Who's getting a Turbo
#81
Suzuka Master
Join Date: Sep 2000
Location: Woodstock, GA
Age: 54
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by allmotor_2000
You can buy mine used...
#82
Suzuka Master
Join Date: Sep 2000
Location: Woodstock, GA
Age: 54
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mrsteve
Greddy E-Manage Engine Management System
- Cost: $500 w/ harness etc.
- Cost: $500 w/ harness etc.
A harness for only $50 (assuming the main unit, Inj and Ign harness and support tool are $450), the material alone is more than double that.
#84
Suzuka Master
Join Date: Sep 2000
Location: Woodstock, GA
Age: 54
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ThinJim
here's a breakdown of what it cost me.
e-greddy 300.00
3 bar map sensor 95.00
sensor harness 27.00
ing. harness 33.00
inj. harness 30.00
support tool 110.00
boost controller 489.00
this was the cheapest i found
e-greddy 300.00
3 bar map sensor 95.00
sensor harness 27.00
ing. harness 33.00
inj. harness 30.00
support tool 110.00
boost controller 489.00
this was the cheapest i found
#85
Instructor
Join Date: Oct 2004
Location: Lake Geneva, WI
Age: 38
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=mrsteve]I listed everything you'll need at the top of page 3.
QUOTE]
I saw that what I was reffering to is that if I could only buy specific parts from there cuz I already have some items. What I would need is:
Turbo manifold w/ turbo mount
Piping for the turbo
Greddy Intercooler
The prices listed are retail but I have also seen other posts with different prices and would like to know how much each of the three items prices seperately. Also I have tried to download some pics of the turbo manifold and intercooler but am unable to. So if any pictures can be sent to igitpd@yahoo.com I would greatly appreciate it. Also if you need time for the parts to be made just let me know how long and how much money u would need as a deposite.
QUOTE]
I saw that what I was reffering to is that if I could only buy specific parts from there cuz I already have some items. What I would need is:
Turbo manifold w/ turbo mount
Piping for the turbo
Greddy Intercooler
The prices listed are retail but I have also seen other posts with different prices and would like to know how much each of the three items prices seperately. Also I have tried to download some pics of the turbo manifold and intercooler but am unable to. So if any pictures can be sent to igitpd@yahoo.com I would greatly appreciate it. Also if you need time for the parts to be made just let me know how long and how much money u would need as a deposite.
#86
Hey Ram, assuming those who running SC with e-Manage would like to get the AUTO turbo kit. Would they just need the following to work?
List:
Garrett GT35R (Ball-Bearing) Turbo- Turbine: 0.82A/R, 68mm 84 Trim wheel
- Compressor: 0.70A/R, 82mm 56 Trim wheel
- Cost: $1400
Garrett High Efficienty Intercooler Core
- 8" x 16" x 3.5"
- Cost: $800
Tial/Garrett 38mm Wastegate
- 6.82psi spring
- Cost: $250 w/ flanges etc.
Tial/Garrett Blow-off Valve
- Cost: $250 w/ flanges etc.
Fuel Hoses/Fittings (Earls)
- Cost: $100
Intake Piping (2.5")
- Cost: $300 w/ clamps, couplers etc.
Turbo Manifold & Downpipe in Stainless Steel
- Cost: $1500
TOTAL: $4600
Is that the only sc guys need in terms of parts to make the turbo work?
I know about transmission and stock CR, I'm curious on mechanical parts.
List:
Garrett GT35R (Ball-Bearing) Turbo- Turbine: 0.82A/R, 68mm 84 Trim wheel
- Compressor: 0.70A/R, 82mm 56 Trim wheel
- Cost: $1400
Garrett High Efficienty Intercooler Core
- 8" x 16" x 3.5"
- Cost: $800
Tial/Garrett 38mm Wastegate
- 6.82psi spring
- Cost: $250 w/ flanges etc.
Tial/Garrett Blow-off Valve
- Cost: $250 w/ flanges etc.
Fuel Hoses/Fittings (Earls)
- Cost: $100
Intake Piping (2.5")
- Cost: $300 w/ clamps, couplers etc.
Turbo Manifold & Downpipe in Stainless Steel
- Cost: $1500
TOTAL: $4600
Is that the only sc guys need in terms of parts to make the turbo work?
I know about transmission and stock CR, I'm curious on mechanical parts.
#87
Suzuka Master
Join Date: Sep 2000
Location: Woodstock, GA
Age: 54
Posts: 9,431
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by av6ent
Hey Ram, assuming those who running SC with e-Manage would like to get the AUTO turbo kit. Would they just need the following to work?
List:
Garrett GT35R (Ball-Bearing) Turbo- Turbine: 0.82A/R, 68mm 84 Trim wheel
- Compressor: 0.70A/R, 82mm 56 Trim wheel
- Cost: $1400
Garrett High Efficienty Intercooler Core
- 8" x 16" x 3.5"
- Cost: $800
Tial/Garrett 38mm Wastegate
- 6.82psi spring
- Cost: $250 w/ flanges etc.
Tial/Garrett Blow-off Valve
- Cost: $250 w/ flanges etc.
Fuel Hoses/Fittings (Earls)
- Cost: $100
Intake Piping (2.5")
- Cost: $300 w/ clamps, couplers etc.
