RL Calipers Fit behind 05 TL 17" rims!
The following users liked this post:
termo001 (04-19-2012)
#527
ABP-KBP-CBP & ME
iTrader: (20)
If you bought the calipers for $65 each then you got a great deal they usually cost more and in regards to powdercoating both of those prices you've been quoted are good but just like anything the cheapest isn't always the best.
Last edited by clpassenubye; 04-19-2012 at 10:24 PM.
#528
Three Wheelin'
iTrader: (8)
opps i just seen this ![Why Me](https://acurazine.com/forums/images/smilies/whyme.gif)
I will see you at IA this weekend
That about right. Avg price for paint Caliper is $50-75 each. Also don't for get you will needed buy rebuild kit after powder coating is done. I got OEM ones for $50 each
![Why Me](https://acurazine.com/forums/images/smilies/whyme.gif)
I will see you at IA this weekend
![Tomato](https://acurazine.com/forums/images/smilies/tomato.gif)
Last edited by AznWay; 04-19-2012 at 10:31 PM.
#529
Instructor
sweet guys thanks a lot yeah i got the calipers for $150 shipped to me. i know cheapest is not always the best Im trying to do my research first before i make a decision the biggest thing to me is the color Im so gonna copy Civicdrivr lol i love that color! what is it Candy Blue???
Is this a good site for the rebuild kit?
http://brakeperformance.com/brake-ca...d-.php?did=112
Is this a good site for the rebuild kit?
http://brakeperformance.com/brake-ca...d-.php?did=112
#531
Whats up with RDX owners?
iTrader: (9)
They sent me the 66 to 64.1mm rings, not the larger ones I requested
I kind of gave up on the CL sadly.
![Bored](https://acurazine.com/forums/images/smilies/bored.gif)
#533
Instructor
so what is the center bore of the 2nd gen CL,66 or 64? I need to get some hub centric spacers and I just wanna make sure i get the right ones. the bolt pattern is 5 lug 4.5" (114.3mm) correct? I should be getting my RL calipers back this week maybe tomorrow
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
#534
Whats up with RDX owners?
iTrader: (9)
64.1mm, 5x114.3
The following users liked this post:
termo001 (06-19-2012)
#537
Whats up with RDX owners?
iTrader: (9)
#538
Instructor
so i found a place that powder coated the brakes and bolts as well as polished the ACURA for $60 (even though it not the exact color i wanted,close enough) + $150 i paid for the actual brakes
#539
Instructor
can anyone recommend a good quality brake fluid? I read racing fluids, like ATE Blue, absorb water (which of course lowers the boiling point) much faster than OE grade DOT3 fluids and to use Honda DOT 3/4 brake fluid instead or you run the risk of corrosion. What would you do?
#541
Instructor
#542
https://acurazine.com/forums/car-parts-sale-361/ebc-slotted-rotors-799629/
The thread is closed but pm me if interested.
#543
Registered Member
what is everyone with BBK using for a spare tire? a full size 05' TL wheel? Or maybe a stock CL wheel with spacers? I need to buy something, as I feel quite vulnerable driving around knowing my spare tire is useless with my RL calipers.
#544
Whats up with RDX owners?
iTrader: (9)
3G TL 6MT or Type S spare. Check junkyards.
Bonus! Theyre aluminum, and lighter then the CL-S spare.
Bonus! Theyre aluminum, and lighter then the CL-S spare.
The following users liked this post:
AustinTaper (07-03-2012)
#545
Burning Brakes
iTrader: (4)
What are you guys using to rebuild your calipers? OEM or aftermarket? OEM is around $100 for both whereas aftermarket is much cheaper. Would I have an issue going with aftermarket rebuild kits, let's say from Autozone or RockAuto?
Also.. I currently have XXR 522s (19.8.5 +38).. would I need spacers or will these calipers fit fine?
Also.. I currently have XXR 522s (19.8.5 +38).. would I need spacers or will these calipers fit fine?
Last edited by ArthurL; 07-05-2012 at 12:59 PM.
#547
Suzuka Master
iTrader: (3)
can anyone recommend a good quality brake fluid? I read racing fluids, like ATE Blue, absorb water (which of course lowers the boiling point) much faster than OE grade DOT3 fluids and to use Honda DOT 3/4 brake fluid instead or you run the risk of corrosion. What would you do?
#548
3.5 psi
iTrader: (1)
here's a thread that might help some people
https://acurazine.com/forums/showthr...highlight=RPF1
https://acurazine.com/forums/showthr...highlight=RPF1
The following 2 users liked this post by gnuts:
aznboi2424 (07-06-2012),
civicdrivr (07-06-2012)
The following users liked this post:
gnuts (07-10-2012)
#556
Racer
It does stick out just a bit now but I had no choice, I raised my car up about 1 inch, so it doesn't rub anymore, good thing for coilovers and adjustable dampening
#560
HE>i
iTrader: (1)
^Aegean, ronjon wheels click here