 Bumper Inserts.
6 SPD Handbrake.
07 TL CF Shift Knob.
S2k Steering Wheel.
RSX Airbag.
Escort 8500 Red.
RJ Legends 19" Front & 20" Legends Type II Rear, Custom Powder Coated.
Falken FK 452 235/35/19 Front & 235/30/20 Rear.
Complete Interior LED Bulbs.
LED Reverse Bulbs.
Philips 6000k Ultinon Bulbs.
20% Tint All Around
No Front Plate.
Debadged.
Grill Powder Coated Black.
and im sure im missing things in there
The following 2 users liked this post by p.diddy:
civicdrivr (08-02-2012),
StreetKA (08-02-2012)
#31
User Awaiting Email Confirmation
iTrader: (5)
Joined: Nov 2007
Posts: 7,786
Likes: 1
From: San Francisco
Pretty cool man - love the mods and even cooler you did the work. I had bought an RSX steering wheel but the wheel never made it on to the car because I never got clarification about some wiring issue with the airbag. Did you have to do something special to get that combo to work on the 2001 because there's something different on 01 than 03...again all from my failing memory.
The following users liked this post:
civicdrivr (08-08-2012)
#37
Great work! I like what you've done. I wish my cl was as shiny lol. You got one of the nicest looking cl's on here. What's left to do? Seems like you covered almost everything. How hard was the hand brake install?
#38
Very nice car. I only have reservations with the gas door and the wheels look like 2 different sets and the lip on the rear wheels makes them look an inch smaller than the front pair. Does anyone else see this? Eh... maybe it's just me. Loved looking at the diary of mod pics.