Turbo Manifold & Downpipe in Stainless Steel
- Cost: $1500
TOTAL: $4600
Is that the only sc guys need in terms of parts to make the turbo work?
I know about transmission and stock CR, I'm curious on mechanical parts.
List:
Garrett GT35R (Ball-Bearing) Turbo- Turbine: 0.82A/R, 68mm 84 Trim wheel
- Compressor: 0.70A/R, 82mm 56 Trim wheel
- Cost: $1400
Garrett High Efficienty Intercooler Core
- 8" x 16" x 3.5"
- Cost: $800
Tial/Garrett 38mm Wastegate
- 6.82psi spring
- Cost: $250 w/ flanges etc.
Tial/Garrett Blow-off Valve
- Cost: $250 w/ flanges etc.
Fuel Hoses/Fittings (Earls)
- Cost: $100
Intake Piping (2.5")
- Cost: $300 w/ clamps, couplers etc.
Turbo Manifold & Downpipe in Stainless Steel
- Cost: $1500
TOTAL: $4600
Is that the only sc guys need in terms of parts to make the turbo work?
I know about transmission and stock CR, I'm curious on mechanical parts.
#89
Safety Car
The manifold will be more expensive...
Originally Posted by av6ent
Hey Ram, assuming those who running SC with e-Manage would like to get the AUTO turbo kit. Would they just need the following to work?
List:
Garrett GT35R (Ball-Bearing) Turbo- Turbine: 0.82A/R, 68mm 84 Trim wheel
- Compressor: 0.70A/R, 82mm 56 Trim wheel
- Cost: $1400
Garrett High Efficienty Intercooler Core
- 8" x 16" x 3.5"
- Cost: $800
Tial/Garrett 38mm Wastegate
- 6.82psi spring
- Cost: $250 w/ flanges etc.
Tial/Garrett Blow-off Valve
- Cost: $250 w/ flanges etc.
Fuel Hoses/Fittings (Earls)
- Cost: $100
Intake Piping (2.5")
- Cost: $300 w/ clamps, couplers etc.
Turbo Manifold & Downpipe in Stainless Steel
- Cost: $1500
TOTAL: $4600
Is that the only sc guys need in terms of parts to make the turbo work?
I know about transmission and stock CR, I'm curious on mechanical parts.
List:
Garrett GT35R (Ball-Bearing) Turbo- Turbine: 0.82A/R, 68mm 84 Trim wheel
- Compressor: 0.70A/R, 82mm 56 Trim wheel
- Cost: $1400
Garrett High Efficienty Intercooler Core
- 8" x 16" x 3.5"
- Cost: $800
Tial/Garrett 38mm Wastegate
- 6.82psi spring
- Cost: $250 w/ flanges etc.
Tial/Garrett Blow-off Valve
- Cost: $250 w/ flanges etc.
Fuel Hoses/Fittings (Earls)
- Cost: $100
Intake Piping (2.5")
- Cost: $300 w/ clamps, couplers etc.
Turbo Manifold & Downpipe in Stainless Steel
- Cost: $1500
TOTAL: $4600
Is that the only sc guys need in terms of parts to make the turbo work?
I know about transmission and stock CR, I'm curious on mechanical parts.
#90
Originally Posted by allmotor_2000
The manifold will be more expensive...
#91
Safety Car
Originally Posted by av6ent
How much, $2000-2500? And the list posted ^ is that everything the sc individual would need to make the turbo work (assuming FPR/guages/FPump/e-Manage stay)?
#92
Team Owner
iTrader: (1)
Join Date: May 2003
Location: Leesburg, Virginia
Age: 41
Posts: 36,474
Received 249 Likes
on
175 Posts
Originally Posted by scalbert
A harness for only $50 (assuming the main unit, Inj and Ign harness and support tool are $450), the material alone is more than double that.
Based upon allmotor's previous thread. I :copied: and :pasted:
#94
[QUOTE=Habib]
you autotragic or 6 spd?
Originally Posted by mrsteve
I listed everything you'll need at the top of page 3.
QUOTE]
I saw that what I was reffering to is that if I could only buy specific parts from there cuz I already have some items. What I would need is:
Turbo manifold w/ turbo mount
Piping for the turbo
Greddy Intercooler
The prices listed are retail but I have also seen other posts with different prices and would like to know how much each of the three items prices seperately. Also I have tried to download some pics of the turbo manifold and intercooler but am unable to. So if any pictures can be sent to igitpd@yahoo.com I would greatly appreciate it. Also if you need time for the parts to be made just let me know how long and how much money u would need as a deposite.
QUOTE]
I saw that what I was reffering to is that if I could only buy specific parts from there cuz I already have some items. What I would need is:
Turbo manifold w/ turbo mount
Piping for the turbo
Greddy Intercooler
The prices listed are retail but I have also seen other posts with different prices and would like to know how much each of the three items prices seperately. Also I have tried to download some pics of the turbo manifold and intercooler but am unable to. So if any pictures can be sent to igitpd@yahoo.com I would greatly appreciate it. Also if you need time for the parts to be made just let me know how long and how much money u would need as a deposite.
you autotragic or 6 spd?
Thread
Thread Starter
Forum
Replies
Last Post
joflewbyu2
5G TLX (2015-2020)
139
10-08-2015 11:16 AM