NEVERSUMMER

Very sorry to disapoint you but....

I had my neo installed/dyno tuned and it reset twice just like everyone said it would. I only had it hooked up for 4 days to. gc86 had better luck with his but his just acted up to. Maybe its the way you wire it. I dont think accord----- has had that problem.
--------------------------------

Cant wait to see results of before and after CleanCL.

CleanCL

iTrader: (4)

who said it would reset?

NEVERSUMMER

Most the people on here. They said the ECU learns what changes you made to it using the neo and it would reset. There is at least 10 threads I searched before I bought It that say it. But I thought what the hell, if it does Ill sell it. And it did. So the Dyno tuning I did do with it twice reset itself, and so I yanked.

2CLean

3 of my buddies also have the A'PEXi Neo (2 Honda's, 1 Acura) and have had them for several months with no issues. All of them are using the Boomslang harnesses, so it could be related to wiring.

NEVERSUMMER

I dont know... All the threads I searched said it would do it. And it did.

2CLean

Hmm, weird. Does anyone know if the Neo alters the fuel maps before it goes to the ECU or does it take the readings from the ECU and then applies it's calculations to make the necessary changes? If it's the latter, that would explain the ECU reverting back to the stock maps. Not sure if the Boomslang is wired in such a way to bypass this I guess I'll ask my friends that own it.

edit: sorry for the highjack...back on topic now.

TCM 01 CL-S

I'm confident that P2R will be able to get it working fine.

Accord_V6_400m

iTrader: (1)

Ya!! Another club member, I feel sorry for the poor sap that I run over, hes goingn to hit IM like no other no crumpling pf any kind.

So what kinds of plans are there for anodizing color wise, how about polishing?

TCM 01 CL-S

I can tell you that black is going to be one of the options.

Accord_V6_400m

iTrader: (1)

How can you do that? Do you know something we don't

sinfulj32

accord_v6... have you swapped guys thought of doing this with your hood for clearance? its a quik mod

cl8trr

im gonna have to do that to my K20a rex, the hood wont close!!! crap!! oh well, you guys know of any hatches(shell) for sale? no salvages and si preffered.. paint dont matter im sending it to get painted, sorry for the hi jack but its a good place to get some 411..

Accord_V6_400m

iTrader: (1)

Yeah i've thought about that whole cowl induction thing but my car isn't supposed to draw attention like that, kind of defeats the point of my sleeper sedan if the hood is proped up like that, that, or it just looks cheap like the body shop messed up.

2003TL-S

Just PM PowerRev and ask what colors. He told me they were going to make them black a few weeks ago.

2003TL-S

^^ I agree that looks really cheap, not how a CL/TL is supposed to look. If the Pilot spacer CLeanCL and I bought won't fit our cars, I don't know about him, but I will just take the spacer out until I can find a better solution to making it fit.

fsttyms1

6 speed swap as well. I did manage to get the plastic engine cover to fit on with no cutting of any kind but its close. very close

Yea the spacer is

TCM 01 CL-S

It's the color I'm getting! Sean @ P2R gave me two options at the time when I called him, black being one of them.

Nov!ce

I've just learned of this mod. Excuse my ignorance, but in essence does this mod take off where the Outlaw Engineering thermoblock spacer left off? As in, the material it's made with will also reduce the transfer of heat, but will also increase the volume of air in the intake manifold? Correct me, if I'm wrong.

sinfulj32

didnt know your car was supposed to be a sleeper

CleanCL

iTrader: (4)

well it is a sedan =X

but i see no reason this shouldn't fit under the hood of an accord... even with the j32 swap.. the only real difference is everything internal.. actually the blocks are almost identical.

cl8trr

man im sad, the fu***n hood wont close for shit on the rex(cr-x).. I cant drive it without a hood,it looks ghetto, I need a hatch bad! yeah those spacers do look pretty bad and anyone that knows anything about swaps will know whats going on under the hood,I want the cr-x low pro because if word gets around about the k its almost a certain to be targeted for theft... anyone wanna buy it as is? $8300?? 12 sec 1/4 times... im done dealing with it

sinfulj32

yo quit hijackin p2r's thread. its bad as it is already that were talking about other ways to pick up power other than p2r parts. i think we needa keep it on topic with the P2R Plenums.

Accord_V6_400m

iTrader: (1)

Have you tried cutting your hood supports? it will make the middle of the hood flimsier but nothing aestethically bad, unless while cutting the supports you dent the hood from underneath like me leaving a scar on the other side

I just got tired of the IM cover plate rubbing on the hood supports with no spacer in there. So I just said f'it and cut the middle ones out. Not sure how much space I have left but its not much.

The IM is much taller hence the problem, its the stuff on the engine that gives us the height problem

Yeah its a semi-sleeper, when I drive it people now its a stick and what not but it has such an OEM appeal to it with a pretty much stock interior and exterior.

CleanCL

iTrader: (4)

i still think P2Rs plenums might fit... judging from their pictures, they didn't increase in height, the stock plenum cover is still the highest point... unless you were talking about the spacer.

CleanCL

iTrader: (4)

PowerRev - question... one thing i noticed after i sent my intake manifold to extrude hone.. the plenum gaskets were restricting inside... i used a dremel to trim the metal gasket to create a flush space inside the plenum... does this matter at all?

Accord_V6_400m

iTrader: (1)

I was refering to the spacer, but now that you mention it the fact that the plenum chambers from P2R extend out a little further, it could hit the inside of the sloped hood, at least for me, not sure but its possible.

gc86

So whats going on with the dynos? im sure some have already gotten their plenums, when is your dyno appointment scheduled for?

TCM 01 CL-S

Thursday or Friday

rush

iTrader: (1)

Yes Pls. And Where Can I Get It?

TCM 01 CL-S

Our vendor Excellerate sells them.

Harrisonk531616

getting my Plenums Tuesday. Going to do Pre-dyno today! must change oil!

PowerRev

Plenums are finished up finally. And they are shipping out today. Was suppose to ship out on friday, but didnt have fittings. So they will ship today

dannycls

wow those look nice...time to save some money for those

CleanCL

iTrader: (4)

any word on trimming the plenum gasket?

TCM 01 CL-S

Any pictures of the black ones?

I can't wait to put these on and get dyno tuned.

TCM 01 CL-S

Speaking of which my boomslang harness is expected to be here wednesday.

02type-s

x2

krisdlm

iTrader: (1)

x3, those look pretty sick

INSPIRE 32V

iTrader: (1)

so whats the price on these puppies

LIPPSTUH

iTrader: (2)

wow that thing looks so shiny... i like. i'd like to see pix of it installed + dynos =D